to DMG-Lib main page
Home  · Site map  · Contact  ·

Advanced Search   Mechanism Search

SLIDER-CRANK FEEDING MECHANISM

Click to enlargeClick to enlarge Description

Bracket b is rigidly mounted on slide 1 of a press and reciprocates with the slide along vertical guides which are not shown. Link 3 is connected by turning pairs A and B to links 1 and 4. Link 4 turns about fixed axis C and is connected by turning pair E to hook 2. In the down-stroke of slide 1, hook 2 has its idle stroke, moving along the strip being blanked. In the up-stroke of slide 1, hook 2 engages a hole in strip a and shifts it to the left. The hook stroke and strip feed can be regulated by adjust ing and clamping the lower end of tie-rod 3 along the slot of link 4, and by changing the stroke of the press slide. Spring 5 holds hook 2 against strip a.
$1667$SC,SF$

Linked items
Documents: Lever mechanisms  [Streambook]
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?image=17426023
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_image_17426023.html
Data provider
ITUIlmenau TU  http://www.tu-ilmenau.de
nach oben up
×