Six bar linkage. Slider crank kinematic chain connected in parallel with a slider crank -2

Estructura del mecanismo
Función	The mechanism contains a slider crank kinematic chain connected in parallel with a slider crank. The kinematic chain RRT´s joints are connected with the coupler and piston of the slider crank. By means of changing the geometrical lengths of the mechanism´s links, the coupler point M describe a range of coupler curves.
Comment	The movies and AIS were generated for more variants of geometrical dimensions: Variant 1: l1 = 16 mm, l2 = 80 mm, l2´ = 32 mm, l3 = 8 mm, l4 = 56 mm, y = -6 mm, α = 75° Variant 2: l1 = 16 mm, l2 = 80 mm, l2´ = 32 mm, l3 = 8 mm, l4 = 56 mm, y = -6 mm, α = 90° Variant 3: l1 = 16 mm, l2 = 80 mm, l2´ = 32 mm, l3 = 8 mm, l4 = 56 mm, y = -6 mm, α = 105° Variant 4: l1 = 16 mm, l2 = 80 mm, l2´ = 42 mm, l3 = 8 mm, l4 = 56 mm, y = -6 mm, α = 105° Variant 5: l1 = 16 mm, l2 = 80 mm, l2´ = 35 mm, l3 = 8 mm, l4 = 56 mm, y = -6 mm, α = 105° Variant 6: l1 = 16 mm, l2 = 80 mm, l2´ = 0 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 90° Variant 7: l1 = 16 mm, l2 = 80 mm, l2´ = 50 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 90° Variant 8: l1 = 16 mm, l2 = 80 mm, l2´ = 70 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 90° Variant 9: l1 = 16 mm, l2 = 80 mm, l2´ = 0 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 145° Variant 10: l1 = 16 mm, l2 = 80 mm, l2´ = 30 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 145° Variant 11: l1 = 16 mm, l2 = 80 mm, l2´ = 60 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 145° Variant 12: l1 = 16 mm, l2 = 80 mm, l2´ = 75 mm, l3 = 0 mm, l4 = 90 mm, y = -6 mm, α = 145°.
Dimensión del mecanismo	plano
Número de elementos	6
movimiento motor	Rotación
Movimiento de salida	Rotación combinada con traslación rectilínea
Grados de libertad	1
Número de entradas	1
Número de seguidores	1
Capacidad de rotabilidad	no
Capacidad de rotabilidad del elemento de entrada	sí
Posición relativa entre motor y salida	paralelo

Función de guía
Dirección del enlace	dirección idéntica
Orientación del elemento de salida	general
Dimensión del mecanismo	plano
Referencia de entrada	sí
Variación de la orientación con respecto al elemento de salida	varios

Collections

Mecanismos de barras

Permanent links

DMG-Lib		https://www.dmg-lib.org/dmglib/handler?mcdsc=2734025
Europeana		http://www.europeana.eu/portal/record/2020801/dmglib_handler_mcdsc_2734025.html

Data provider

UP Timisoara

http://mecatronica.mec.upt.ro

Administración

Localización		University "Politehnica" Timisoara, Department of Mechatronics
Productor		Lovasz Erwin-Christian
Fecha de producción		20.02.2013
Construcción, material		KOSIM 3.0 FKG Ges. für Antriebstechnik