Mechanika: Mechanika Volumes 2006

Full-text is not available at the moment

General information
Author	Ollikainen, Mikael; Varis, Juha; Frantova, Michaela; Dundulis, Gintautas; Grybenas, A.; Klimasauskas, Arturas; Makarevicius, V.; Levinskas, R.; Vishniakas, Ivanas; Augustaitis, V.K; Šešok, N.; Iljin, I.; Žiliukas, Antanas; Kargaudas, Vytautas; Adamukaitis, Nerijus; Žiedelis, S.; Adomavičius, A.; Ognerubov, Viktor; Ankėnas, R.; Barauskas, Rimantas; Iwanow, J.; Senatorski, J.; Tacikowski, J.; Deheri, G. M.; Patel, Himanshu C.; Patel, Rakesh M.; Dagilis, Vytautas; Vaitkus, Liutauras; Kirejchick, D.; Oke, S. A.; Oyedokun, O. I.; Bamigbaiye, A.O.; Grigoryev, E.; Vasilyev, A.; Dolgov, K.; Hocine, A.; Bezazi, A.; Benamar, A.; Boubakar, Lamine; Kondratas, A.; Augonis, Mindaugas; Vorob’ev, Ye.; Kurila, Romualdas; Jakštas, Aurimas; Kaušinis, Saulius; Janecki, Hieronim P.; Miliauskas, G.; Garmus, Valdas; Radulescu, A.V.; Radulescu, Irena; Fedaravicius, Algimantas; Jonevicius, Vaclovas; Ragulskis, Minvydas; Bakšys, Bronius; Kilikevičius, Sigitas; Kačeniauskas, A.; Česnienė, J.; Vadluga, V.; Kačianauskas, R.; Malesza, M.; Miedziałowski, Cz.; Vasauskas, Vytautas; Baskutis, S.; Feldmann, D. G.; Djebala, Abderrazek; Ouelaa, N.; Hamzaoui, N.; Chaabi, Lilia; ...
Published	Kaunas University of Technology, Kaunas, 2006
Edition
Extend
ISBN

Collections

		Other publications
		2000 and later

Superordinate work

Mechanika
Author: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Published: 1995-

Parts

	Mechanika, Mechanika Volumes 2006: Human errors play a remarkable role in sheet metal industry Author: Ollikainen, Mikael; Varis, Juha Published: 2006
	Mechanika, Mechanika Volumes 2006: Modification of Chen model of plasticity for early ages applications Author: Frantova, Michaela Published: 2006
	Mechanika, Mechanika Volumes 2006: Ageing assessment of RBMK-1500 fuel channel in case of delayed hydride cracking Author: Dundulis, Gintautas; Grybenas, A.; Klimasauskas, Arturas; Makarevicius, V.; Levinskas, R. Published: 2006
	Mechanika, Mechanika Volumes 2006: Reliability estimation of the ferritic steels welded joints Author: Vishniakas, Ivanas Published: 2006
	Mechanika, Mechanika Volumes 2006: Impact of contact rings in plate and blanket cylinders of printing section’s drive on its dynamic accuracy Author: Augustaitis, V.K; Šešok, N.; Iljin, I. Published: 2006
	Mechanika, Mechanika Volumes 2006: yield stresses in compressed and bended columns and beams Author: Žiliukas, Antanas; Kargaudas, Vytautas; Adamukaitis, Nerijus Published: 2006
	Mechanika, Mechanika Volumes 2006: Impact of the specified valves characteristics on the transient processes of nuclear reactor core cooling Author: Žiedelis, S.; Adomavičius, A.; Ognerubov, Viktor Published: 2006
	Mechanika, Mechanika Volumes 2006: Finite element investigation on parameters influencing the springback during sheet metal forming Author: Ankėnas, R.; Barauskas, Rimantas Published: 2006
	Mechanika, Mechanika Volumes 2006: Comparison investigations of wear and corrosion resistance of impregnated nitride layers on carbon and alloyed steels Author: Iwanow, J.; Senatorski, J.; Tacikowski, J. Published: 2006
	Mechanika, Mechanika Volumes 2006: Performance of magnetic fluid based circular step bearings Author: Deheri, G. M.; Patel, Himanshu C.; Patel, Rakesh M. Published: 2006
	Mechanika, Mechanika Volumes 2006: Slider-link driven compressor (I). Mathematical model Author: Dagilis, Vytautas; Vaitkus, Liutauras; Kirejchick, D. Published: 2006
	Mechanika, Mechanika Volumes 2006: Numerical analysis of temperature distribution of cold cylindrical metal subjected to machining Author: Oke, S. A.; Oyedokun, O. I.; Bamigbaiye, A.O. Published: 2006
	Mechanika, Mechanika Volumes 2006: The influence of the arrangement scheme on balancing and mass dimension parameters of engines Author: Grigoryev, E.; Vasilyev, A.; Dolgov, K. Published: 2006
	Mechanika, Mechanika Volumes 2006: Multi layer tubular composite reinforced by a liner: behaviour under thermo mechanical loading simulation Author: Hocine, A.; Bezazi, A.; Benamar, A.; Boubakar, Lamine; Kondratas, A. Published: 2006
	Mechanika, Mechanika Volumes 2006: Dynamics of rigid bodies in fluid and limit eigenmodes; theoretical research Author: Kargaudas, Vytautas; Augonis, Mindaugas Published: 2006
	Mechanika, Mechanika Volumes 2006: Simulation of valve gear dynamics using generalized dynamic model Author: Vasilyev, A. Published: 2006
	Mechanika, Mechanika Volumes 2006: New types of limit states of structural alloys related to the realization of the low temperature discontinuous yielding effect Author: Vorob’ev, Ye. Published: 2006
	Mechanika, Mechanika Volumes 2006: Dynamics of wave vibrational motors Author: Kurila, Romualdas Published: 2006
	Mechanika, Mechanika Volumes 2006: Modelling of precision line scale comparator Author: Jakštas, Aurimas; Kaušinis, Saulius; Barauskas, Rimantas Published: 2006
	Mechanika, Mechanika Volumes 2006: Ferrocene derivatives in boundary lubrication Author: Janecki, Hieronim P. Published: 2006
	Mechanika, Mechanika Volumes 2006: “Droplet” problem in the aspect of modern thermal technologies Author: Miliauskas, G.; Garmus, Valdas Published: 2006
	Mechanika, Mechanika Volumes 2006: Rheological models for lithium and calcium greases Author: Radulescu, A.V.; Radulescu, Irena Published: 2006
	Mechanika, Mechanika Volumes 2006: Development of mortar simulator with shell-in-shell system – problem of external ballistics Author: Fedaravicius, Algimantas; Jonevicius, Vaclovas; Ragulskis, Minvydas Published: 2006
	Mechanika, Mechanika Volumes 2006: Insertion investigation of cylindrical parts to be assembled with clearance Author: Bakšys, Bronius; Kilikevičius, Sigitas Published: 2006
	Mechanika, Mechanika Volumes 2006: Coupled FEM simulation of turbulent flow and temperature in insulated pipes Author: Kačeniauskas, A.; Česnienė, J. Published: 2006
	Mechanika, Mechanika Volumes 2006: Numerical simulation of rupture and energy balance of 1D continuum by using discrete element method Author: Vadluga, V.; Kačianauskas, R. Published: 2006
	Mechanika, Mechanika Volumes 2006: Immediate and long-term strength tests of connections in the wood-framed structure Author: Malesza, M.; Miedziałowski, Cz. Published: 2006
	Mechanika, Mechanika Volumes 2006: Failures and fouling analysis in heat exchangers Author: Vasauskas, Vytautas; Baskutis, S. Published: 2006
	Mechanika, Mechanika Volumes 2006: Computer supported application engineering and design of hydrostatic systems Author: Feldmann, D. G. Published: 2006
	Mechanika, Mechanika Volumes 2006: Detecting mechanical failures inducing periodical shocks by wavelet multiresolution analysis. Application to rolling bearings faults diagnosis Author: Djebala, Abderrazek; Ouelaa, N.; Hamzaoui, N.; Chaabi, Lilia Published: 2006
	Mechanika, Mechanika Volumes 2006: Fracture investigation of layered composite structural elements Author: Žiliukas, Antanas; Meslinas, Nerijus; Juzėnas, Kazimieras Published: 2006
	Mechanika, Mechanika Volumes 2006: Surface area determination of ragged metallic bodies Author: Salau, Tajudeen A.; Adedokun, Oludare A.; Oke, Sunday A. Published: 2006
	Mechanika, Mechanika Volumes 2006: Motion of elastically and damping constrained part on a horizontally vibrating plane Author: Bakšys, Bronius; Ramanauskytė, Kristina Published: 2006
	Mechanika, Mechanika Volumes 2006: Stress and strain analysis of layered beams under hygrothermal and mechanical loads Author: Zabulionis, Darius Published: 2006
	Mechanika, Mechanika Volumes 2006: Calculation of parameters at elasto-plastic contact of details with different ratio of their materials hardness Author: Matlin, M.; Mozgunova, A.; Lebsky, S.; Frolova, A. Published: 2006
	Mechanika, Mechanika Volumes 2006: Investigation of dislocation structure of low carbon steel during static loading Author: Čiuplys, Antanas; Vilys, Jonas; Čiuplys, Vytautas; Kvedaras, Valdas Published: 2006
	Mechanika, Mechanika Volumes 2006: Application of MATLAB programmes set for individual drive component investigation of a section of the printing press Author: Augustaitis, V.K.; Gičan, V.; Šešok, N.; Iljin, I. Published: 2006
	Mechanika, Mechanika Volumes 2006: Parameters of automobile movement in case of braking and bumping by wheels to the vertical protrusion of road covering Author: Sokolovskij, E. Published: 2006
	Mechanika, Mechanika Volumes 2006: Research of paper/paperboard mechanical characteristics Author: Kibirkštis, Edmundas; Kabelkaitė, Asta Published: 2006
	Mechanika, Mechanika Volumes 2006: Swinging leg influence on long jump Author: Čižauskas, Ginas; Palionis, Albinas; Eidukynas, Valdas Published: 2006
	Mechanika, Mechanika Volumes 2006: Experimental investigation of parts vibratory alignment exciting immovably based part Author: Bakšys, Bronius; Baskutienė, J.; Povilionis, Algis.B. Published: 2006
	Mechanika, Mechanika Volumes 2006: Changes in material characteristics of pyrolysis furnace tube coils Author: Makhutov, N. A.; Chirkova, A.G.; Kuzeev, Maksim I. Published: 2006
	Mechanika, Mechanika Volumes 2006: Shape optimization of mechanisms’ covers Author: Dagys, Donatas; Ostaševičius, Vytautas; Gaidys, Rimvydas Published: 2006
	Mechanika, Mechanika Volumes 2006: Scratching the polymethyl methacrylate and photo resist samples using atomic force microscopy Author: Nemciauskas, Kestutis; Seniūnas, Gediminas; Snitka, V. Published: 2006
	Mechanika, Mechanika Volumes 2006: Stress and strain state investigation of soft defects on thin steel plate using experimental and numerical methods Author: K. Rasiulis; Samofalov, M.; Šapalas, Antanas Published: 2006
	Mechanika, Mechanika Volumes 2006: Investigation of relation between durability of adhesive joints of soft polymeric materials and roughness characteristics of glued surfaces Author: Mačėnaitė, Loreta; Pekarskas, Vidmantas Published: 2006
	Mechanika, Mechanika Volumes 2006: Vibration isolating couplings for operation in various excitation motions Author: Spruogis, B.; Jakštas, Aurimas Published: 2006
	Mechanika, Mechanika Volumes 2006: Effects of elastic and damping features of mechanical systems on amplitude frequency characteristics Author: Ilgakojis, P.; Merkevičius, S.; Bartaševičius, Algimantas; Jotautienė, Egle; Vainoraitė, A.; Raugaitė, R. Published: 2006
	Mechanika, Mechanika Volumes 2006: Plasma decomposition method of hazardous waste Author: Babilius, K.; Babilius, Arturas; Pakamanis, R. Published: 2006
	Mechanika, Mechanika Volumes 2006: Investigation of mechanical characteristics of polymer films for packaging production Author: Dabkevičius, Arturas; Kibirkštis, Edmundas Published: 2006
	Mechanika, Mechanika Volumes 2006: Noise mapping for the management of urban traffic flows Author: Kliučininkas, Linas; Šaliūnas, D. Published: 2006
	Mechanika, Mechanika Volumes 2006: Research on structural resistance and safety of tubular composite members Author: Kudzys, A.; Kvedaras, A.K. Published: 2006
	Mechanika, Mechanika Volumes 2006: Investigation of mechanical characteristics and low cycle fatigue of elements after electromechanical treatment Author: Daunys, Mykolas; Staponkus, Virginijus Published: 2006
	Mechanika, Mechanika Volumes 2006: Dynamics of a body vibrating according to the law of harmonics on an air-cushion Author: Bakšys, Bronius; Ramonas, Andrius Published: 2006
	Mechanika, Mechanika Volumes 2006: Employee empowerment in reducing production error amount in sheet metal fabricating industry Author: Ollikainen, Mikael; Varis, Juha Published: 2006
	Mechanika, Mechanika Volumes 2006: Development of mortar simulator with shell-in-shell system-problem of internal ballistics Author: Fedaravičius, Algimantas; Jonevičius, Vaclovas; Ragulskis, Minvydas; Survila, Arvydas Published: 2006
	Mechanika, Mechanika Volumes 2006: Comparison and substitution of conventional processes of plastic forming applying hydroforming Author: Karabegović, E.; Rošić, H.; Mahmić, M. Published: 2006
	Mechanika, Mechanika Volumes 2006: Technical and classical yarns friction properties investigation Author: Svetnickienė, Vaida; Čiukas, Ricardas Published: 2006
	Mechanika, Mechanika Volumes 2006: Establishment of maize grain elasticity on the basis of impact load Author: Volkovas, Vitalijus; Petkevičius, Sigitas; Špokas, Liudas Published: 2006
	Mechanika, Mechanika Volumes 2006: Discrete element modelling of complex axisymmetrical particle flow Author: Markauskas, D. Published: 2006
	Mechanika, Mechanika Volumes 2006: FE simulation of rupture of diaphragm with initiated defect Author: Tretjakovas, J.; Kačianauskas, R.; Šimkevičius, Č. Published: 2006
	Mechanika, Mechanika Volumes 2006: Knowledge–based method for cavity number definition in injection mold design Author: Rutkauskas, Žydrūnas; Bargelis, Algirdas; Linß, Gerhard Published: 2006
	Mechanika, Mechanika Volumes 2006: Strengthening machine elements working under abrasive environment by alloying with hard layers and their estimation Author: Jankauskas, Vytenis Published: 2006