to DMG-Lib main page
Home  · Site map  · Contact  ·

Advanced Search   Mechanism Search

THREE-LINK TOOTHED GEARING WITH DWELLS OF THE DRIVEN GEAR AND A CIRCULAR LOCKING FEATURE

Click to enlargeClick to enlarge Description

Segment gear 1 and gear 2 rotate about fixed axes A and B. When driving segment gear 1 rotates continuously clockwise, driven gear 2 rotates together with disk d, rigidly attached to gear 2, until the teeth of segment gear 1 run out of engagement with those of gear 2. Then concentric projection a engages a concave surface b of disk d, locking gear 2 in its dwell position. To each revolution of segment gear 1, gear 2 turns through an angle equal to ϕ₂=2.2π. Therefore, following each revolution of segment gear 1, gear 2 has a dwell in a position differing from its preceding position by the angle ϕ=0.2π. The transmission ratio of the mechanism is i₁₂=z₂/z₁=(R₂/R₁)(2.2π/ϕ₁) where z₁, z₂, R₁ and R₂ are the numbers of teeth and pitch radii of segment gear 1 and gear 2, and ϕ₁ is the central angle of segment gear 1.
$2377$SG,D$

Linked items
Documents: Gear mechanisms  [Streambook]
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?image=19739023
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_image_19739023.html
Data provider
ITUIlmenau TU  http://www.tu-ilmenau.de
nach oben up
×