Newsletter|
|
|||||||
LEVER MECHANISM OF A HYDRAULIC MULTIPLE CLAMPING DEVICE |
|||||||
|---|---|---|---|---|---|---|---|
 Ansicht vergrößern
|
Beschreibung
When piston 1 is moved downward by the action of fluid delivered to the top end of the cylinder, motion is transmitted through levers 2, 3, 4 and 5 to clamping lever 6 which turns about fixed axis A. This clamps the workpieces in V-blocks by a system of rocker clamps 7 and 8. Each clamp 8 clamps two adjacent workpieces at three points. The workpieces are released in the return stroke of piston 1 when fluid is delivered to the bottom end of the cylinder. |
||||||
| Verknüpfte Datensätze | |||||||
|
|||||||
| Permanentlinks | |||||||
|
|||||||
| Datenbereitsteller | |||||||
|
|||||||
LEVER MECHANISM OF A HYDRAULIC MULTIPLE CLAMPING DEVICE
Ansicht vergrößern
When piston 1 is moved downward by the action of fluid delivered to the top end of the cylinder, motion is transmitted through levers 2, 3, 4 and 5 to clamping lever 6 which turns about fixed axis A. This clamps the workpieces in V-blocks by a system of rocker clamps 7 and 8. Each clamp 8 clamps two adjacent workpieces at three points. The workpieces are released in the return stroke of piston 1 when fluid is delivered to the bottom end of the cylinder.
$3870$LHP,GC$
| Dokumente: |
Hydraulic, pneumatic and electric mechanisms [Streambook] |
 DMG-Lib |
 https://www.dmg-lib.org/dmglib/handler?image=26561023 |
|
 Europeana |
 http://www.europeana.eu/portal/record/2020801/dmglib_handler_image_26561023.html |
 TU Ilmenau |
http://www.tu-ilmenau.de |
GERMANY
SPAIN
ROMANIA
FRANCE
ITALY
