to DMG-Lib main page
Home  · Site map  · Contact  ·

Advanced Search   Mechanism Search

Brown - figure 218

Click to enlargeClick to enlarge Description

These are parts of the same movement, which has been used for giving the roller motion in wool-combing machines. The roller to which wheel, F (218), is secured is required to make one third a revolution backward, then two thirds of a revolution forward, when it must stop until another length of combed fiber is ready for delivery. This is accomplished by the grooved heart-cam, C, D, B, and (217), the stud, A, working in the said groove ; from C to D it moves the roller backward, and from D to e it moves it forward, the motion being transmitted through the catch, G, to the notch-wheel, F, on the roller-shaft, H. When the stud, A, arrives at the point, e, in the cam, a projection at the back of the wheel which carries the cam strikes the projecting piece on the catch, G, and raises it out of the notch in the wheel, F, so that, while the stud is traveling in the cam from e to C, the catch is passing over the plain surface between the two notches in the wheel, F, without imparting any motion ; but when stud, A, arrives at the part, C, the catch has dropped in another notch, and is again ready to move wheel, F, and roller as required.

Linked items
Documents: 507 mouvements mécaniques
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?image=18927023
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_image_18927023.html
Data provider
IFMIFMA  http://www.ifma.fr
BCUBCU  http://bibliotheque.clermont-universite.fr
nach oben up
×