to DMG-Lib main page
Home  · Site map  · Contact  ·

Advanced Search   Mechanism Search

International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)

thumbnail
Dokument öffnen (benötigt JavaScript)   Open document

General information

Author Kovacs, Francisc; Sályi, István; Biro, I.; Deák, L.; Mătieş, Vistrian; Mătieş, M.; Rusu, Calin; Alecu, Lucian; Olaru, G.; Alexandru, Petre; Vişa, Ion; Alexandru, Catalin; Barbu, I.; Antonescu, Păun; Petrescu, Fl.; Antonescu, Ovidiu; Antonya, Csaba; Bârsan, Lucian; Bârsan, Anca; Jaliu, Codruța; Ciauşu, Viorel; Merticaru, Eugen; Daj, I.; Stareţu, Ionel; Andraş, I.; Dijksman, Evert A.; Smals, Anton T.J.M.; Duca, Cezar; Dudiţă, Florea; Bîrzan, F.; Diaconescu, F.; Neagoe, M.; Galabov, V.; Nikolov, N.; Golovin, Alexander; Ibragimov, A.; Tumanov, I.; Di Gregorio, R.; Itul, Tiberiu; Lazăr, I.; Tempea, Iosif; Kim, Y. G.; Peelamedu, S.; Naganathan, N.; Dukkipati, R.; Lee, S.; Majumder, I.; Lateş, Mihai; Jula, Aurel; Diaconescu, Dorin; Nanu, Gheorghe; Cernăianu, C.; Vătu, D.; Năstăsescu, V.; Roşca, D.; Niţescu, Nicolae; Morong, B.; Stoian, Anne-Marie; Ocnărescu, C.; Olea, G.; Takamasu, K.; Oprişan, C.; Orănescu, Amedeu; Stroe, G. S.; Perju, Dan; Mesaroş-Anghel, Voicu; Popescu, Iulian; Sass, L.; ...
Published  Mirton, Timişoara, 2000
Edition  
Extend  
ISBN
Collections
Books
2000 and later
Parts
 
thumbnail of12423009 The Role Played by Mechanisms in the Technology of the Beginning of the XXI st. Century, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Kovacs, Francisc
Published: 2000
thumbnail of12424009 Gedanken über die Lehre der Mechanismen, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Sályi, István; Biro, I.; Deák, L.
Published: 2000
thumbnail of12425009 Mechatronic philosophy in practice and engineering education, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mătieş, Vistrian; Mătieş, M.; Rusu, Calin
Published: 2000
thumbnail of12426009 The operational space’s crogeometrical analysis of the R RIIR kinematic chain, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Alecu, Lucian; Olaru, G.
Published: 2000
thumbnail of12427009 Contributions Presented at MTM Syposium Regarding the Steering and Suspension Mechanisms of Automobiles, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Alexandru, Petre; Vişa, Ion
Published: 2000
thumbnail of12428009 The Modeling of the Elastic and Damping Elements from the Suspension System of the Cars Axle, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Alexandru, Catalin; Barbu, I.
Published: 2000
thumbnail of12429009 Synthesis of the Rotary Cam Profile with Balance Follower, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Antonescu, Păun; Petrescu, Fl.; Antonescu, Ovidiu
Published: 2000
thumbnail of12430009 Contributions to Modeling and Simulation of Kinematics Geometry of Planar Linkages, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Antonescu, Ovidiu; Petrescu, Fl.; Antonescu, Păun
Published: 2000
thumbnail of12432009 Some Aspects Regarding the Improving of Cam Mechanisms’ Efficiency, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bârsan, Lucian; Bârsan, Anca
Published: 2000
thumbnail of12433009 Design Methodology of the Curved Slotted Geneva Mechanism, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bârsan, Anca; Bârsan, Lucian; Jaliu, Codruța
Published: 2000
thumbnail of12434009 Study of the Influence of the Redundant Constraints from the Structure of the Mechanisms on the Motion Law, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Ciauşu, Viorel; Merticaru, Eugen
Published: 2000
thumbnail of12435009 Kineto-Static Calculus Form of Ranging Arm Operating System Having Structurally Integrated Gear Transmission for Working Unit Actiuation, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Daj, I.; Stareţu, Ionel; Andraş, I.
Published: 2000
thumbnail of12436009 Ackermann's Steering Principle behind the Optimization of Six-Bar Steering Linkages having a Rectilinear Translating Rack and having an Infinite to the Third Number of Function-Cognates, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dijksman, Evert A.; Smals, Anton T.J.M.
Published: 2000
thumbnail of12437009 The Rotability of the Four Bar Spatial Mechanism (RSSR), in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Duca, Cezar
Published: 2000
thumbnail of12438009 Upon the Synthesis of Displacement Programs Used in Cam Mechanisms, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dudiţă, Florea; Bârsan, Anca; Bârsan, Lucian; Bîrzan, F.
Published: 2000
thumbnail of12439009 A General Algorithm Used in Precision Modelling of Orienting Parallel-Structures, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dudiţă, Florea; Diaconescu, F.; Neagoe, M.
Published: 2000
thumbnail of12440009 Synthesis of a Class of Function Generator Mechanisms with Ten-Bar Topological Structure, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Galabov, V.; Nikolov, N.
Published: 2000
thumbnail of12441009 Mechanical Analogue of Caterpillar, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Golovin, Alexander; Ibragimov, A.; Tumanov, I.
Published: 2000
thumbnail of12442009 Closed-form Solution of the Position Analysis of the Pure Translational 3-RUU Parallel Mechanism, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Di Gregorio, R.
Published: 2000
thumbnail of12444009 Allgemeines Zahnprofil: Geometrisches Modell und Verzahnungstechnologie – Prinzipien, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Kovacs, Francisc
Published: 2000
thumbnail of12445009 Sur l’engendrement des schémas cinématiques des mécanismes d’escamotage de la troisiéme classe, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Lazăr, I.; Tempea, Iosif
Published: 2000
thumbnail of12446009 A Real Time Collision Avoidance Algorithm, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Kim, Y. G.; Peelamedu, S.; Naganathan, N.; Dukkipati, R.
Published: 2000
thumbnail of12447009 Link and Actuator Dynamics for Flexible Manipulators, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Lee, S.; Peelamedu, S.; Naganathan, N.; Dukkipati, R.
Published: 2000
thumbnail of12448009 Collision Detection Algorithm for an Automated Guided Vehicle, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Majumder, I.; Peelamedu, S.; Naganathan, N.; Dukkipati, R.
Published: 2000
thumbnail of12449009 Concerning to Kinematics of Tripod Coupling with Point in Frame Contacts, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Lateş, Mihai; Jula, Aurel; Diaconescu, Dorin
Published: 2000
thumbnail of12452009 Consideration ver l’étude dynamique de chaines cinématiques sous l’influence d’un champ thermique exteruier, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Năstăsescu, V.; Roşca, D.
Published: 2000
thumbnail of12453009 Influence de la non-linéarité de la caractéristique du système élastique du stand du transporteur vibrant sur le functionnement de celui-ci, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Niţescu, Nicolae; Morong, B.; Stoian, Anne-Marie
Published: 2000
thumbnail of12456009 Analytic Models in the Synthesis of the Adjustable in Steps Mechamisms, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Oprişan, C.
Published: 2000
thumbnail of12457009 Ways of Solving Systhesis Problems for the Frontal Loaders Mechanisms, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Oprişan, C.
Published: 2000
thumbnail of12459009 A New wiewpoint Regarding Motion Generating Mechanisms Synthesis, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Perju, Dan; Mesaroş-Anghel, Voicu
Published: 2000
thumbnail of12460009 La synthèse géometrique exacte d’un mécanisme qui trace une courbe a point triple, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popescu, Iulian; Sass, L.
Published: 2000
thumbnail of12461009 The Position Analysis of the Spatial Parallel Mechamsims Actuated by Linear Motors, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Rădulescu, Corneliu
Published: 2000
thumbnail of12462009 The Experimental Methods for the Identification of Mechanical System without the Scavenging of Frequency, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Receanu, Dănuţ
Published: 2000
thumbnail of12463009 An Experimental Method for the Identification of Mechanical System with the Scavenging of Frequency, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Receanu, Dănuţ
Published: 2000
thumbnail of12464009 A Method for Analysis of Mechanical System with More Degrees of Freedom, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Receanu, Dănuţ
Published: 2000
thumbnail of12465009 La synthèse géométrique exacte d’un mécanisme qui trace une courbe cubique circulaire, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Sass, L.; Popescu, Iulian
Published: 2000
thumbnail of12466009 La synthèse géométrique exacte d’un mécanisme ellipsographe et d’un mécanisme de linéarité, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Sass, L.; Popescu, Iulian
Published: 2000
thumbnail of12467009 The Kinetostatics of a Plane Articulated Mechanism with Six Elements, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Săplăcan, M.; Zamfir, V.; Balog, C.
Published: 2000
thumbnail of12468009 Possible Solutions for the Synthesis of the Main Mechanism of the Double-Loop Retractabel Mechanism, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Tempea, Iosif; Lazăr, I.
Published: 2000
thumbnail of12469009 Mechanisms of Logical Command with Mechanical Elements that Realise the Algorithms of the Turing Machine, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Tisan, Vasile
Published: 2000
thumbnail of12470009 Synthesis of Six-Link Stephenson’s Mechanism for Loop-Forming Device, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Todorov, T.; Milkov, M.
Published: 2000
thumbnail of12471009 Aspects Concerning the Analysis of dynamic Stability for the Flexible Mechanism with Mathieu Diagram, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Vătu, D.; Nanu, Gheorghe
Published: 2000
thumbnail of12472009 Structural Synthesis of the Multiple Spatial Guiding Linkages used for Rear Wheels of the Cars, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Vişa, Ion; Alexandru, Catalin; Vereş, C.
Published: 2000
thumbnail of12473009 The Analysis of a Mechanism for Self-Shifting of Coal Cutter Loaders, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Zamfir, V.; Dumitrache, G.
Published: 2000
thumbnail of12474009 Analytische Untersuchung der Spannungen und Verformungen von Laschenkupplungen durch die Methode der finite Elemente, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Albuţiu, Claudia; Davidescu, Arjana
Published: 2000
thumbnail of12475009 Operating and Brake System for Tangential Belt Drive Testing, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Andreiciuc, D.; Jula, Mihaela
Published: 2000
thumbnail of12476009 Contributions to Kinetostatic Calculus of a New Cycloidal Swing Link Speed Reducer, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Anghel, Ştefan; Anghel, Cristian
Published: 2000
thumbnail of12477009 On Design of Swing Link Cycloidal Speed Reducer, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Anghel, Ştefan; Anghel, Cristian
Published: 2000
thumbnail of12478009 A Computer Program for the Sliding Equalizing at the Helical Gears, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Antal, A.; Antal, T.
Published: 2000
thumbnail of12479009 Heat Distribution Comparison Analysis in Radial PTFE Seals, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Argeşanu, Veronica; Mocuţa, Georgeta A.
Published: 2000
thumbnail of12480009 Some Aspects of Dynamic Behavior of Helical Gear Pairs, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Atanasiu, Virgil
Published: 2000
thumbnail of12481009 An Approach of Load Sharing Ratio in Spur Gear Pairs, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Atanasiu, Virgil
Published: 2000
thumbnail of3247009 Kinematische Analyse von Räderkurvengetrieben, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Modler, Karl-Heinz; Goldhahn, Horst; Lovasz, Erwin-Christian; Wadewitz, Clemens
Published: 2000
thumbnail of12482009 An Estimation of Tribological Parameters of Helical Gear Pairs Incorporating Tooth Load Sharing, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Atanasiu, Virgil; Leohchi, Dumitru; Hostiuc, L.
Published: 2000
thumbnail of12504009 The Kinetostatics of the frontal-Sinusoidal Transmissions with Balls, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bara, Mircea Viorel; Handra-Luca, Viorel
Published: 2000
thumbnail of12505009 The Dynamics of the Frontal-Sinusoidal Transmission with Balls, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bara, Mircea Viorel
Published: 2000
thumbnail of12506009 Theoretical Apects Concerning the Division of the Momentum in Stepped Frontal Transmissions, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bara, Mircea Viorel
Published: 2000
thumbnail of12507009 The Influence of the Sliding Speed in the Contact Point of the Lubrification Conditions for the Circular Arc Shaped Gearing, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bărăscu, E.
Published: 2000
thumbnail of12508009 Contact Stresses in a Ceramic Ball Bearing, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bîrleanu, C.; Sucală, Felicia; Căzilă, A.
Published: 2000
thumbnail of12511009 Features About Finite Elemente Analysis of Syncronous Belt Tooth Deflection, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Butnariu, Silviu
Published: 2000
thumbnail of12512009 Load Pressure Distribution Along Thooth Flank as a Function on Thooth Contact Pattern Shape and Position, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Cănănău, S.; Dobre, George
Published: 2000
thumbnail of12513009 Inputs for the Gears Calculation from Final Transmisiions of the Automobiles, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Chişu, Emil; Moldovean, Gheorghe; Velicu, Doru; Gavrilă, Cornel Catalin
Published: 2000
thumbnail of12514009 The Applying of the Simplified Modelling Method for Efficiency and Real Power Circulation in Planetary Gears, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Diaconescu, Dorin; Chişu, Emil; Neagoe, M.; Jaliu, Codruța
Published: 2000
thumbnail of12515009 Criteria for Organising in Gear Material Data, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dobre, George; Mirică, Radu Florin; Cănănău, S.
Published: 2000
thumbnail of12516009 Finite Element Method in Dynamic Study of the Contact Involute Cylindrical Gears, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dumitru, Nicolae; Vătu, D.
Published: 2000
thumbnail of12517009 Flexicoil Type Springs used for the Secondary Suspension of the Electric Locomotive CFR 060-EA of 5100 KW, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dungan, Luisa-Izabel; Mădăras, Lucian; Dungan, Mircea
Published: 2000
thumbnail of12518009 Railway Vehicles Suspensions, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dungan, Luisa-Izabel; Mădăras, Lucian; Dungan, Mircea
Published: 2000
thumbnail of12519009 Transmission Ratio of the Percussion-Factor Determinant in the Mills with Hammers Work, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Fenchea, Mircea
Published: 2000
thumbnail of12520009 Comparative Study Concerning the Mills with Hammers Works, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Fenchea, Mircea
Published: 2000
thumbnail of12521009 Influence of the Percussion centre about uniformity Motion of the Rotor, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Fenchea, Mircea; Florea, Mariana
Published: 2000
thumbnail of12522009 Theoretical and Experimental Research Regarding the Warm Pipelines Behaviour at High temperatures, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Grigore, Niculaie
Published: 2000
thumbnail of12524009 Contributions on Determining the Forces Distributions in the Toothed Harmonic Drive (T.H.D.), in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Ianici, Sava
Published: 2000
thumbnail of12525009 About the Initial Tensioning of Tangential Belt Drive, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Jula, Mihaela; Mădăras, Lucian
Published: 2000
thumbnail of12526009 The Tensions on the Slack and Tight Part of a Tangential Belt Drive, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Jula, Mihaela
Published: 2000
thumbnail of12527009 Le calcul de vitese angulair de la perceuse pneumatique, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Maniu, Inocentiu
Published: 2000
thumbnail of12528009 Preparation of Main Parameters for Designing of Continous Casting Machine, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mazankova, M.; Hicusek, J.
Published: 2000
thumbnail of12529009 Roller Mill Main Drive Calculus, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mărgineanu, Dan; Mălaimare, Gabriel; Margineanu, Eugenia
Published: 2000
thumbnail of12530009 Spline Joints Rigidity, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mărgineanu, Dan; Margineanu, Eugenia
Published: 2000
thumbnail of12531009 Influence on Laying Process of Coils for the Helical Springs with Variable Geometry, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Militaru, Rodica; Ionescu, Nelu
Published: 2000
thumbnail of12532009 Chosing the Proper Elasticity Characteristic for the Road Vehicles Suspension, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Militaru, Rodica; Gligor, Octavian
Published: 2000
thumbnail of12533009 Construction of Load-Deflection Characteristic for Springs with Variable Geometry, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Militaru, Rodica; Militaru, Cornel
Published: 2000
thumbnail of12534009 Sur la modelisation de la familie des courbes de Wöhler pour la sollicitation du pied de la dent, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mirică, Radu Florin; Dobre, George; Cănănău, S.
Published: 2000
thumbnail of12535009 FEM Analysis of Different Types of Welded Joints Identicaly Charget, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mocuţa, Georgeta A.; Argeşanu, Veronica
Published: 2000
thumbnail of12536009 Aspects Concerning Design of Flexible Couplings with Steel Beam Springs, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mogan, Gheorghe; Lateş, Mihai
Published: 2000
thumbnail of12537009 Inputs for the Gears Calculation from Three Shafts Gearboxes of the Automobiles Transmissions, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Moldovean, Gheorghe; Velicu, Doru; Chişu, Emil
Published: 2000
thumbnail of12538009 Mechanical Characteristic Influence on the Dynamic Response of a Bimobile Planetary Gears Transmission, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Neagoe, M.; Diaconescu, Dorin; Munteanu, Olimpiu
Published: 2000
thumbnail of12539009 A Calculating Method of the Locking Coefficient of the Torsen Torque Sensing Differential, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popa, I. F.; Predescu, L.
Published: 2000
thumbnail of12540009 Studies Regarding the Geometry Characteristics Influence of the Helical Gears on the Differential Locking Coefficient Torsen, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popa, I. F.; Predescu, L.
Published: 2000
thumbnail of12541009 An Analysis of the Efficiency of the Involute Gears, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popovici, G. A.; Oprişan, C.
Published: 2000
thumbnail of12543009 Application of Minimum Action Principle at Mechanisms, which Have Various Degrees of Mobility, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Teodorescu, Adriana
Published: 2000
thumbnail of12544009 Experimental Determination of Power Fluxes at a Differential Mechanism, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Teodorescu, Adriana
Published: 2000
thumbnail of12545009 Test Rig to Investigate Friction Clutches, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Toth, S.; Nguyen Quang, H.
Published: 2000
thumbnail of12547009 Contributions a l’étude cinetostatique des accouplements de translation utilises dans la construction des robots, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Turcu, Ioan; Sucală, Felicia; Căzilă, Aurica; Bîrleanu, C.
Published: 2000
thumbnail of12548009 Contributions a l’étude cinetostatique des accouplements de rotation utilises dans la construction des robots, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Turcu, Ioan; Sucală, Felicia; Căzilă, Aurica; Bîrleanu, C.
Published: 2000
thumbnail of12550009 Algorythmus für ACAD Modellierung von Zycloid Verzahnung, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Varga, Stefan
Published: 2000
thumbnail of12551009 Computer Aided Synthesis of Two-Planetary Group Gearboxes, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Velicu, Radu; Jula, Aurel
Published: 2000
thumbnail of12552009 Principle and Application of Phosphor Termometry During Galvannealing, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Argeşanu, Veronica; Mocuţa, Georgeta A.; Atiţoaiei, V.
Published: 2000
thumbnail of12553009 Hydraulic and Pneumatic Units with Rod ar Actuator Position Sensing, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bârsan, Ioan; Breaz, R. E.
Published: 2000
thumbnail of12554009 The Pneumatic Prehensor with Automatic Gripping Force Control, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bârsan, Ioan; Racz, Gabriel
Published: 2000
thumbnail of12555009 Accuracy Torsion Bar Stand for Calibrating Dynamometric Wrenches, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bobancu, Serban
Published: 2000
thumbnail of12556009 Accuracy Balance Stand Calibrating Dynamometric Wrenches, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bobancu, Serban
Published: 2000
thumbnail of12557009 Solution of a simple Mechanism with Fine Feed Given by the Step Difference of a Two Fillets Screw, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bobancu, Serban; Oprean, Dan
Published: 2000
thumbnail of12558009 Caracterization of Same Sliding Tribosystems using State Concept, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Bratcu, O.; Spânu, C.; Rîpă, M.
Published: 2000
thumbnail of12559009 The Analysis of the Influence of Certain Cinematic and Functional Parameters Analysis on Cylindrical Gears Sliding Friction Coeficient Using a Computation Program, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Cărăbaş, Iosif; Cărăbaş, Tatiana
Published: 2000
thumbnail of12560009 The Cylindrical Gear Nominal Contact Area Analysis by Computer, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Cărăbaş, Iosif; Cărăbaş, Tatiana
Published: 2000
thumbnail of12561009 Some Aspects About Cylindrical Gear Lapping, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Cărăbaş, Iosif; Cărăbaş, Tatiana
Published: 2000
thumbnail of12562009 Experimental Researches Upon the Radar Sensor-Technological and Managerial Considerations, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Cioca, L.; Breaz, R. E.
Published: 2000
thumbnail of12615009 Study of the Rheologic and Tribologic Properties of a New Multipurpose Plastic Lubrificant, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Crăciun, A.; Crăciun, S.
Published: 2000
thumbnail of12616009 Study on Systematic Errors due to Own Weight of a Length Sample, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Davidescu, Arjana; Gruescu, Corina
Published: 2000
thumbnail of12617009 Diaphragm Pressure Transducer for Medical Applications, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dehelean, Liana Maria
Published: 2000
thumbnail of12618009 Blood Pressure Transducer, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dehelean, Liana Maria
Published: 2000
thumbnail of12619009 On the New Intelligent System Structures Inference and Acquisition, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dehelean, Nicolae Mircea
Published: 2000
thumbnail of12620009 Class Structure for Machine Elements and Assembly, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dehelean, Nicolae Mircea
Published: 2000
thumbnail of12621009 Nomographic representation of Theoretical Contact Between Steel Pivot and Sapphire Jewel, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dobra, Andreea
Published: 2000
thumbnail of12622009 Software for Generation Syncronous Belt Pulleys, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dobra, Andreea
Published: 2000
thumbnail of12623009 Simulation of the Mechanisms’ Running in MATLAB/SIMULINK, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dolga, Valer
Published: 2000
thumbnail of12624009 Computation Method for the „ROSTA” Elastic Element Predimensioning Utilized as a Spring, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dreucean, Angela
Published: 2000
thumbnail of12625009 The Designing Calculus of the Rotating Mirror Scaning Devices, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Duma, Virgil F.; Perju, Dan
Published: 2000
thumbnail of12626009 Study on Imaging of a Measuring Grating on the Photo-Detector Sensing Face, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Dumitrache, G.; Nicoară, Ioan
Published: 2000
thumbnail of12627009 Experimental Investigation of the Press Fil Joint as Tribological System, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Djurdjanovic, M.; Stamenkovic, D.; Jovanovic, S.
Published: 2000
thumbnail of12628009 On Pulmonary Hysteresis, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Frunză, M.; Frunză, G.
Published: 2000
thumbnail of12629009 Analyse of Transverse Spherical Aberration of a Tilted Lens, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Gruescu, Corina; Balaban, G.
Published: 2000
thumbnail of12630009 Shape and Spherical Aberration of a Single Lens, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Gruescu, Corina
Published: 2000
thumbnail of12631009 Modern Techniques for Capture in Medical Sonography Signals, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Ianosi, Endre; Atiţoaiei, V.; Radu, L.
Published: 2000
thumbnail of12632009 Principle of Ultrasonic Measurement of Endothelial Reactivity with Modern Techniques, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Ianosi, Endre; Atiţoaiei, V.; Radu, L.
Published: 2000
thumbnail of12633009 Appréciations sur les espaces du travail des doigts du mécanisme biologique équivalent avec le biomécanisme du pigeon, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Luca, L.
Published: 2000
thumbnail of12634009 Structure of the Soft Package Gemol for Geometrical Modelling, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Luchin, Milenco
Published: 2000
thumbnail of12635009 Gener Section of the Gemol Integrated Soft Package. General Presentation, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Luchin, Milenco
Published: 2000
thumbnail of12636009 Stages of the Gener Work-Session of the Gemol Soft Package, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Luchin, Milenco
Published: 2000
thumbnail of12637009 Erkennungs Moeglichkeiten von EMG Signalen, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mateaş, Marius; Davidescu, Arjana
Published: 2000
thumbnail of12638009 Systematizing and Designing the Actuators for Mechatronics, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mătieş, Vistrian; Mândru, Dan; Tătar, Mihai Olimpiu; Teuţan, Emil
Published: 2000
thumbnail of12639009 Peculiarities Concerning Sythesis the Basic Fucntions of the Intelligent Machines, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Mătieş, Vistrian; Mătieş, M.; Barbu, D.
Published: 2000
thumbnail of12640009 Laser Scanning Devices: the Measurement Techniques, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Perju, Dan; Duma, Virgil F.
Published: 2000
thumbnail of12641009 Consideration Regarding the Shape of Worn Profile of Coupling with Translation Motion with Application to Sliding Guides, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Petre, I.
Published: 2000
thumbnail of12642009 Autonomous Built-in Drive Units for the Realization of the Motion of Translation (Linear Actuators), in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Petrović, Tomislav; Ivanov, Ivan
Published: 2000
thumbnail of12643009 Visual Basic-Programm zur Bewertung optischer Systeme mittels Spotdiagrammen, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Pommersheim, Alfred
Published: 2000
thumbnail of12644009 Berechnung und grafische Darstellung des Gauss-Fehlers optischer Systeme, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Pommersheim, Alfred
Published: 2000
thumbnail of12645009 Berechnung und grafische Darstellung des Astigmatismus optischer Systeme, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Pommersheim, Alfred
Published: 2000
thumbnail of12649009 The Electrical Contact Resistance on Sliding Electric Contacts, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popa, Anca Sorana
Published: 2000
thumbnail of12650009 Calculation Method of the Tiredness Wear out of contact Surfaces on Mobile Electric Contacts, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popa, Anca Sorana
Published: 2000
thumbnail of12651009 L’étude sur le numéro des possililités du contact d’un mécanisme biologique équivalent avec le bioméecanisme de préhension du pigeon, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Popescu, Iulian; Luca, L.
Published: 2000
thumbnail of12652009 Quality Improvement for the Glass components of the 2nd and 3nd Generations Image Intensifiers, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Russu, M.; Nicolescu, D. P.
Published: 2000
thumbnail of12653009 The Study of Stress and Strain State of an Elastic Helicoidal Kinematic Pair, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Silaghi-Perju, Dana
Published: 2000
thumbnail of12654009 The Synthesis, Analysis and Design of Anthropomorphic Gripping Mechanism with Five Finger for Robots, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Stareţu, Ionel; Daj, I.; Albu, Neculai
Published: 2000
thumbnail of12655009 The Synthesis, Analysis and Design of Anthropomorphic Gripping Mechanism Used Like Human Hand Prothesis, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Stareţu, Ionel; Albu, Neculai; Neagoe, Mircea
Published: 2000
thumbnail of12656009 Friction Modeling at Very Low Velocities, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Sticlaru, Carmen
Published: 2000
thumbnail of12657009 The Materials of Tribological Joint at Very Low Velocities, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Sticlaru, Carmen
Published: 2000
thumbnail of12658009 Pressure Distribution and Wear Cutter Model for Manufacturing Winkler Material, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Tache, C.; Tudor, Andrei
Published: 2000
thumbnail of12659009 Concepts Regarding the Development of the Intelligent Optical Systems, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Vâsc, A.; Creţu, Emil
Published: 2000
thumbnail of12660009 Architectures for Optical Processing of incoherent Information, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Vâsc, A.; Creţu, Emil
Published: 2000
thumbnail of4544009 Rechnerische Lösung von Aufgaben der Koppelgetriebe Mechanik, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Rehwald, Willi
Published: 2000
thumbnail of3522009 The Influence of the Rigidity and Joint Size on the Motion Characteristics of the Compliant Mechanisms, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Christen, Gerhard; Pavlović, Nenad D.; Pavlović, Nenad T.
Published: 2000
thumbnail of27770009 Contribution sur la cinematique des chains cinematiques, utilisant le notion de mecanique computationelle, in: International Symposium on Mechanisms and Mechanical Transmissions. MTM (8, 2000, Timișoara)
Author: Nanu, Gheorghe; Vătu, Daniela
Published: 2000
Linked items
Documents: Kinematische Analyse von Räderkurvengetrieben
The Influence of the Rigidity and Joint Size on the Motion Characteristics of the Compliant Mechanisms
Rechnerische Lösung von Aufgaben der Koppelgetriebe Mechanik
The Role Played by Mechanisms in the Technology of the Beginning of the XXI st. Century
Gedanken über die Lehre der Mechanismen
Mechatronic philosophy in practice and engineering education
The operational space’s crogeometrical analysis of the R RIIR kinematic chain
Contributions Presented at MTM Syposium Regarding the Steering and Suspension Mechanisms of Automobiles
The Modeling of the Elastic and Damping Elements from the Suspension System of the Cars Axle
Synthesis of the Rotary Cam Profile with Balance Follower
Contributions to Modeling and Simulation of Kinematics Geometry of Planar Linkages
Some Aspects Regarding the Improving of Cam Mechanisms’ Efficiency
Design Methodology of the Curved Slotted Geneva Mechanism
Study of the Influence of the Redundant Constraints from the Structure of the Mechanisms on the Motion Law
Kineto-Static Calculus Form of Ranging Arm Operating System Having Structurally Integrated Gear Transmission for Working Unit Actiuation
Ackermann's Steering Principle behind the Optimization of Six-Bar Steering Linkages having a Rectilinear Translating Rack and having an Infinite to the Third Number of Function-Cognates
The Rotability of the Four Bar Spatial Mechanism (RSSR)
Upon the Synthesis of Displacement Programs Used in Cam Mechanisms
A General Algorithm Used in Precision Modelling of Orienting Parallel-Structures
Synthesis of a Class of Function Generator Mechanisms with Ten-Bar Topological Structure
Mechanical Analogue of Caterpillar
Closed-form Solution of the Position Analysis of the Pure Translational 3-RUU Parallel Mechanism
Allgemeines Zahnprofil: Geometrisches Modell und Verzahnungstechnologie – Prinzipien
Sur l’engendrement des schémas cinématiques des mécanismes d’escamotage de la troisiéme classe
A Real Time Collision Avoidance Algorithm
Link and Actuator Dynamics for Flexible Manipulators
Collision Detection Algorithm for an Automated Guided Vehicle
Concerning to Kinematics of Tripod Coupling with Point in Frame Contacts
Consideration ver l’étude dynamique de chaines cinématiques sous l’influence d’un champ thermique exteruier
Influence de la non-linéarité de la caractéristique du système élastique du stand du transporteur vibrant sur le functionnement de celui-ci
Analytic Models in the Synthesis of the Adjustable in Steps Mechamisms
Ways of Solving Systhesis Problems for the Frontal Loaders Mechanisms
A New wiewpoint Regarding Motion Generating Mechanisms Synthesis
La synthèse géometrique exacte d’un mécanisme qui trace une courbe a point triple
The Position Analysis of the Spatial Parallel Mechamsims Actuated by Linear Motors
The Experimental Methods for the Identification of Mechanical System without the Scavenging of Frequency
An Experimental Method for the Identification of Mechanical System with the Scavenging of Frequency
A Method for Analysis of Mechanical System with More Degrees of Freedom
La synthèse géométrique exacte d’un mécanisme qui trace une courbe cubique circulaire
La synthèse géométrique exacte d’un mécanisme ellipsographe et d’un mécanisme de linéarité
The Kinetostatics of a Plane Articulated Mechanism with Six Elements
Possible Solutions for the Synthesis of the Main Mechanism of the Double-Loop Retractabel Mechanism
Mechanisms of Logical Command with Mechanical Elements that Realise the Algorithms of the Turing Machine
Synthesis of Six-Link Stephenson’s Mechanism for Loop-Forming Device
Aspects Concerning the Analysis of dynamic Stability for the Flexible Mechanism with Mathieu Diagram
Structural Synthesis of the Multiple Spatial Guiding Linkages used for Rear Wheels of the Cars
The Analysis of a Mechanism for Self-Shifting of Coal Cutter Loaders
Analytische Untersuchung der Spannungen und Verformungen von Laschenkupplungen durch die Methode der finite Elemente
Operating and Brake System for Tangential Belt Drive Testing
Contributions to Kinetostatic Calculus of a New Cycloidal Swing Link Speed Reducer
On Design of Swing Link Cycloidal Speed Reducer
A Computer Program for the Sliding Equalizing at the Helical Gears
Heat Distribution Comparison Analysis in Radial PTFE Seals
Some Aspects of Dynamic Behavior of Helical Gear Pairs
An Approach of Load Sharing Ratio in Spur Gear Pairs
An Estimation of Tribological Parameters of Helical Gear Pairs Incorporating Tooth Load Sharing
The Kinetostatics of the frontal-Sinusoidal Transmissions with Balls
The Dynamics of the Frontal-Sinusoidal Transmission with Balls
Theoretical Apects Concerning the Division of the Momentum in Stepped Frontal Transmissions
The Influence of the Sliding Speed in the Contact Point of the Lubrification Conditions for the Circular Arc Shaped Gearing
Contact Stresses in a Ceramic Ball Bearing
Features About Finite Elemente Analysis of Syncronous Belt Tooth Deflection
Load Pressure Distribution Along Thooth Flank as a Function on Thooth Contact Pattern Shape and Position
Inputs for the Gears Calculation from Final Transmisiions of the Automobiles
The Applying of the Simplified Modelling Method for Efficiency and Real Power Circulation in Planetary Gears
Criteria for Organising in Gear Material Data
Finite Element Method in Dynamic Study of the Contact Involute Cylindrical Gears
Flexicoil Type Springs used for the Secondary Suspension of the Electric Locomotive CFR 060-EA of 5100 KW
Railway Vehicles Suspensions
Transmission Ratio of the Percussion-Factor Determinant in the Mills with Hammers Work
Comparative Study Concerning the Mills with Hammers Works
Influence of the Percussion centre about uniformity Motion of the Rotor
Theoretical and Experimental Research Regarding the Warm Pipelines Behaviour at High temperatures
Contributions on Determining the Forces Distributions in the Toothed Harmonic Drive (T.H.D.)
About the Initial Tensioning of Tangential Belt Drive
The Tensions on the Slack and Tight Part of a Tangential Belt Drive
Le calcul de vitese angulair de la perceuse pneumatique
Preparation of Main Parameters for Designing of Continous Casting Machine
Roller Mill Main Drive Calculus
Spline Joints Rigidity
Influence on Laying Process of Coils for the Helical Springs with Variable Geometry
Chosing the Proper Elasticity Characteristic for the Road Vehicles Suspension
Construction of Load-Deflection Characteristic for Springs with Variable Geometry
Sur la modelisation de la familie des courbes de Wöhler pour la sollicitation du pied de la dent
FEM Analysis of Different Types of Welded Joints Identicaly Charget
Aspects Concerning Design of Flexible Couplings with Steel Beam Springs
Inputs for the Gears Calculation from Three Shafts Gearboxes of the Automobiles Transmissions
Mechanical Characteristic Influence on the Dynamic Response of a Bimobile Planetary Gears Transmission
A Calculating Method of the Locking Coefficient of the Torsen Torque Sensing Differential
Studies Regarding the Geometry Characteristics Influence of the Helical Gears on the Differential Locking Coefficient Torsen
An Analysis of the Efficiency of the Involute Gears
Application of Minimum Action Principle at Mechanisms, which Have Various Degrees of Mobility
Experimental Determination of Power Fluxes at a Differential Mechanism
Test Rig to Investigate Friction Clutches
Contributions a l’étude cinetostatique des accouplements de translation utilises dans la construction des robots
Contributions a l’étude cinetostatique des accouplements de rotation utilises dans la construction des robots
Algorythmus für ACAD Modellierung von Zycloid Verzahnung
Computer Aided Synthesis of Two-Planetary Group Gearboxes
Principle and Application of Phosphor Termometry During Galvannealing
Hydraulic and Pneumatic Units with Rod ar Actuator Position Sensing
The Pneumatic Prehensor with Automatic Gripping Force Control
Accuracy Torsion Bar Stand for Calibrating Dynamometric Wrenches
Accuracy Balance Stand Calibrating Dynamometric Wrenches
Solution of a simple Mechanism with Fine Feed Given by the Step Difference of a Two Fillets Screw
Caracterization of Same Sliding Tribosystems using State Concept
The Analysis of the Influence of Certain Cinematic and Functional Parameters Analysis on Cylindrical Gears Sliding Friction Coeficient Using a Computation Program
The Cylindrical Gear Nominal Contact Area Analysis by Computer
Some Aspects About Cylindrical Gear Lapping
Experimental Researches Upon the Radar Sensor-Technological and Managerial Considerations
Study of the Rheologic and Tribologic Properties of a New Multipurpose Plastic Lubrificant
Study on Systematic Errors due to Own Weight of a Length Sample
Diaphragm Pressure Transducer for Medical Applications
Blood Pressure Transducer
On the New Intelligent System Structures Inference and Acquisition
Class Structure for Machine Elements and Assembly
Nomographic representation of Theoretical Contact Between Steel Pivot and Sapphire Jewel
Software for Generation Syncronous Belt Pulleys
Simulation of the Mechanisms’ Running in MATLAB/SIMULINK
Computation Method for the „ROSTA” Elastic Element Predimensioning Utilized as a Spring
The Designing Calculus of the Rotating Mirror Scaning Devices
Study on Imaging of a Measuring Grating on the Photo-Detector Sensing Face
Experimental Investigation of the Press Fil Joint as Tribological System
On Pulmonary Hysteresis
Analyse of Transverse Spherical Aberration of a Tilted Lens
Shape and Spherical Aberration of a Single Lens
Modern Techniques for Capture in Medical Sonography Signals
Principle of Ultrasonic Measurement of Endothelial Reactivity with Modern Techniques
Appréciations sur les espaces du travail des doigts du mécanisme biologique équivalent avec le biomécanisme du pigeon
Structure of the Soft Package Gemol for Geometrical Modelling
Gener Section of the Gemol Integrated Soft Package. General Presentation
Stages of the Gener Work-Session of the Gemol Soft Package
Erkennungs Moeglichkeiten von EMG Signalen
Systematizing and Designing the Actuators for Mechatronics
Peculiarities Concerning Sythesis the Basic Fucntions of the Intelligent Machines
Laser Scanning Devices: the Measurement Techniques
Consideration Regarding the Shape of Worn Profile of Coupling with Translation Motion with Application to Sliding Guides
Autonomous Built-in Drive Units for the Realization of the Motion of Translation (Linear Actuators)
Visual Basic-Programm zur Bewertung optischer Systeme mittels Spotdiagrammen
Berechnung und grafische Darstellung des Gauss-Fehlers optischer Systeme
Berechnung und grafische Darstellung des Astigmatismus optischer Systeme
The Electrical Contact Resistance on Sliding Electric Contacts
Calculation Method of the Tiredness Wear out of contact Surfaces on Mobile Electric Contacts
L’étude sur le numéro des possililités du contact d’un mécanisme biologique équivalent avec le bioméecanisme de préhension du pigeon
Quality Improvement for the Glass components of the 2nd and 3nd Generations Image Intensifiers
The Study of Stress and Strain State of an Elastic Helicoidal Kinematic Pair
The Synthesis, Analysis and Design of Anthropomorphic Gripping Mechanism with Five Finger for Robots
The Synthesis, Analysis and Design of Anthropomorphic Gripping Mechanism Used Like Human Hand Prothesis
Friction Modeling at Very Low Velocities
The Materials of Tribological Joint at Very Low Velocities
Pressure Distribution and Wear Cutter Model for Manufacturing Winkler Material
Concepts Regarding the Development of the Intelligent Optical Systems
Architectures for Optical Processing of incoherent Information
Contribution sur la cinematique des chains cinematiques, utilisant le notion de mecanique computationelle
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?docum=12422009
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_docum_12422009.html
Data provider
UPTUP Timisoara  http://mecatronica.mec.upt.ro
Administrative information
Time of publication 2000

nach oben up
×