Mechanika: Mechanika Volumes 2008

Full-text is not available at the moment

Informaţii generale
Autor	Kačeniauskas, A.; Zilinskaite, Ausra; Ziliukas, Antanas; Bručas, D.; Giniotis, Vytautas; Giniotis, Vytautas; Petroškevičius, Petras; Skeivalas, Jonas; Daunys, Mykolas; Stulpinaitė, A.; Yilmaz, Necip Fazil; Eyercioglu, Omer; Zhurauski, M. A.; Dragašius, Egidijus; Korobko, E. V.; Novikova, Z. A.; Maknickas, A.; Kačianauskas, R.; Kutas, R.; Karabegović, I.; Husak, Ermin; Abdelbaki, N.; Bouali, E.; Gaceb, M.; Bouzid, R.; Babilius, Arturas; Babilius, K.; Melkūnas, Regiman; Buinevičius, Kestutis; Zabulionis, Darius; Dulinskas, E.; Belevičius, Rimantas; Šešok, D.; Janulionis, R.; Dundulis, Gintautas; Grybėnas, A.; Karalevičius, R.; Bazaras, Zilvinas; Timofeev, B.T.; Vasylius, M.; Didžiokas, Rimantas; Mazeika, Pranas; Barzdaitis, Vytautas; Kumšlytis, Vigantas; Valiulis, A. V.; Černašėjus, O.; Nakutis, Žilvinas; Kaškonas, Paulius; Brisan, Cornel; Rusu, Calin; Stan, Sergiu-D.; Bălan, Radu; Mătieş, Vistrian; Leonavičius, M.; Bobyliov, K.; Krenevičius, A.; Stupak, S.; Fnides, B.; Aouici, Hamdi; Yallese, M. A.; Mizyuk, O.; Kibirkštis, Edmundas; Petraitiene, Stase; Janutienė, R. Kandrotaitė; Žvinys, J.; Leišis, Vitalis; Sudintas, A.; Žiliukas, Antanas; ...
Publicat	Kaunas University of Technology, Kaunas, 2008
Ediţie
Detaliază
ISBN

Collections

		Alte publicaţii
		2000 şi ulterior

Superordinate work

Mechanika
Autor: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Publicat: 1995-

Parts

	Mechanika, Mechanika Volumes 2008: Mass conservation issues of moving interface flows modelled by the interface capturing approach Autore: Kačeniauskas, A. Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: General deformation flow theory Autore: Zilinskaite, Ausra; Ziliukas, Antanas Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: Circular scale eccentricity analysis Autore: Bručas, D.; Giniotis, Vytautas Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: Application of photogrammetric method for height measurement instrumentation Autor: Giniotis, Vytautas; Petroškevičius, Petras; Skeivalas, Jonas Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Statistical evaluation of low cycle durability for alloyed structural steels weld metals at room and elevated temperature Autor: Daunys, Mykolas; Stulpinaitė, A. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Knowledge based reverse engineering tool for near net shape axisymmetric forging die design Autore: Yilmaz, Necip Fazil; Eyercioglu, Omer Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: Mechanical properties of smart fluids under combined electrical and magnetic fields Autore: Zhurauski, M. A.; Dragašius, Egidijus; Korobko, E. V.; Novikova, Z. A. Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: Simulation of solid specimen for compression tests by discrete particles Autor: Maknickas, A.; Kačianauskas, R.; Kutas, R. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Mathematical modeling of deep drawing force with double reduction of wall thickness Autor: Karabegović, I.; Husak, Ermin Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Influence of properties of large pipes on the reliability of pipelines Autor: Abdelbaki, N.; Bouali, E.; Gaceb, M.; Bouzid, R. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Facility for catalysts testing, research of CuO / γ – Al 2 O 3 coatings Autor: Babilius, Arturas; Babilius, K.; Melkūnas, Regiman; Buinevičius, Kestutis Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Analysis of compression zone parameters of cross-section in flexural reinforced concrete members according to EC2 and STR 2.05.05 Autor: Zabulionis, Darius; Dulinskas, E. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Global optimization of grillages using genetic algorithms Autore: Belevičius, Rimantas; Šešok, D. Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: Numerical and experimental research of the influence of hydrogen on the fracture toughness of zirconium – 2.5% niobium alloy Autor: Janulionis, R.; Daunys, Mykolas; Dundulis, Gintautas; Grybėnas, A.; Karalevičius, R. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Low cycle fatigue of materials in nuclear industry Autor: Daunys, Mykolas; Bazaras, Zilvinas; Timofeev, B.T. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: The rotating system vibration and diagnostics Autor: Vasylius, M.; Didžiokas, Rimantas; Mazeika, Pranas; Barzdaitis, Vytautas Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: The strength-related characteristics of chromium-molybdenum P5 steel dependence on postweld heat treatment parameters Autor: Kumšlytis, Vigantas; Valiulis, A. V.; Černašėjus, O. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: An approach to pneumatic cylinder on-line conditions monitoring Autor: Nakutis, Žilvinas; Kaškonas, Paulius Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Aspects concerning modeling of self-reconfigurable parallel robots Auteur: Brisan, Cornel; Rusu, Calin Publié: 2008
	Mechanika, Mechanika Volumes 2008: Modelling, design and control of 3DOF medical parallel robot Auteur: Stan, Sergiu-D.; Bălan, Radu; Mătieş, Vistrian Publié: 2008
	Mechanika, Mechanika Volumes 2008: Spheroid graphite cast iron specimens with defects cracking investigation Autor: Leonavičius, M.; Bobyliov, K.; Krenevičius, A.; Stupak, S. Publicado: 2008
	Mechanika, Mechanika Volumes 2008: Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic Autor: Fnides, B.; Aouici, Hamdi; Yallese, M. A. Publicado: 2008
	Mechanika, Mechanika Volumes 2008: Investigation of tension of flock printing materials Autor: Mizyuk, O.; Kibirkštis, Edmundas; Petraitiene, Stase Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Experimental analysis of transformation plasticity and stress relaxation of carbon spring steel during tempering Autor: Janutienė, R. Kandrotaitė; Žvinys, J. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Prediction of the strength and fracture of the fuel storage tank Autor: Leišis, Vitalis; Sudintas, A.; Žiliukas, Antanas Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Magnetic fluid based squeeze film between curved rough circular plates Autor: Deheri, G. M.; Abhangi, Nikhilkumar D. Erschienen: 2008
	Mechanika, Mechanika Volumes 2008: Load distribution in the thread of body Autor: Krenevičius, A.; Leonavičius, M.; Selivonec, J. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Impact of product modular design on agile manufacturing Autore: Kässi, Tuomo; Leisti, Simo; Puheloinen, Tuomas Pubblicato: 2008
	Mechanika, Mechanika Volumes 2008: Impact of laser and other high technologies on manufacturing efficiency in Lithuanian and Finnish sheet metalworking industry Autor: Rimašauskas, Marius; Ollikainen, Mikael; Bargelis, Algirdas; Varis, Juha Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Automatic control of longitudinal form accuracy of a shaft at grinding Autor: Marcinkevičius, Andrius H. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Incremental strategy for damage detection in structures Autor: Asma, F. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Deformation characteristic research of albumen belkozin membrane Autor: Paulauskas, Lionginas; Kairaitis, R. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Control of the stability circular knitting process with passive yarn feeding Autor: Čiukas, Ricardas; Sadauskas, D. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Reliability of a timber structure exposed to fire: estimation using fragility function Autor: Vaidogas, E. R.; Juocevičius, Virmantas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Influence of high temperature heat treatment on creep properties of high speed steel Autor: Žvinys, J.; Janutienė, R. Kandrotaitė Publicat: 2008
	Mechanika, Mechanika Volumes 2008: MATLAB implementation in direct probability design of optimal steel trusses Autor: Jankovski, V.; Atkočiūnas, Juozas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Research of complex rotary systems vibrocondition based on analysis of dynamical processes and spectrum of vibrations Autor: Juzėnas, E.; Jonušas, Remigijus; Juzėnas, Kazimieras Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Compressive strength of flock-coated packages Autor: Kibirkštis, Edmundas; Mizyuk, O.; Havenko, S. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Destruction of chains in magnetorheological fluids by high frequency oscillation Autor: Bansevičius, Ramutis; Zhurauski, M.; Dragašius, Egidijus; Chodočinskas, Sangau Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Investigation of rail metal of Kaunas fortress fortification narrow – gauge railway Autor: Žaldarys, G.; Chodočinskas, Sangau J.; Štuopys, Arminas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Hard turning of hot work steel AISI H11: Evaluation of cutting pressures, resulting force and temperature Autor: Fnides, B.; Yallese, M. A.; Aouici, H. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Utilization of waste materials for welding and surfacing Autor: Ambroza, Petras; Kavaliauskienė, Lina Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Research of abrasive erosion wear for Fe-C-Cr-B hard layers Autor: Jankauskas, Vytenis; Kreivaitis, Raimondas; Kulu, Priit; Antonov, Maksim; Milčius, D.; Varnauskas., V. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: On passive displacement-dependent damping for cab suspension Autor: Kroneld, P.; Liedes, Toni; Ruotsalainen, P.; Nevala, Kalervo Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Experimental research of rotor axis revolution orbit in rotor systems with adaptive and sleeve sliding-friction bearings Autor: Vekteris, Vladas; Čereška, Audrius; Jurevičius, Mindaugas; Striška, Vytautas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Research of strengthening plough parts by welding Autor: Jankauskas, Vytenis; Kreivaitis, Raimondas; Stonkus, D.; Andriušis, A. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: IDEF0 modelling technique to estimate and increase the process capability at the early product design stage Autor: Bargelis, Algirdas; Stasiskis, Andrius Publicat: 2008
	Mechanika, Mechanika Volumes 2008: On momentum transfer in a falling turbulent liquid film Autor: Šinkūnas, Stasys; Kiela, Algimantas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Displacement of the body on the oscillatory plane Autor: Bakšys, Bronius; Kinzhebayeva, Dinar Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Friction stir welding of aluminium alloys and damage tolerance of integral monolithic structures Autor: Richter-Trummer, Valentin; Tavares, Sergio M. O.; Moreira, P. M. G. P.; Castro, P. M. S. T. de Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Research of mine imitator interaction with nondeformable surface Autor: Fedaravičius, Algimantas; Šaulys, Povilas; Griškevičius, Paulius Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Research of force drives of the production gear hobbing machine with CNC Autor: Gichan, Vladimir; Slivinskas, Kastytis; Augustaitis, Vytautas K. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Flash welding of nonalloyed welding wire steel Autor: Hämäläinen, A-M.; Salo, Janne; Martikainen, Jukka Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Tractor ballasting in field work Autor: Janulevičius, Algirdas; Giedra, Kazimieras Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Creation and investigation of nanopositioning systems Autor: Limanauskas, Leopoldas; Nemčiauskas, Kestutis; Lendraitis, Vitas; Mizarienė, V. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Investigation of three-dimensional granular stresses in pyramidal container after filling Autor: Balevičius, Robertas; Kačianauskas, R.; Vadluga, V. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: The influence of seat pad stiffness and damping on the intervertebral forces in the junction of thoracic and lumbar spinal curves Autor: Rukuiža, Egidijus; Eidukynas, Valdas; Dulevičius, Jonas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Multiresolution derives analysis of module mechatronical systems Autor: Nowak, Andrzej; Woźniak, Marcin Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Modelling and control aspects of specific mobile robot Autor: Niţulescu, M.; Stoian, V. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Product configurator for product data management system: design of internal structure Autor: Burneika, L. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Forced vibrations of two plates in fluid and limit eigenmodes Autor: Kargaudas, Vytautas; Žmuida, M. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Modelling and investigation of the silicon membrane actuator for nanopositioning Autor: Lendraitis, Vitas; Snitka, V.; Mizarienė, V. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Nonlinear random vibrations of a sandwich beam adaptive to electrorheological materials Autor: Vaičaitis, Rimas; Liu, S.; Jotautienė, Egle Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Numerical simulation of tooth mobility using nonlinear model of the periodontal ligament Autor: Danielytė, Jovita; Gaidys, Rimvydas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Plate buckling under complex loading Autor: Žiliukas, Antanas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Fatigue life prediction for threaded joint Autor: Krenevičius, A.; Leonavičius, M. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Effect of elevated temperature and welding on low cycle fatigue strength of titanium alloys Autor: Medekshas, H. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Influence of chemical composition and structure on the properties of overlay welded structural steel Autor: Ambroza, Petras; Pilkaitė, Tilma; Chodočinskas, Sangau J. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: The wear of single flute gun drill and tool life tests Autor: Sihvo, Inga; Varis, Juha Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Experimental investigation of cylindrical parts robotic vibratory insertion Autor: Bakšys, Bronius; Kilikevičius, Sigitas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Hexapod leg control algorithm in fault conditions Autor: Stoian, V.; Niţulescu, M.; Pana, Cristina Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Modeling very early age concrete under uniaxial short-time and sustained loading Autor: Štemberk, P.; Kalafutova, P. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Fractal dynamics of a bouncing ball on accelerating lift tabletop with both constrained to vertical motion Autor: Alabi, B.; Salau, T.A.O.; Oke, S. A. Publicat: 2008
	Mechanika, Mechanika Volumes 2008: 3-D modeling of nanostructures evolution in lateral etching processes Autor: Navickas, Romualdas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Applications of high frequency vibrations for surface milling Autor: Graževičiūtė, Jurgita; Skiedraitė, Inga; Jūrėnas, Vytautas; Bubulis, Algimantas; Ostaševičius, Vytautas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Special features of breaking the welded connections of the ferritic steels Autor: Vishniakas, Ivanas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Antiwear properties of lard methyl esters and rapeseed oil with commercial ashless additives Autor: Padgurskas, Juozas; Kreivaitis, Raimondas; Jankauskas, Vytenis; Janulis, Prutenis; Makarevičienė, Violeta; Asadauskas, S.; Miknius, Linas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Analysis of parametric excited vibrations of drive shafts caused by induction machines Autor: Hantel, Peter; Bogdevičius, Marius; Spruogis, B.; Turla, Vytautas; Jakštas, Arunas Publicat: 2008
	Mechanika, Mechanika Volumes 2008: Cracking behavior of electrodeposited nanocrystalline tungsten-cobalt and tungsten-iron coatings Autor: Vasauskas, Vytautas; Padgurskas, Juozas; Rukuiža, Raimundas; Cesiulis, Henrikas; Celis, Jean-Pierre; Milčius, D.; Prosyčevas, Igoris Publicat: 2008