Open document
|
General information |
| Author |
Diaconescu, Dorin; Saulescu, Radu Gabriel; Borca, A.; Dudiţă, Florea; Alexandru, Catalin; Vişa, Ion; Antonescu, Ovidiu; Dugăeşescu, Ileana; Antonescu, Păun; Petrescu, R.; Ardelean, Ioan; Teutan, E.; Bratu, I.; Alexandru, R.; Abrudan, G.; Ciauşu, Viorel; Merticaru, Eugen; Jaliu, Codruța; Dobra, Andreea; Dumitru, A.; Petre, I.; Tache, C.; Predescu, L.; Dumitru, Nicolae; Gavrilă, Cornel Catalin; Grigore, Jan-Cristian; Pandrea, N.; Stănescu, Nicolae-Doru; Marin, C.; Martineac, Aurel; Tempea, Iosif; Mitsi, S.; Bouzakis, K. D.; Mansour, G.; Noveanu, Simona; Csibi, Vencel; Noveanu, D.; Orănescu, Amedeu; Bejenaru, Silvia; Rus, Madalina; Pandrea, Nicolae; Parlac, Sebastian; Pele, Alexandru-Viorel; Rus, Alexandru; Băban, Călin-Florin; Popa, L.; Radu, Marilena; Chişu, Emil; Tănăsescu, Ion; Zamfir, V.; Dumitrache, G.; Ridzi, M.; Virgolici, H. M.; Bara, Mircea Viorel; Brişan, Cornel; Barabaş, S.; Budală, Adrian; Jula, Aurel; Teuţan, Emil; Chira, R.; Szancsali, C.; Dijksman, Evert A.; Dobre, George; Mirică, Radu Florin; Miloiu, Gheorghe; Miloiu, Dragoş; Moldovean, Gheorghe; Velicu, Doru; ... |
| Published |
Acta Technica Napocensis, Cluj-Napoca (Rumänien), 2004
|
| Edition |
|
| Extend |
|
| ISBN |
|
|
| |
|
The Dynamic Modelling of the N-Cardan Transmissions in the Modular Variant. Part II: The Dynamic Analysis of a 3-Cardan Transmission, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Diaconescu, Dorin; Saulescu, Radu Gabriel; Borca, A.
Published: 2004
|
|
A Kinematic Systematization of the Rzeppa Ball Joints, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Diaconescu, Dorin; Dudiţă, Florea; Saulescu, Radu Gabriel
Published: 2004
|
|
Aspects Regarding the Analysis and Simulation of the Mechanisms Using Functional Virtual Prototypes, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Alexandru, Catalin; Vişa, Ion
Published: 2004
|
|
Mechanisms Used for Driving Windows of Automotive Side Doors, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Antonescu, Ovidiu; Dugăeşescu, Ileana
Published: 2004
|
|
Synthesis of Complex Mechanisms Used for Opening/ Closing of Windows on Automotive Side Doors, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Antonescu, Păun; Petrescu, R.; Antonescu, Ovidiu
Published: 2004
|
|
Aspects of Synthesis of Pantograph Mechanisms from the Structure of Measurement Systems, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Ardelean, Ioan; Teutan, E.
Published: 2004
|
|
Six-Degrees of Freedom Test Rig Design for Simulation of Mobile Machinery Vibrations, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Bratu, I.; Alexandru, R.; Abrudan, G.
Published: 2004
|
|
Algorithm for Calculation of the Reaction Forces in Packing Mechanism Considering the Redundant Constraints, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Ciauşu, Viorel; Merticaru, Eugen
Published: 2004
|
|
The Dynamic Modeling of N-CardanTransmissions in the Modular Variant. Part I: The representative Modules Modelling, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Diaconescu, Dorin; Jaliu, Codruța; Saulescu, Radu Gabriel
Published: 2004
|
|
Software for Determinate Geometrical Dimension of Internal and External Cylindrical GearWheel, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dobra, Andreea
Published: 2004
|
|
Contribution to the Kinematics Synthesis for the Adjustment Mechanisms of the Main Spindle Speed for CNC Lathes, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dumitru, A.; Petre, I.; Tache, C.; Predescu, L.
Published: 2004
|
|
About Dimensional Synthesis for the Feed Mechanism of Slides Bed from a Multiaxle Automat Lathe Structure, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dumitru, A.; Predescu, L.; Tache, C.
Published: 2004
|
|
The Elasto-Dynamical Analysis of Mechanical Mobile Systems Using Finite Element Method, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dumitru, Nicolae
Published: 2004
|
|
The Elasto-Dynamical Analysis of Mechanisms from Structure of Walking Robots, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dumitru, Nicolae
Published: 2004
|
|
Kinematics of Transversal Coupling with Four Mobile Bodies by Multibody Systems Method, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Gavrilă, Cornel Catalin; Vişa, Ion
Published: 2004
|
|
Algorithm and Calculus Program for the Dynamical Study of the Planar Mechanisms with Clearances, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Grigore, Jan-Cristian; Pandrea, N.; Stănescu, Nicolae-Doru
Published: 2004
|
|
Positional Analysis of the Four-Bar Mechanism and the Numerical Resolution of the System of Equation Using Newton Raphson Method, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Marin, C.
Published: 2004
|
|
The Constructive, Functional and Structural Study of a Symetric Pantograph, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Martineac, Aurel; Tempea, Iosif; Dugăeşescu, Ileana
Published: 2004
|
|
Position Analysis in Polynomial Form of Assur Groups of Class 3 and Order 3 Including 2 or 3 Prismatic Join, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mitsi, S.; Bouzakis, K. D.; Mansour, G.
Published: 2004
|
|
Analysis of Compliant Mechanisms Using Finite Element, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Noveanu, Simona; Csibi, Vencel; Noveanu, D.
Published: 2004
|
|
Prioritees de patrimone de l’ecole de mecanismes de Galaţi, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Orănescu, Amedeu; Bejenaru, Silvia; Rus, Madalina
Published: 2004
|
|
About the Vibrations with Excitation Through Base of the Rigid Suspended by Deformed Cinematic Chains, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Pandrea, Nicolae; Parlac, Sebastian
Published: 2004
|
|
Mathematical Model for the Dynamical Study of the Planar Mechanisms Clearances, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Pandrea, Nicolae; Stănescu, Nicolae-Doru; Grigore, Jan-Cristian
Published: 2004
|
|
Numerical Calculus in Dynamics of the Planar Mechanisms with Flexible Elements, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Pele, Alexandru-Viorel; Rus, Alexandru; Băban, Călin-Florin
Published: 2004
|
|
Contributions to the Study of Dynamic Stability of Shafts with Noncircular Section, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Popa, L.
Published: 2004
|
|
A New Elastic Coupling with Nonmetallic Elements, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Radu, Marilena; Chişu, Emil; Tănăsescu, Ion
Published: 2004
|
|
About the Dynamics of Many degrees of Freedom Mechanisms, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Stănescu, Nicolae-Doru; Grigore, Jan-Cristian; Pandrea, Nicolae
Published: 2004
|
|
Establishing the Kinetostatic Performance of a Technological Feeding Mechanism, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Zamfir, V.; Dumitrache, G.; Ridzi, M.; Virgolici, H. M.
Published: 2004
|
|
The Study of the Friction Losses in the Frontal Transmission with Balls, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Bara, Mircea Viorel; Brişan, Cornel
Published: 2004
|
|
Modelling of the Functional Performances of a Coupling with Friction Shoes and Adjestable Centrifugal Driving, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Budală, Adrian; Jula, Aurel
Published: 2004
|
|
The CAD Model of a Coupling with Friction Shoes and Adjestable Centrifugal Driving. Results and Comparisons, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Budală, Adrian; Tănăsescu, Ion; Chişu, Emil
Published: 2004
|
|
A Cycloidal Drive with Adjustable Radial Backlash, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Csibi, Vencel; Teuţan, Emil; Noveanu, Simona; Chira, R.; Szancsali, C.
Published: 2004
|
|
Separate Gears Framed at an Adjustable Distance, but Heaving a Constant Gear Well Transmission Using Auxiliary-or Chaine, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dijksman, Evert A.
Published: 2004
|
|
An Overview of the Researches at the Department of Machine Elements and Tribology from the University „Politehnica” of Bucharest in the Mechanical Transmission Field, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dobre, George; Mirică, Radu Florin
Published: 2004
|
|
Research on the Quarter Turn Actuators, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Miloiu, Gheorghe; Miloiu, Dragoş
Published: 2004
|
|
Design Methodology for Orthogonal Spiral Bevel Gears with Circular Tooth Flank. Optimal Dimensioning, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Moldovean, Gheorghe; Velicu, Doru; Velicu, Radu
Published: 2004
|
|
Planetary Reducer with Double Satellite Gear, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Niţescu, Nicolae; Simaschevici, Horia; Stoian, Anne-Marie
Published: 2004
|
|
Electrohydraulic Driver of Scraper in Dischange Hopper Waggon, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Simaschevici, Horia; Niţescu, Nicolae
Published: 2004
|
|
Aspects Concerning the Positioning Precision of Screw Planetary Gear, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Stan, Sergiu; Bara, Mircea Viorel; Mătieş, Vistrian
Published: 2004
|
|
Design Methodology for Orthogonal Spiral Bevel Gears with Circular Tooth Flank. Preliminary Calculus, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Velicu, Doru; Moldovean, Gheorghe; Velicu, Radu
Published: 2004
|
|
Planetary Gear Box with Synchronous Belts, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Tănăsescu, Ion; Budală, Adrian
Published: 2004
|
|
Calculating Gearing Theeth Actual Stresses, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Anghel, A.; Grigore, Niculaie
Published: 2004
|
|
Reability Aspects of a Mechanical Face Seal, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Argeşanu, Veronica; Mădăras, Lucian
Published: 2004
|
|
Moments of Inertia and Displacements Determination of Elastic Element Included in Helicoidal Metallic Couplings, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Cristescu, R.; Jula, Aurel
Published: 2004
|
|
Influence on the Membrane Geometry on Membrane Stress and Strain State at the Flexible Elastic Couplings, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dobre, Daniel; Dobre, George; Mirică, Radu Florin
Published: 2004
|
|
On Stress and Strain State at the Membranes Unit from Flexible Elastic Couplings, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dobre, George; Dobre, Daniel; Mirică, Radu Florin
Published: 2004
|
|
Heat Transfer Problems Mechanical Face Seals, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mădăras, Lucian; Argeşanu, Veronica
Published: 2004
|
|
Etude sur la modelisation des charges des arbres, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Miriţă, Elena; Pascu, A.
Published: 2004
|
|
The Numerical Solve on the Centrifugal Reactive Filter Equations with Newton-Raphson Method, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Stan, Mărinică; Popa, Dinel; Hara, Vasile
Published: 2004
|
|
Lubrificant Film and Pressure Distribution in Circular Contact under Impact Loading, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Andrei, G.; Walton, D.; Andrei, L.; Bîrsan, I. G.
Published: 2004
|
|
The Grinding of Gears – A Way of Processing the Teeth Flanks, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Cărăbaş, Iosif
Published: 2004
|
|
Perspectives on Secondary Seals at the Mechanical Face Seals, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Popa, N.
Published: 2004
|
|
Dynamic Loads on Helical Gears with Addendum Modifications, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Atanasiu, Virgil; Leohchi, Dumitru
Published: 2004
|
|
Solid Modeling of non – Standard Cylindrical Gears, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Andrei, L.; Epurean, A.; Andrei, G.; Mereuţă, E.; Toparau, T.
Published: 2004
|
|
The Influence of Temperature and Load on Stress and Strain of a Side Sealing, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Davidescu, Arjana; Dreucean, Mircea; Sticlaru, Carmen
Published: 2004
|
|
The FEM Analysis of a Support Blade on the Lower Maxilar, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dreucean, Mircea; Davidescu, Arjana; Sticlaru, Carmen
Published: 2004
|
|
Simulation of the Distribution and Command Hydraulic Equipments Operation, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Maniu, Inocentiu; Ciupe, Valentin
Published: 2004
|
|
Computer Aided Validation of a New Method in Dynamic Analysis of Mechanical Structures, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mereuţă, E.; Andrei, L.
Published: 2004
|
|
The Influence of Temperature and Load on Contact Area of a Side Sealing, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Sticlaru, Carmen; Davidescu, Arjana; Dreucean, Mircea
Published: 2004
|
|
Studies of Mechanical Properties of Epoxy Resin, in Various Environmental Conditions and FEM Simulation, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Tsiafis, I.; Bouzakis, K. D.; Lontos, A.
Published: 2004
|
|
Design and Development of a Sol-Gel Mini-Instalation, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mândru, Dan; Popa, Carmen; Crişan, R.
Published: 2004
|
|
A Closed Loop Temperature Control System Based on HPS „Temperature and Brightness Controlled System”, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Bălan, Radu; Mătieş, Vistrian; Hâncu, O.; Bălan, A.
Published: 2004
|
|
A Model Based Predictive Control Algorithm Applied to Nonlinear Processes, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Bălan, Radu; Mătieş, Vistrian; Hâncu, O.; Bălan, A.
Published: 2004
|
|
A Model Based Predictive Control Algorithm Applied in Motion Control, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Bălan, Radu; Mătieş, Vistrian; Hâncu, O.; Bălan, A.
Published: 2004
|
|
AVR Risc Microcontroller in command Unit of Mechatronics Systems, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Ciascai, I.; Mătieş, Vistrian; Bălan, Radu; Pop, S.
Published: 2004
|
|
About CLV (Constant Linear Velocity) Technology, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dobra, Andreea
Published: 2004
|
|
Image Processing Based Strategy for a Mobile Robot Control, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Dreucean, Mircea; Drăgulescu, Doina; Toth-Taşcău, Mirela; Jianu, C.
Published: 2004
|
|
Considerations Regarding the Mechanisms for Mechatronics, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mătieş, Vistrian; Rusu, Calin
Published: 2004
|
|
Information and Information Links in the Structure of the Mechatronic Systems, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mătieş, Vistrian; Szabo, F. S.
Published: 2004
|
|
Shape Memory alloy Composites Actuators, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Popa, Carmen; Batin, G.; Mândru, Dan; Vida-Simiti, I.
Published: 2004
|
|
Inchworm Microrobot, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Tătar, Mihai Olimpiu; Mătieş, Vistrian; Mândru, Dan
Published: 2004
|
|
L’équilibre de l’object prise dans un préhensor avec elements élastiques, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Ardelean, Ioan; Rusu, Calin; Chira, R.
Published: 2004
|
|
Raidure des elementes d’un méecanisme préhensor avec n-points de contact, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Ardelean, Ioan; Rusu, Calin; Chira, R.
Published: 2004
|
|
Modular Dynamics of Anthropomorphic Robots, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Brişan, Cornel
Published: 2004
|
|
Modular Kinematics of Anthropomorphic Robots, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Brişan, Cornel; Dög, Michael
Published: 2004
|
|
On the Geometric Calibration of a 4R Planar Parallel Robot-Structure, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Neagoe, M.; Jaliu, Codruța; Creţescu, N.
Published: 2004
|
|
On the High Order Kinematic Calibration of a 2R Planar Serial Robot-Structure, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Neagoe, M.; Munteanu, O.; Neagoe, A.
Published: 2004
|
|
Geometric Design Optimization of Spatial RR Robot Manipulator Using a Hybrid Algorithm, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Sagris, M.; Mitsi, S.; Bouzakis, K. D.; Mansour, G.
Published: 2004
|
|
Aspects Concerning the Systematization of Gripping Device with JAWS, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Stăncescu, C; Stareţu, Ionel; Bolboe, M.
Published: 2004
|
|
Imagistic Method for Topological and Kinematical – Positional Analysis of a Human Hand’s Movement, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Lovasz, Erwin-Christian; Ciupe, Valentin; Mateaş, Marius; Sîrbu, I. O.
Published: 2004
|
|
Strukturanalyse eines Handprothese, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Văcărescu, Valeria
Published: 2004
|
|
Optimale Struktursynthese eines Mechanismus für eine Handprothese mit ungelenkigen Fingern, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Văcărescu, Valeria
Published: 2004
|
|
Experimental Testing for Finishing off a Car’s Seat, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Alexandru, Petre; Antonya, Csaba; Alexandru, Catalin; Stroe, I.
Published: 2004
|
|
Téchnique de créativité dans l’enseignement téchnique, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Bobancu, S.
Published: 2004
|
|
Team-Work Student Design Projects in Reabilitation Engineering, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mândru, Dan; Crişan, R.
Published: 2004
|
|
Une méthode perfectionée dans l’appréciation de la qualité des produits, in: International Conference on Mechanims and Mechanical Transmissions. MTM (9, 2004, Cluj-Napoca)
Author: Mesaroş-Anghel, Voicu; Mădăras, Lucian
Published: 2004
|
|
Newsletter
DMG-Lib
Europeana
UP Timisoara