Alla pagina principale della DMG-Lib
Home  · Mappa del sito  · Contatta  ·

Ricerca avanzata   Ricerca di un meccanismo

Mechanika: Mechanika Volumes 2007


Full-text is not available at the moment

Informazioni generali

Autore Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas; Jasevičius, R.; Kačianauskas, R.; Vadluga, V.; Dagilis, Vytautas; Vaitkus, Liutauras; Balčius, Algimantas; Kirejchick, D.; Džiugys, A.; Navakas, R.; Jankauskas, Vytenis; Kreivaitis, Raimondas; Šešok, D.; Belevičius, Rimantas; Dulinskas, E.; Zabulionis, Darius; Paulauskas, Lionginas; Vaičiulis, D.; Bražėnas, A.; Kumar, M. Senthil; Vijayarangan, S.; Lohtander, Mika; Lanz, Minna; Varis, Juha; Ollikainen, Mikael; Baron, A.; Bakhracheva, J.; Osipenko, A.; Kuprys, T.; Janutėnienė, Jolanta; Didžiokas, Rimantas; Fatmi, Louendi; Rouili, A.; Hamlaoui, Nacira; Tătar, Olimpiu; Mândru, Dan; Ardelean, Ioan; Ambroza, Petras; Kavaliauskienė, Lina; Chodočinskas, Sangau; Židonis., Ipolitas; Balevičius, Robertas; Markauskas, D.; Dudkina, N. G.; Zakharov, I. N.; Milašienė, Daiva; Židonis, Ipolitas; Bakšys, Bronius; Baskutienė, J.; Loose, H.; Kibirkštis, Edmundas; Lebedys, Alis; Dabkevičius, Arturas; Maik, V.; Kabelkaitė, Asta; Havenko, S.; Atkočiūnas, Juozas; Rimkus, Liudvikas; Skaržauskas, Valentinas; Jarmolajeva, E.; Krenevičius, A.; Leonavičius, M.; Petraitis, G.; Gutauskas, M.; Stonkus, R.; Grybenas, A.; ...
Pubblicato  Kaunas University of Technology, Kaunas, 2007
edizione  
Volume  
ISBN
Collections
Altre pubblicazioni
2000 ed oltre
Superordinate work
 
no fulltext found Mechanika
Autore: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Pubblicato: 1995-
Parts
 
thumbnail of29800009 Mechanika, Mechanika Volumes 2007: Hydrogen influence on zirconium alloy Zr-0.5Nb mechanical characteristics at ambient and elevated temperatures
Autore: Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas
Pubblicato: 2007
thumbnail of29848009 Mechanika, Mechanika Volumes 2007: Modelling deformable boundary by spherical particle for normal contact
Autore: Jasevičius, R.; Kačianauskas, R.
Pubblicato: 2007
thumbnail of29857009 Mechanika, Mechanika Volumes 2007: Investigation of the single-spring lattice model in simulation of 2D solid problems by dem
Autore: Vadluga, V.; Kačianauskas, R.
Pubblicato: 2007
thumbnail of29877009 Mechanika, Mechanika Volumes 2007: Slider-link driven compressor (III). Optimization
Autore: Dagilis, Vytautas; Vaitkus, Liutauras; Balčius, Algimantas; Kirejchick, D.
Pubblicato: 2007
thumbnail of29887009 Mechanika, Mechanika Volumes 2007: The role of friction on size segregation of granular material
Autore: Džiugys, A.; Navakas, R.
Pubblicato: 2007
thumbnail of29900009 Mechanika, Mechanika Volumes 2007: Study of wear prediction by applying surface microgeometric parameters
Autore: Jankauskas, Vytenis; Kreivaitis, Raimondas
Pubblicato: 2007
thumbnail of29906009 Mechanika, Mechanika Volumes 2007: Use of genetic algorithms in topology optimization of truss structures
Autore: Šešok, D.; Belevičius, Rimantas
Pubblicato: 2007
thumbnail of29908009 Mechanika, Mechanika Volumes 2007: Analysis of equivalent substitution of rectangular stress block for nonlinear stress diagram
Autore: Dulinskas, E.; Zabulionis, Darius
Pubblicato: 2007
thumbnail of29919009 Mechanika, Mechanika Volumes 2007: System of automated packaging machines when closing a package with metal clips
Autore: Paulauskas, Lionginas
Pubblicato: 2007
thumbnail of29920009 Mechanika, Mechanika Volumes 2007: Stress strain state of mechanically heterogeneous welded joint with mild square butt weld subjected to elastic pure bending
Autore: Vaičiulis, D.; Bražėnas, A.
Pubblicato: 2007
thumbnail of29929009 Mechanika, Mechanika Volumes 2007: Analytical and experimental studies on active suspension system of light passenger vehicle to improve ride comfort
Autore: Kumar, M. Senthil; Vijayarangan, S.
Pubblicato: 2007
thumbnail of29936009 Mechanika, Mechanika Volumes 2007: Breaking down the manufacturing process of sheet metal products into features
Autore: Lohtander, Mika; Lanz, Minna; Varis, Juha; Ollikainen, Mikael
Pubblicato: 2007
thumbnail of29946009 Mechanika, Mechanika Volumes 2007: Fracture toughness estimation by means of indentation test
Autore: Baron, A.; Bakhracheva, J.; Osipenko, A.
Pubblicato: 2007
thumbnail of29973009 Mechanika, Mechanika Volumes 2007: Strength of copper wire connections welded by ultrasonic
Autore: Kuprys, T.; Janutėnienė, Jolanta; Didžiokas, Rimantas
Pubblicato: 2007
thumbnail of29986009 Mechanika, Mechanika Volumes 2007: Cyclic loading effect on the mechanical behaviour and morphology of the high density polyethylene
Autore: Fatmi, Louendi; Rouili, A.; Hamlaoui, Nacira
Pubblicato: 2007
thumbnail of29990009 Mechanika, Mechanika Volumes 2007: Development of mobile minirobots for in pipe inspection tasks
Autore: Tătar, Olimpiu; Mândru, Dan; Ardelean, Ioan
Pubblicato: 2007
thumbnail of29996009 Mechanika, Mechanika Volumes 2007: Endurance of turning tools subjected to overlay welding
Autore: Ambroza, Petras; Kavaliauskienė, Lina; Chodočinskas, Sangau
Pubblicato: 2007
thumbnail of29997009 Mechanika, Mechanika Volumes 2007: Theoretical background of automated packaging machines when closing a package with metal clips
Autore: Paulauskas, Lionginas
Pubblicato: 2007
thumbnail of30001009 Mechanika, Mechanika Volumes 2007: A simple-to-integrate formula of stress as a function of strain in concrete and its description procedure
Autore: Židonis., Ipolitas
Pubblicato: 2007
thumbnail of30013009 Mechanika, Mechanika Volumes 2007: Theoretical background when closing a package with metal clips
Autore: Paulauskas, Lionginas
Pubblicato: 2007
thumbnail of30015009 Mechanika, Mechanika Volumes 2007: Numerical stress analysis of granular material
Autore: Balevičius, Robertas; Markauskas, D.
Pubblicato: 2007
thumbnail of30020009 Mechanika, Mechanika Volumes 2007: Micrononhomogeneous strain of the “white layer” produced by electromechanical treatment of a carbon steels
Autore: Dudkina, N. G.; Zakharov, I. N.
Pubblicato: 2007
thumbnail of30023009 Mechanika, Mechanika Volumes 2007: Effect of environment temperature on fatigue properties of laminated leather
Autore: Milašienė, Daiva
Pubblicato: 2007
thumbnail of30043009 Mechanika, Mechanika Volumes 2007: Alternative method for the calculation of stress-strain state parameters in normal sections of structural members
Autore: Židonis, Ipolitas
Pubblicato: 2007
thumbnail of30050009 Mechanika, Mechanika Volumes 2007: Numerical simulation of parts alignment under kinematical excitation
Autore: Bakšys, Bronius; Baskutienė, J.
Pubblicato: 2007
thumbnail of30057009 Mechanika, Mechanika Volumes 2007: Autonomous mobile robots for outdoor tasks
Autore: Loose, H.
Pubblicato: 2007
thumbnail of30061009 Mechanika, Mechanika Volumes 2007: Experimental study of polystyrene packaging compression resistance
Autore: Kibirkštis, Edmundas; Lebedys, Alis; Dabkevičius, Arturas; Maik, V.
Pubblicato: 2007
thumbnail of30067009 Mechanika, Mechanika Volumes 2007: Experimental study of paperboard package resistance to compression
Autore: Kibirkštis, Edmundas; Lebedys, Alis; Kabelkaitė, Asta; Havenko, S.
Pubblicato: 2007
thumbnail of30095009 Mechanika, Mechanika Volumes 2007: Optimal shakedown design of plates
Autore: Atkočiūnas, Juozas; Rimkus, Liudvikas; Skaržauskas, Valentinas; Jarmolajeva, E.
Pubblicato: 2007
thumbnail of30103009 Mechanika, Mechanika Volumes 2007: Strength of differently cooled cast iron subjected to cyclic loading
Autore: Krenevičius, A.; Leonavičius, M.; Petraitis, G.; Gutauskas, M.; Stonkus, R.
Pubblicato: 2007
thumbnail of30106009 Mechanika, Mechanika Volumes 2007: Effect of test temperature and load ratio on hydride cracking rate of Zr-2.5Nb alloy
Autore: Grybenas, A.; Makarevicius, V.; Dundulis, Gintautas
Pubblicato: 2007
thumbnail of30145009 Mechanika, Mechanika Volumes 2007: Study of the damage by acoustic emission of two laminate composites subjected to various levels of loading in three points bending
Autore: Kharoubi, Mounir; Fatmi, Louendi; Berbaoui, Rachid; Bemedakhene, Salim; Mahi, Abderrahim El
Pubblicato: 2007
thumbnail of30160009 Mechanika, Mechanika Volumes 2007: Analysis of energy dissipation of shock-absorber during random excitation
Autore: Liesionis, Vaidas; Markšaitis, Donatas; Daniulaitis, Vytautas
Pubblicato: 2007
thumbnail of30167009 Mechanika, Mechanika Volumes 2007: Hydrogen influence on fracture mechanics characteristics of zirconium alloy Zr-2.5 Nb at ambient and elevated temperatures
Autore: Daunys, Mykolas; Dundulis, Romualdas; Krasauskas, Povilas
Pubblicato: 2007
thumbnail of30202009 Mechanika, Mechanika Volumes 2007: Modelling of the Zr-2.5Nb alloy properties with hydrides
Autore: Dundulis, Gintautas; Karalevičius, R.; Janulionis, R.; Grybenas, A.
Pubblicato: 2007
thumbnail of30209009 Mechanika, Mechanika Volumes 2007: Transient characterisation and analysis of shape memory alloy wire bundles for the actuation of finger joints in prosthesis design
Autore: O’Toole, Kevin T.; McGrath, Mark M.; Hatchett, David W.
Pubblicato: 2007
thumbnail of30210009 Mechanika, Mechanika Volumes 2007: Tolerance design of multistage radial flow submersible pumps
Autore: Ragu, K.; Mohanram, P. V.
Pubblicato: 2007
thumbnail of30223009 Mechanika, Mechanika Volumes 2007: Surface finish quality characterisation of machined workpieces using fractal analysis
Autore: Alabi, B.; Salau, T.A.O.; Oke, S. A.
Pubblicato: 2007
thumbnail of30225009 Mechanika, Mechanika Volumes 2007: Investigation of radial misalignment influence on dynamics of precise rotor system
Autore: Spruogis, B.; Turla, Vytautas; Jakštas, Arunas
Pubblicato: 2007
thumbnail of30230009 Mechanika, Mechanika Volumes 2007: The arrangement scheme and its influence on vibration process of the vehicle piston engine
Autore: Vasilyev, A.; Dolgov, K.
Pubblicato: 2007
thumbnail of30235009 Mechanika, Mechanika Volumes 2007: Nonlinear programming and optimal shakedown design of frames
Autore: Atkočiūnas, Juozas; Merkevičiūtė, Dovile; Venskus, A.; Skaržauskas, Valentinas
Pubblicato: 2007
thumbnail of30237009 Mechanika, Mechanika Volumes 2007: Features of hardening of the case parts made of aluminium alloys
Autore: Matlin, M.; Lebsky, S.; Mozgunova, A.; Frolova, A.
Pubblicato: 2007
thumbnail of30245009 Mechanika, Mechanika Volumes 2007: Influence of surface hardening on low cycle tension-compression and bending durability in stress concentration zones
Autore: Daunys, Mykolas; Sabaliauskas, Arturas
Pubblicato: 2007
thumbnail of30251009 Mechanika, Mechanika Volumes 2007: Numerical modelling of creep functions of laminated composites
Autore: Zabulionis, Darius; Gailius, Albinas
Pubblicato: 2007
thumbnail of30255009 Mechanika, Mechanika Volumes 2007: Magnetic fluid based squeeze film between porous elliptical plates
Autore: Patel, Himanshu C.
Pubblicato: 2007
thumbnail of30266009 Mechanika, Mechanika Volumes 2007: Analysis the interaction of two cylindrical surfaces under shock impact load
Autore: Doroševas, Viktoras; Volkovas, Vitalijus
Pubblicato: 2007
thumbnail of30273009 Mechanika, Mechanika Volumes 2007: Insertion simulation cylindrical parts under kinematical excitation of mobile based part
Autore: Bakšys, Bronius; Kilikevičius, Sigitas
Pubblicato: 2007
thumbnail of30274009 Mechanika, Mechanika Volumes 2007: Wear behaviour of CBN tool when turning hardened AISI D3 steel
Autore: Bouchelaghem, H.; Yallese, M.A.; Amirat, A.; Belhadi., S.
Pubblicato: 2007
thumbnail of30293009 Mechanika, Mechanika Volumes 2007: Optimization of the vibroisolation systems of crane cabin using genetic algorithm
Autore: Kaczmarek, K.; Nowak, Andrzej
Pubblicato: 2007
thumbnail of30304009 Mechanika, Mechanika Volumes 2007: The effect of nitriding on fatigue strength of structural alloys
Autore: Terent’ev, V.F.; Мichugina, М.S.; Kolmakov, A.G.; Kvedaras, Valdas; Čiuplys, Vytautas; Čiuplys, Antanas; Vilys, Jonas
Pubblicato: 2007
thumbnail of30306009 Mechanika, Mechanika Volumes 2007: Investigation of stress and strain state in concentration zones under low cycle loading
Autore: Daunys, Mykolas; Norkuvienė, Deimante
Pubblicato: 2007
thumbnail of30310009 Mechanika, Mechanika Volumes 2007: Investigation of mechanical strength of adhesive joints of packages made from flock printing materials
Autore: Kibirkstis, Edmundas; Mizyuk, O.
Pubblicato: 2007
thumbnail of30324009 Mechanika, Mechanika Volumes 2007: Evaluation of friction due to deformed behaviour of rail in the electromagnetic railgun: numerical investigation
Autore: Tumonis, Liudas; Kačianauskas, R.; Kačeniauskas, A.
Pubblicato: 2007
thumbnail of30334009 Mechanika, Mechanika Volumes 2007: Nanopositioning – methods and means
Autore: Lendraitis, Vitas; Mizarienė, V.; Seniūnas, Gediminas
Pubblicato: 2007
thumbnail of30346009 Mechanika, Mechanika Volumes 2007: Stress distribution in multilayer structural element subjected to skew bending
Autore: Bareišis, Jonas; Daniškevičiūtė, A.; Kleiza, V.
Pubblicato: 2007
thumbnail of30359009 Mechanika, Mechanika Volumes 2007: Slider-link driven compressor (II). Simulation results
Autore: Dagilis, Vytautas; Vaitkus, Liutauras; Kirejchick, D.
Pubblicato: 2007
thumbnail of30362009 Mechanika, Mechanika Volumes 2007: Study of metal structure welded on the titanium malleable alloy
Autore: Vishniakas, Ivanas
Pubblicato: 2007
thumbnail of30363009 Mechanika, Mechanika Volumes 2007: Knowledge – based method for gate and cold runner definition in injection mold design
Autore: Rutkauskas, Žydrūnas; Bargelis, Algirdas
Pubblicato: 2007
thumbnail of30364009 Mechanika, Mechanika Volumes 2007: Decision support system framework for agile manufacturing of mechanical products
Autore: Anužienė, Leta; Bargelis, Algirdas
Pubblicato: 2007
thumbnail of30385009 Mechanika, Mechanika Volumes 2007: Modified genetic algorithm for optimal design of truss structures
Autore: Šešok, D.; Belevičius, Rimantas
Pubblicato: 2007
thumbnail of30386009 Mechanika, Mechanika Volumes 2007: Material properties identification. Comparison of two techniques
Autore: Ragauskas, P.; Skukis, E.
Pubblicato: 2007
thumbnail of30395009 Mechanika, Mechanika Volumes 2007: A method for impact strength estimation
Autore: Baron, A.; Bakhracheva, J.
Pubblicato: 2007
Linked items
Documents: Mechanika
Hydrogen influence on zirconium alloy Zr-0.5Nb mechanical characteristics at ambient and elevated temperatures
Modelling deformable boundary by spherical particle for normal contact
Investigation of the single-spring lattice model in simulation of 2D solid problems by dem
Slider-link driven compressor (III). Optimization
The role of friction on size segregation of granular material
Study of wear prediction by applying surface microgeometric parameters
Use of genetic algorithms in topology optimization of truss structures
Analysis of equivalent substitution of rectangular stress block for nonlinear stress diagram
System of automated packaging machines when closing a package with metal clips
Stress strain state of mechanically heterogeneous welded joint with mild square butt weld subjected to elastic pure bending
Analytical and experimental studies on active suspension system of light passenger vehicle to improve ride comfort
Breaking down the manufacturing process of sheet metal products into features
Fracture toughness estimation by means of indentation test
Strength of copper wire connections welded by ultrasonic
Cyclic loading effect on the mechanical behaviour and morphology of the high density polyethylene
Development of mobile minirobots for in pipe inspection tasks
Endurance of turning tools subjected to overlay welding
Theoretical background of automated packaging machines when closing a package with metal clips
A simple-to-integrate formula of stress as a function of strain in concrete and its description procedure
Theoretical background when closing a package with metal clips
Numerical stress analysis of granular material
Micrononhomogeneous strain of the “white layer” produced by electromechanical treatment of a carbon steels
Effect of environment temperature on fatigue properties of laminated leather
Alternative method for the calculation of stress-strain state parameters in normal sections of structural members
Numerical simulation of parts alignment under kinematical excitation
Autonomous mobile robots for outdoor tasks
Experimental study of polystyrene packaging compression resistance
Experimental study of paperboard package resistance to compression
Optimal shakedown design of plates
Strength of differently cooled cast iron subjected to cyclic loading
Effect of test temperature and load ratio on hydride cracking rate of Zr-2.5Nb alloy
Study of the damage by acoustic emission of two laminate composites subjected to various levels of loading in three points bending
Analysis of energy dissipation of shock-absorber during random excitation
Hydrogen influence on fracture mechanics characteristics of zirconium alloy Zr-2.5 Nb at ambient and elevated temperatures
Modelling of the Zr-2.5Nb alloy properties with hydrides
Transient characterisation and analysis of shape memory alloy wire bundles for the actuation of finger joints in prosthesis design
Tolerance design of multistage radial flow submersible pumps
Surface finish quality characterisation of machined workpieces using fractal analysis
Investigation of radial misalignment influence on dynamics of precise rotor system
The arrangement scheme and its influence on vibration process of the vehicle piston engine
Nonlinear programming and optimal shakedown design of frames
Features of hardening of the case parts made of aluminium alloys
Influence of surface hardening on low cycle tension-compression and bending durability in stress concentration zones
Numerical modelling of creep functions of laminated composites
Magnetic fluid based squeeze film between porous elliptical plates
Analysis the interaction of two cylindrical surfaces under shock impact load
Insertion simulation cylindrical parts under kinematical excitation of mobile based part
Wear behaviour of CBN tool when turning hardened AISI D3 steel
Optimization of the vibroisolation systems of crane cabin using genetic algorithm
The effect of nitriding on fatigue strength of structural alloys
Investigation of stress and strain state in concentration zones under low cycle loading
Investigation of mechanical strength of adhesive joints of packages made from flock printing materials
Evaluation of friction due to deformed behaviour of rail in the electromagnetic railgun: numerical investigation
Nanopositioning – methods and means
Stress distribution in multilayer structural element subjected to skew bending
Slider-link driven compressor (II). Simulation results
Study of metal structure welded on the titanium malleable alloy
Knowledge – based method for gate and cold runner definition in injection mold design
Decision support system framework for agile manufacturing of mechanical products
Modified genetic algorithm for optimal design of truss structures
Material properties identification. Comparison of two techniques
A method for impact strength estimation
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?docum=29372009
Data provider
ITUIlmenau TU  http://www.tu-ilmenau.de
Administrative information
Time of publication 2007

×