to DMG-Lib main page
Home  · Site map  · Contact  ·
DMG-Lib Home + News
Browse
Search
Experience DMG-Lib
About us
Help
 		 
Advanced Search   Mechanism Search

Six bar linkage. RRR kinematic chain connected in parallel with an inverted slider crank -1
Click to enlarge

Structure of mechanism
Function The mechanism contains a RRR kinematic chain connected in parallel with an inverted slider crank. The kinematic chain RRR´s joints are connected with the crank and the slider of the slider crank. By means of changing the geometrical lengths of the mechanism´s links, the coupler point M describes a range of coupler curves.
Comment The interactive animations and movies were generated for the following geometrical dimensions:
Variant 1: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 100 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 2: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 80 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 3: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 50 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 4: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 20 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 5: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 0 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 6: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -25 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 7: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -75 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 8: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -100 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 9: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -150 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 10: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -200 mm, l2 = 350 mm, l4 = 200 mm, l5 = 200 mm
Variant 11: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 100 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 12: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 80 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 13: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 50 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 14: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 20 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 15: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= 0 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 16: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -25 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 17: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -75 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 18: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -100 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 19: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -150 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm
Variant 20: x = 0 mm, y = 100 mm, l1 = 50 mm, l1´= -200 mm, l2 = 350 mm, l4 = 220 mm, l5 = 180 mm.
Dimension of mechanism planar
Number of links 6
Drive movement Rotation
Output movement Rotation combined with rectilinear translation
Degree of freedom 1
Number of inputs 1
Number of followers 1
Revolution ability yes
Revolution ability of input link yes
Relative position between drive and output parallel
 
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?mcdsc=2749025
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_mcdsc_2749025.html
Data provider
UPTUP Timisoara  http://mecatronica.mec.upt.ro
Administration
Location University "Politehnica" Timisoara, Department of Mechatronics
Producer Lovasz Erwin-Christian
Date of production 2013
Construction, material KOSIM 3.0 FKG Ges. für Antriebstechnik
Further media formats
Animations
CAX files
Images

nach oben up
Corporate information  · Data Privacy Protection Provision  · Conditions of Use      
×