Mechanika: Mechanika Volumes 2005

Full-text is not available at the moment

Informazioni generali
Autore	Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; Leonavičius, Mindaugas K.; Šukšta, Marijonas; Krenevičius, A.; Stupak, S.; Varis, Juha; Martikka, Heikki; Kačianauskas, R.; Stupak, Eugenius; Stupak., S.; Royzman, V.; Bohorosh, A.; Ščemeliovas, J.; Pakalnis, Egidijus; Lasauskas, E.; Stankūnas, J.; Bentkus, R.; Kasparaitis, A.; Šukys, A.; Mohamed, Nik Abdullah Nik; Nor, Mohd Jailani Mohd; Mukhlis, Reiza Zakia; Dudkina, N. G.; Zakharov, I.; Kaminskas, V.; Bražėnas, A.; Drach, I.; Šinkūnas, Stasys; Kiela, Algimantas; Gimbutytė, I.; Šinkūnas, K.; Miliauskas, G.; Šabanas, Vaidotas; Kačeniauskas, A.; Bubulis, A.; Jūrėnas, V.; Krančiukas, R.; Bakšys, Bronius; Baskutienė, J.; Povilionis, Algis.B.; Rimašauskas, Marius; Feldmann, D. G.; Balevičius, Robertas; Hocine, A.; Bezazi, A.; Boubakar, Lamine; Benamar, A.; Kondratas, A.; Modrzyński, A.; Grześkowiak, K.; ...
Pubblicato	Kaunas University of Technology, Kaunas, 2005
edizione
Volume
ISBN

Collections

		Altre pubblicazioni
		2000 ed oltre

Superordinate work

Mechanika
Autore: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Pubblicato: 1995-

Parts

	Mechanika, Mechanika Volumes 2005: Friction torque of a rotary shaft lip type seal - a comparison between test results and finite element simulation Autore: Plath, Simon; Meyer, Stefan; Wollesen, V.M. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Integrated product and process development using rapid prototyping and rapid tooling technologies Autore: Bargelis, Algirdas; Höhne, Günter; Šačkus, A. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Stress and strain analysis of a bilayer composite beam with interlayer slip under hygrothermal loads Autore: Zabulionis, Darius Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Investigation of micro mechanic membranes with functional piezoelectric film Autore: Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Production error distribution in sheet metal industry Autore: Ollikainen, Mikael; Varis, Juha Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Features of stress strain state in specimen neck at (when) computationally modeling a tension process Autore: Bagmutov, V.; Babichev, S. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Resistance to crack propagation of alloyed structural and cast steels Autore: K. Bobyliov; Leonavičius, Mindaugas K.; Šukšta, Marijonas; Krenevičius, A.; Stupak, S. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Application of adaptive finite elements for solving elastic-plastic problem of SENB specimen Autore: Kačianauskas, R.; Stupak, Eugenius; Stupak., S. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Determination of pulse current optimal parameters for manual arc welding Autore: Ščemeliovas, J. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Convergence of lift force calculation of a tapered wing using non-linear section data Autore: Pakalnis, Egidijus; Lasauskas, E.; Stankūnas, J. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Optimization of linear precise movements Autore: Bentkus, R.; Kasparaitis, A.; Šukys, A. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Compromising vehicle handling and passenger ride comfort using er-damper Autore: Mohamed, Nik Abdullah Nik; Nor, Mohd Jailani Mohd; Mukhlis, Reiza Zakia Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Improving theory for automatic balancing of rotating rotors with liquid self balancers Autore: Royzman, V.; Drach, I. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Determination of heat transfer intensity in laminar liquid film flow Autore: Šinkūnas, Stasys; Kiela, Algimantas; Gimbutytė, I.; Šinkūnas, K. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Dam break flow simulation by the pseudo-concentration method Autore: Kačeniauskas, A. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Research and development of dosage devices for powdery products Autore: Bubulis, A.; Jūrėnas, V.; Krančiukas, R. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Experimental investigation of parts vibratory alignment under kinematical excitation Autore: Bakšys, Bronius; Baskutienė, J.; Povilionis, Algis.B. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Framework of consideration productivity for assembling operations in sheet metalworking Autore: Rimašauskas, Marius; Bargelis, Algirdas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: The use of ceramic materials for fluid power components Autore: Feldmann, D. G. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Semi analytical modelling of reinforced concrete members in bending Autore: Balevičius, Robertas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Multilayer tubular composite reinforced by a liner: behaviour under pressure loading simulation Autore: Hocine, A.; Bezazi, A.; Boubakar, Lamine; Benamar, A.; Kondratas, A. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Recycling of titanium alloys in plasma furnace Autore: Modrzyński, A.; Grześkowiak, K.; Kornacki, M. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Comparison of pipe internal pressure calculation methods based on design pressure and yield strength Autore: Bereiša, M.; Žiliukas, Antanas; Leišis, Vitalis; Jutas, Audrius; Didžiokas, Rimantas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Improvement of mechanical characteristics of a cutting edge of the blade instrument by means of electromechanical processing Autore: Bagmutov, V.P.; Parshev, S. N.; Polozenko, N. Y. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: The strain state of mechanically heterogeneous welded joint with the real square weld subjected to tension at plane deformation Autore: Bražėnas, Algis; Vaičiulis, D. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Wear of Gadfield steel-base sintered composite at current collection sliding Autore: Fadin, V.; Aleutdinova, M.; Belyaev, S.; Tarasov, S. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Strength evaluation of the steam distribution device in case of fuel channel rupture Autore: Karalevičius, R.; Dundulis, Gintautas; Rimkevičius, Sigis; Babilas, E. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Internal combustion engine valve gear cam wear and its influence on valve gear and engine efficiency Autore: Vasilyev, A.; Deynichenko, E.; Popov, D. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Creation and investigation of membrane actuator for nanopositioning using laser micro-machining Autore: Lendraitis, Vitas; Snitka, V.; Barauskas, Rimantas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Effect of fluor-oligomer on tribological properties of friction couples under varying loads Autore: Padgurskas, Juozas; Skirka, Š. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Numerical modeling of suspension cable kinematic displacements Autore: Juozapaitis, A.; Norkus, Arnoldas; Grigorjeva, Tatjana Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Analysis of bending processes of sheet metal parts and improving them with new investments - a Finnish case study Autore: Ollikainen, Mikael; Varis, Juha Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Motion of a part on a horizontally vibrating plane Autore: Bakšys, Bronius; Ramanauskytė, Kristina Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Experimental investigation of low-velocity impact on woven glass-fibre-reinforced plastics composites Autore: Keršienė, Neringa; Žiliukas, Antanas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Environment protection problems in the foundry industry – integrated evaluation Autore: Holtzer, M. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Comparison of global and local damage in reinforced concrete columns specimens Autore: Kliukas, R.; Kačanauskas, R. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Study of hydroforming by implementing necking criterion in fem code Autore: Gylienė, V.; Ostaševičius, Vytautas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Laws of deformation processes and fracture of plastic steel from the point of view of dynamic overloading Autore: Chausov, M. G.; Pylypenko, A.P. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Modeling and realization of manufacturing logistics network Autore: Anužienė, Leta; Bargelis, Algirdas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Strength anisotropy of railway wheels under contact load Autore: Vasauskas, Vytautas; Bazaras, Žilvinas; Čapas, Vytautas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Dynamic synthesis of the recoil imitation system of weapons Autore: Fedaravičius, Algimantas; Ragulskis, Minvydas; Sližys, E. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Influence of multilayer beams cross-section shape on stiffness under bending Autore: Bareišis, Jonas; Kleiza, V. Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: On direct and stepped optimization problems of flexural steel frame and their numerical realization considering strength and stiffness conditions Autore: Karkauskas, R.; Norkus, Arnoldas Pubblicato: 2005
	Mechanika, Mechanika Volumes 2005: Quality of synthetic cast iron manufactured in plasma-induction furnace Autore: Łybacki, Wojciech Pubblicato: 2005