| |
|
Mechanika
Autor: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Erschienen: 1995-
|
|
| |
|
Mechanika, Mechanika Volumes 2008: 3-D modeling of nanostructures evolution in lateral etching processes
Autor: Navickas, Romualdas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: An approach to pneumatic cylinder on-line conditions monitoring
Autor: Nakutis, Žilvinas; Kaškonas, Paulius
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Analysis of compression zone parameters of cross-section in flexural reinforced concrete members according to EC2 and STR 2.05.05
Autor: Zabulionis, Darius; Dulinskas, E.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Analysis of parametric excited vibrations of drive shafts caused by induction machines
Autor: Hantel, Peter; Bogdevičius, Marius; Spruogis, B.; Turla, Vytautas; Jakštas, Arunas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Antiwear properties of lard methyl esters and rapeseed oil with commercial ashless additives
Autor: Padgurskas, Juozas; Kreivaitis, Raimondas; Jankauskas, Vytenis; Janulis, Prutenis; Makarevičienė, Violeta; Asadauskas, S.; Miknius, Linas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Application of photogrammetric method for height measurement instrumentation
Autor: Giniotis, Vytautas; Petroškevičius, Petras; Skeivalas, Jonas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Applications of high frequency vibrations for surface milling
Autor: Graževičiūtė, Jurgita; Skiedraitė, Inga; Jūrėnas, Vytautas; Bubulis, Algimantas; Ostaševičius, Vytautas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Aspects concerning modeling of self-reconfigurable parallel robots
Autor: Brisan, Cornel; Rusu, Calin
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Automatic control of longitudinal form accuracy of a shaft at grinding
Autor: Marcinkevičius, Andrius H.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Circular scale eccentricity analysis
Autor: Bručas, D.; Giniotis, Vytautas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Compressive strength of flock-coated packages
Autor: Kibirkštis, Edmundas; Mizyuk, O.; Havenko, S.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Control of the stability circular knitting process with passive yarn feeding
Autor: Čiukas, Ricardas; Sadauskas, D.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Cracking behavior of electrodeposited nanocrystalline tungsten-cobalt and tungsten-iron coatings
Autor: Vasauskas, Vytautas; Padgurskas, Juozas; Rukuiža, Raimundas; Cesiulis, Henrikas; Celis, Jean-Pierre; Milčius, D.; Prosyčevas, Igoris
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Creation and investigation of nanopositioning systems
Autor: Limanauskas, Leopoldas; Nemčiauskas, Kestutis; Lendraitis, Vitas; Mizarienė, V.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic
Autor: Fnides, B.; Aouici, Hamdi; Yallese, M. A.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Deformation characteristic research of albumen belkozin membrane
Autor: Paulauskas, Lionginas; Kairaitis, R.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Destruction of chains in magnetorheological fluids by high frequency oscillation
Autor: Bansevičius, Ramutis; Zhurauski, M.; Dragašius, Egidijus; Chodočinskas, Sangau
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Displacement of the body on the oscillatory plane
Autor: Bakšys, Bronius; Kinzhebayeva, Dinar
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Effect of elevated temperature and welding on low cycle fatigue strength of titanium alloys
Autor: Medekshas, H.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Experimental analysis of transformation plasticity and stress relaxation of carbon spring steel during tempering
Autor: Janutienė, R. Kandrotaitė; Žvinys, J.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Experimental investigation of cylindrical parts robotic vibratory insertion
Autor: Bakšys, Bronius; Kilikevičius, Sigitas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Experimental research of rotor axis revolution orbit in rotor systems with adaptive and sleeve sliding-friction bearings
Autor: Vekteris, Vladas; Čereška, Audrius; Jurevičius, Mindaugas; Striška, Vytautas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Facility for catalysts testing, research of CuO / γ – Al 2 O 3 coatings
Autor: Babilius, Arturas; Babilius, K.; Melkūnas, Regiman; Buinevičius, Kestutis
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Fatigue life prediction for threaded joint
Autor: Krenevičius, A.; Leonavičius, M.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Flash welding of nonalloyed welding wire steel
Autor: Hämäläinen, A-M.; Salo, Janne; Martikainen, Jukka
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Forced vibrations of two plates in fluid and limit eigenmodes
Autor: Kargaudas, Vytautas; Žmuida, M.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Fractal dynamics of a bouncing ball on accelerating lift tabletop with both constrained to vertical motion
Autor: Alabi, B.; Salau, T.A.O.; Oke, S. A.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Friction stir welding of aluminium alloys and damage tolerance of integral monolithic structures
Autor: Richter-Trummer, Valentin; Tavares, Sergio M. O.; Moreira, P. M. G. P.; Castro, P. M. S. T. de
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: General deformation flow theory
Autor: Zilinskaite, Ausra; Ziliukas, Antanas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Global optimization of grillages using genetic algorithms
Autor: Belevičius, Rimantas; Šešok, D.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Hard turning of hot work steel AISI H11: Evaluation of cutting pressures, resulting force and temperature
Autor: Fnides, B.; Yallese, M. A.; Aouici, H.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Hexapod leg control algorithm in fault conditions
Autor: Stoian, V.; Niţulescu, M.; Pana, Cristina
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: IDEF0 modelling technique to estimate and increase the process capability at the early product design stage
Autor: Bargelis, Algirdas; Stasiskis, Andrius
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Impact of laser and other high technologies on manufacturing efficiency in Lithuanian and Finnish sheet metalworking industry
Autor: Rimašauskas, Marius; Ollikainen, Mikael; Bargelis, Algirdas; Varis, Juha
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Impact of product modular design on agile manufacturing
Autor: Kässi, Tuomo; Leisti, Simo; Puheloinen, Tuomas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Incremental strategy for damage detection in structures
Autor: Asma, F.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Influence of chemical composition and structure on the properties of overlay welded structural steel
Autor: Ambroza, Petras; Pilkaitė, Tilma; Chodočinskas, Sangau J.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Influence of high temperature heat treatment on creep properties of high speed steel
Autor: Žvinys, J.; Janutienė, R. Kandrotaitė
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Influence of properties of large pipes on the reliability of pipelines
Autor: Abdelbaki, N.; Bouali, E.; Gaceb, M.; Bouzid, R.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Investigation of rail metal of Kaunas fortress fortification narrow – gauge railway
Autor: Žaldarys, G.; Chodočinskas, Sangau J.; Štuopys, Arminas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Investigation of tension of flock printing materials
Autor: Mizyuk, O.; Kibirkštis, Edmundas; Petraitiene, Stase
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Investigation of three-dimensional granular stresses in pyramidal container after filling
Autor: Balevičius, Robertas; Kačianauskas, R.; Vadluga, V.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Knowledge based reverse engineering tool for near net shape axisymmetric forging die design
Autor: Yilmaz, Necip Fazil; Eyercioglu, Omer
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Load distribution in the thread of body
Autor: Krenevičius, A.; Leonavičius, M.; Selivonec, J.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Low cycle fatigue of materials in nuclear industry
Autor: Daunys, Mykolas; Bazaras, Zilvinas; Timofeev, B.T.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Magnetic fluid based squeeze film between curved rough circular plates
Autor: Deheri, G. M.; Abhangi, Nikhilkumar D.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Mass conservation issues of moving interface flows modelled by the interface capturing approach
Autor: Kačeniauskas, A.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Mathematical modeling of deep drawing force with double reduction of wall thickness
Autor: Karabegović, I.; Husak, Ermin
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: MATLAB implementation in direct probability design of optimal steel trusses
Autor: Jankovski, V.; Atkočiūnas, Juozas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Mechanical properties of smart fluids under combined electrical and magnetic fields
Autor: Zhurauski, M. A.; Dragašius, Egidijus; Korobko, E. V.; Novikova, Z. A.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Modeling very early age concrete under uniaxial short-time and sustained loading
Autor: Štemberk, P.; Kalafutova, P.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Modelling and control aspects of specific mobile robot
Autor: Niţulescu, M.; Stoian, V.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Modelling and investigation of the silicon membrane actuator for nanopositioning
Autor: Lendraitis, Vitas; Snitka, V.; Mizarienė, V.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Modelling, design and control of 3DOF medical parallel robot
Autor: Stan, Sergiu-D.; Bălan, Radu; Mătieş, Vistrian
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Multiresolution derives analysis of module mechatronical systems
Autor: Nowak, Andrzej; Woźniak, Marcin
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Nonlinear random vibrations of a sandwich beam adaptive to electrorheological materials
Autor: Vaičaitis, Rimas; Liu, S.; Jotautienė, Egle
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Numerical and experimental research of the influence of hydrogen on the fracture toughness of zirconium – 2.5% niobium alloy
Autor: Janulionis, R.; Daunys, Mykolas; Dundulis, Gintautas; Grybėnas, A.; Karalevičius, R.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Numerical simulation of tooth mobility using nonlinear model of the periodontal ligament
Autor: Danielytė, Jovita; Gaidys, Rimvydas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: On momentum transfer in a falling turbulent liquid film
Autor: Šinkūnas, Stasys; Kiela, Algimantas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: On passive displacement-dependent damping for cab suspension
Autor: Kroneld, P.; Liedes, Toni; Ruotsalainen, P.; Nevala, Kalervo
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Plate buckling under complex loading
Autor: Žiliukas, Antanas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Prediction of the strength and fracture of the fuel storage tank
Autor: Leišis, Vitalis; Sudintas, A.; Žiliukas, Antanas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Product configurator for product data management system: design of internal structure
Autor: Burneika, L.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Reliability of a timber structure exposed to fire: estimation using fragility function
Autor: Vaidogas, E. R.; Juocevičius, Virmantas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Research of abrasive erosion wear for Fe-C-Cr-B hard layers
Autor: Jankauskas, Vytenis; Kreivaitis, Raimondas; Kulu, Priit; Antonov, Maksim; Milčius, D.; Varnauskas., V.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Research of complex rotary systems vibrocondition based on analysis of dynamical processes and spectrum of vibrations
Autor: Juzėnas, E.; Jonušas, Remigijus; Juzėnas, Kazimieras
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Research of force drives of the production gear hobbing machine with CNC
Autor: Gichan, Vladimir; Slivinskas, Kastytis; Augustaitis, Vytautas K.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Research of mine imitator interaction with nondeformable surface
Autor: Fedaravičius, Algimantas; Šaulys, Povilas; Griškevičius, Paulius
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Research of strengthening plough parts by welding
Autor: Jankauskas, Vytenis; Kreivaitis, Raimondas; Stonkus, D.; Andriušis, A.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Simulation of solid specimen for compression tests by discrete particles
Autor: Maknickas, A.; Kačianauskas, R.; Kutas, R.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Special features of breaking the welded connections of the ferritic steels
Autor: Vishniakas, Ivanas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Spheroid graphite cast iron specimens with defects cracking investigation
Autor: Leonavičius, M.; Bobyliov, K.; Krenevičius, A.; Stupak, S.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Statistical evaluation of low cycle durability for alloyed structural steels weld metals at room and elevated temperature
Autor: Daunys, Mykolas; Stulpinaitė, A.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: The influence of seat pad stiffness and damping on the intervertebral forces in the junction of thoracic and lumbar spinal curves
Autor: Rukuiža, Egidijus; Eidukynas, Valdas; Dulevičius, Jonas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: The rotating system vibration and diagnostics
Autor: Vasylius, M.; Didžiokas, Rimantas; Mazeika, Pranas; Barzdaitis, Vytautas
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: The strength-related characteristics of chromium-molybdenum P5 steel dependence on postweld heat treatment parameters
Autor: Kumšlytis, Vigantas; Valiulis, A. V.; Černašėjus, O.
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: The wear of single flute gun drill and tool life tests
Autor: Sihvo, Inga; Varis, Juha
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Tractor ballasting in field work
Autor: Janulevičius, Algirdas; Giedra, Kazimieras
Erschienen: 2008
|
|
Mechanika, Mechanika Volumes 2008: Utilization of waste materials for welding and surfacing
Autor: Ambroza, Petras; Kavaliauskienė, Lina
Erschienen: 2008
|
|
Newsletter
DMG-Lib
TU Ilmenau
