to DMG-Lib main page
Home  · Site map  · Contact  ·

Advanced Search   Mechanism Search

GEAR-LEVER DWELL MECHANISM

Click to enlargeClick to enlarge Description

Link 5 of four-bar linkage DCAB has gear segment b meshing with segment c of gear 6. Link 5 has pins d that engage slots a of link 6. When crank 1 rotates about fixed axis D, link 6 oscillates with dwells about fixed axis E through an angle up to 360°. To avoid impacts in the gearing, gear segments b and c are brought into and taken out of mesh by the action of pins d on slots a of link 6. The motion and dwell periods of link 6 can be varied by changing the distance between turning pairs A and B. This is done by moving slider 3 along screw 4. It is necessary, at the same time, to change the angles at which pins d are set with respect to line BA. Concentric surfaces f of link 5 engage concave surface e of link 6 to prevent unintentional rotation of link 6 during its dwell periods.
$1757$GL,D$

Linked items
Documents: Lever mechanisms  [Streambook]
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?image=25444023
Europeana FaviconEuropeana  http://www.europeana.eu/portal/record/2020801/dmglib_handler_image_25444023.html
Data provider
ITUIlmenau TU  http://www.tu-ilmenau.de
nach oben up
×