para ir a la página principal de DMG-Lib
Home  · Mapa del sitio  · Contacto  ·

Búsqueda avanzada   Búsqueda de mecanismos

Mechanika: Mechanika Volumes 2010


Full-text is not available at the moment

Información general

Autor Stupak, Eugenius; Yahiaoui, Tayeb; Adjlout, L.; Imine, O.; Verners, Osvalds; Dobelis, Modris; Borisov, Andrej V.; Černiauskas, Egidijus; Keršys, Arturas; Lukoševičius, Vaidas; Sapragonas, Jonas; Shariati, M.; Sedighi, M.; Saemi, Jafar; Eipakchi, H. R.; Allahbakhsh, H. R.; Zdravecka, Eva; Suchanek, Jan; Tkacova, Jana; Trpcevska, Jarmila; Brinkienė, Kristina; Ragulskis, Kazimieras; Kibirkštis, Edmundas; Dabkevičius, Arturas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L.; Bakšys, Bronius; Baskutienė, J.; Šinkūnas, Stasys; Kiela, Algimantas; Mihai, I.; Ionescu, M.; Amarandei, D.; Jurenas, Vytautas; Bansevicius, Ramutis; Navickaite, Sigita; Radmehr, D.; Liaghat, G. H.; Felli, S.; Naderi, D.; Aluţei, A.; Tătar, Mihai Olimpiu; Cirebea, Claudiu; Vatau, Steliana; Ciupe, Vali; Moldovan, Cristian; Maniu, Inocentiu; Bručas, D.; Giniotis, Vytautas; Augustinavičius, G.; Stepanovienė, J.; Allahbakhsh, H. R.; Saemi, Jafar; Verdeş, Dan; Stan, Sergiu-D.; Bălan, Radu; Coman, Mircea; Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Barauskas, Rimantas; Šurna, R.; Židonis, Ipolitas; Vekteris, Vladas; Mokšin, Vadim; Akıncı, T.Ç.; Jankauskas, Vytenis; ...
Publicado  Kaunas University of Technology, Kaunas, 2010
Edición  
Extensión  
ISBN
Collections
Otras publicaciones
2000 y posteriores
Superordinate work
 
no fulltext found Mechanika
Autor: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Publicado: 1995-
Parts
 
thumbnail of29769009 Mechanika, Mechanika Volumes 2010: Investigation of fracture of inhomogeneous cast iron specimens
Autor: Stupak, Eugenius
Publicado: 2010
thumbnail of29770009 Mechanika, Mechanika Volumes 2010: Experimental investigation of in-line tube bundles
Autor: Yahiaoui, Tayeb; Adjlout, L.; Imine, O.
Publicado: 2010
thumbnail of29774009 Mechanika, Mechanika Volumes 2010: Shape optimization of a lightweight tetrapod-like superelement
Autor: Verners, Osvalds; Dobelis, Modris
Publicado: 2010
thumbnail of29778009 Mechanika, Mechanika Volumes 2010: Elastic analysis of multilayered thick-walled spheres under external load
Autor: Borisov, Andrej V.
Publicado: 2010
thumbnail of29789009 Mechanika, Mechanika Volumes 2010: Investigation of anti-intrusion beams in vehicle side doors
Autor: Černiauskas, Egidijus; Keršys, Arturas; Lukoševičius, Vaidas; Sapragonas, Jonas
Publicado: 2010
thumbnail of29793009 Mechanika, Mechanika Volumes 2010: Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading
Autor: Shariati, M.; Sedighi, M.; Saemi, Jafar; Eipakchi, H. R.; Allahbakhsh, H. R.
Publicado: 2010
thumbnail of29795009 Mechanika, Mechanika Volumes 2010: Investigation of wear resistance of high velocity oxy-fuel sprayed WC-Co and Cr3C2-NiCr coatings
Autor: Zdravecka, Eva; Suchanek, Jan; Tkacova, Jana; Trpcevska, Jarmila; Brinkienė, Kristina
Publicado: 2010
thumbnail of29805009 Mechanika, Mechanika Volumes 2010: Investigation of physically nonlinear behaviour of polystyrene packages and their elements
Autor: Ragulskis, Kazimieras; Kibirkštis, Edmundas; Dabkevičius, Arturas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L.
Publicado: 2010
thumbnail of29809009 Mechanika, Mechanika Volumes 2010: Simulation of the part-to-part vibratory alignment under impact mode displacement
Autor: Bakšys, Bronius; Baskutienė, J.
Publicado: 2010
thumbnail of29818009 Mechanika, Mechanika Volumes 2010: Effect of liquid physical properties variability on film thickness
Autor: Šinkūnas, Stasys; Kiela, Algimantas
Publicado: 2010
thumbnail of29821009 Mechanika, Mechanika Volumes 2010: Determination of indicial response for an adaptive hydraulic system by means of the trapeze method
Autor: Mihai, I.; Ionescu, M.; Amarandei, D.
Publicado: 2010
thumbnail of29822009 Mechanika, Mechanika Volumes 2010: Piezoelectric bimorphs for laser shutter systems: optimization of dynamic characteristics
Autor: Jurenas, Vytautas; Bansevicius, Ramutis; Navickaite, Sigita
Publicado: 2010
thumbnail of29831009 Mechanika, Mechanika Volumes 2010: Analytical solution for penetration of deformable blunt projectiles into the metallic targets
Autor: Radmehr, D.; Liaghat, G. H.; Felli, S.; Naderi, D.
Publicado: 2010
thumbnail of29835009 Mechanika, Mechanika Volumes 2010: Model and test of a modular inspection robotic system
Autor: Aluţei, A.; Tătar, Mihai Olimpiu; Cirebea, Claudiu
Publicado: 2010
thumbnail of29841009 Mechanika, Mechanika Volumes 2010: Mechanical design and system control of quadruped robot
Autor: Vatau, Steliana; Ciupe, Vali; Moldovan, Cristian; Maniu, Inocentiu
Publicado: 2010
thumbnail of29847009 Mechanika, Mechanika Volumes 2010: Calibration of the multiangular prism (polygon)
Autor: Bručas, D.; Giniotis, Vytautas; Augustinavičius, G.; Stepanovienė, J.
Publicado: 2010
thumbnail of29849009 Mechanika, Mechanika Volumes 2010: An experimental and numerical crashworthiness investigation of crash columns assembled by spot-weld
Autor: Shariati, M.; Allahbakhsh, H. R.; Saemi, Jafar
Publicado: 2010
thumbnail of29852009 Mechanika, Mechanika Volumes 2010: Study of design, kinematics and virtual control of 4 degrees of freedom parallel robot
Autor: Verdeş, Dan; Stan, Sergiu-D.; Bălan, Radu; Coman, Mircea
Publicado: 2010
thumbnail of29856009 Mechanika, Mechanika Volumes 2010: Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study
Autor: Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Barauskas, Rimantas; Šurna, R.
Publicado: 2010
thumbnail of29871009 Mechanika, Mechanika Volumes 2010: Estimation of account the flanges in the direct calculation of stress-strain state parameters at normal sections of structural members
Autor: Židonis, Ipolitas
Publicado: 2010
thumbnail of29882009 Mechanika, Mechanika Volumes 2010: The modular principle of design of adaptive film lubrication bearings
Autor: Vekteris, Vladas; Mokšin, Vadim
Publicado: 2010
thumbnail of29886009 Mechanika, Mechanika Volumes 2010: Time-frequency analysis of the current measurement by hall effect sensors for electric arc welding machine
Autor: Akıncı, T.Ç.
Publicado: 2010
thumbnail of29911009 Mechanika, Mechanika Volumes 2010: Influence of counterbody surface hardness of a friction pair “steel-steel” on tribological behaviour of zinc nanopowder in oil
Autor: Jankauskas, Vytenis; Belyaev, S.
Publicado: 2010
thumbnail of29925009 Mechanika, Mechanika Volumes 2010: Estimation of tool wear of a gun drill using the signal curve pattern of feed force
Autor: Sihvo, Inga; Varis, Juha
Publicado: 2010
thumbnail of29932009 Mechanika, Mechanika Volumes 2010: Investigation of dependences of stress strain state properties on metal sheet holding force at its forming
Autor: Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R.
Publicado: 2010
thumbnail of29940009 Mechanika, Mechanika Volumes 2010: Real-time parameter identification for highly coupled nonlinear systems using adaptive particle swarm optimization
Autor: Sahraei, B. Ranjbar; Nemati, A.; Safavi, A. A.
Publicado: 2010
thumbnail of29963009 Mechanika, Mechanika Volumes 2010: Analysis of some extreme situations in exploitation of complex rotary systems
Autor: Jonušas, Remigijus; Juzėnas, E.; Juzėnas, Kazimieras
Publicado: 2010
thumbnail of29970009 Mechanika, Mechanika Volumes 2010: Worm gears with optimized main geometrical parameters and their efficiency
Autor: Alexandru, Antal Tiberiu
Publicado: 2010
thumbnail of29975009 Mechanika, Mechanika Volumes 2010: Meshless analysis of cracked functionally graded materials under thermal shock
Autor: Nazari, M. B.; Shariati, M.; Eslami, M. R.; Hassani, B.
Publicado: 2010
thumbnail of29979009 Mechanika, Mechanika Volumes 2010: The filler wire - laser beam interaction during laser welding with low alloyed steel filler wire
Autor: Salminen, Antti
Publicado: 2010
thumbnail of29985009 Mechanika, Mechanika Volumes 2010: Theoretical considerations regarding the virtual modelling of surfaces used in topography
Autor: Teuţan, Emil; Bara, M.; Ardelean, Ioan
Publicado: 2010
thumbnail of29987009 Mechanika, Mechanika Volumes 2010: Application of GRID computing for optimization of grillages
Autor: Šešok, D.; Belevičius, Rimantas; Kačeniauskas, A.; Mockus, J.
Publicado: 2010
thumbnail of30008009 Mechanika, Mechanika Volumes 2010: Experimental characterization of material structure of piezoelectric PVDF polymer
Autor: Ostaševičius, Vytautas; Milašauskaitė, I.; Daukševičius, Rolanas; Baltrušaitis, V.; Grigaliūnas, Viktoras; Prosyčevas, Igoris
Publicado: 2010
thumbnail of30030009 Mechanika, Mechanika Volumes 2010: Logbuild - CAD/CAM system for log houses
Autor: Portjanski, Leonid; Nekrassov, Grigori; Zahharov, Roman; Ševtšenko, Eduard
Publicado: 2010
thumbnail of30033009 Mechanika, Mechanika Volumes 2010: The effect of lubricant rheology on piston skirt/cylinder contact for an internal combustion engine
Autor: Kellaci, A.; Mazouzi, R.; Khelidj, B.; Bounif, A.
Publicado: 2010
thumbnail of30058009 Mechanika, Mechanika Volumes 2010: Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends
Autor: Ghannad, Mehdi; Nejad, Mohammad Zamani
Publicado: 2010
thumbnail of30068009 Mechanika, Mechanika Volumes 2010: Effect of lubricant contamination on friction and wear in an EHL sliding contact
Autor: Sari, M. R.; Ville, Fabrice; Haiahem, A.; Flamand, Louis
Publicado: 2010
thumbnail of30071009 Mechanika, Mechanika Volumes 2010: Statistical evaluation of low cycle stress-strain curves parameters for alloyed structural steels weld metals at room and elevated temperature
Autor: Daunys, Mykolas; Stulpinaitė, A.; Šniuolis, R.
Publicado: 2010
thumbnail of30072009 Mechanika, Mechanika Volumes 2010: Structural optimization in product design process
Autor: Povilionis, Audrius; Bargelis, Algirdas
Publicado: 2010
thumbnail of30099009 Mechanika, Mechanika Volumes 2010: Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool
Autor: Aouici, Hamdi; Yallese, M.A.; Fnides, B.; Mabrouki, Tarek
Publicado: 2010
thumbnail of30100009 Mechanika, Mechanika Volumes 2010: Modeling, experimental research and critical parameter analysis of glider’s dynamic characteristics
Autor: Rugaitis, Aurimas; Juočas, K.; Volkovas, Vitalijus; Deksnys, Vytautas
Publicado: 2010
thumbnail of30105009 Mechanika, Mechanika Volumes 2010: Manipulation of a part on a vibrating plane under controlled dry friction
Autor: Bakšys, Bronius; Liutkauskienė, K.
Publicado: 2010
thumbnail of30113009 Mechanika, Mechanika Volumes 2010: Development of cavitation applications for the remediation of contaminated water
Autor: Bubulis, Algimantas; Bogorosh, A.T.; Jūrėnas, Vytautas; Voronov, S.
Publicado: 2010
thumbnail of30117009 Mechanika, Mechanika Volumes 2010: Computational analysis of the magnetorheological fluid loading unit of rowing simulator
Autor: Grigas, Vytautas; Kazlauskienė, Kristina; Šulginas, A.; Toločka, R. T.
Publicado: 2010
thumbnail of30119009 Mechanika, Mechanika Volumes 2010: Impact of manufacturing engineering efficiency to the industry advancement
Autor: Bargelis, Algirdas; Mankute, Rasa
Publicado: 2010
thumbnail of30127009 Mechanika, Mechanika Volumes 2010: Post-elastic force-displacement dependence of bent and compressed column
Autor: Kargaudas, Vytautas; Adamukaitis, Nerijus
Publicado: 2010
thumbnail of30138009 Mechanika, Mechanika Volumes 2010: Control of physical surface by detecting coordinates
Autor: Skeivalas, Jonas; Čygas, Donatas
Publicado: 2010
thumbnail of30146009 Mechanika, Mechanika Volumes 2010: Investigation on thermo-acoustical instabilities related to a confined swirling burner
Autor: Bode, Florin; Benea, R.; Hodor, Victor
Publicado: 2010
thumbnail of30147009 Mechanika, Mechanika Volumes 2010: Numerical investigation of impact behaviour of sandwich fiber reinforced plastic composites
Autor: Zeleniakienė, Daiva; Griškevičius, Paulius; Leišis, Vitalis; Milašienė, Daiva
Publicado: 2010
thumbnail of30161009 Mechanika, Mechanika Volumes 2010: Diagnostics practice of heavy duty high speed gear transmissions
Autor: Barzdaitis, Vytautas; Mazeika, Pranas
Publicado: 2010
thumbnail of30168009 Mechanika, Mechanika Volumes 2010: Simulation of normal impact of micron-sized particle with elastic-plastic contact
Autor: Jasevičius, R.; Tomas, Juergen; Kačianauskas, R.
Publicado: 2010
thumbnail of30174009 Mechanika, Mechanika Volumes 2010: The experimental research of piezoelectric actuator with two vectors of polarization direction
Autor: Lučinskis, Raimundas; Mažeika, Dalius; Hemsel, T.; Bansevičius, Ramutis
Publicado: 2010
thumbnail of30184009 Mechanika, Mechanika Volumes 2010: Effect of sensor locations on the solution of inverse Stefan problems
Autor: Nejad, A. Abbas; Maghrebi, M. J.; Tabrizi, H. Basirat
Publicado: 2010
thumbnail of30189009 Mechanika, Mechanika Volumes 2010: Numerical simulation sequence in applying to facility for sports and entertainment skiing slopes
Autor: Samofalov, Michail
Publicado: 2010
thumbnail of30207009 Mechanika, Mechanika Volumes 2010: Computation film cooling from three different holes geometries
Autor: Khorsi, Azzeddine; Azzi, Abbès
Publicado: 2010
thumbnail of30219009 Mechanika, Mechanika Volumes 2010: Numerical analysis of hydrodynamic journal bearing under transient dynamic conditions
Autor: Kumar, M. Senthil; Thyla, P. R.; Anbarasu, E.
Publicado: 2010
thumbnail of30226009 Mechanika, Mechanika Volumes 2010: Pneumatic transport of granular materials over plane using concentrated air flow
Autor: Palšauskas, Mecys; Bozys, J.; Jotautienė, Egle
Publicado: 2010
thumbnail of30236009 Mechanika, Mechanika Volumes 2010: Investigation of resistance of nuclear fuel cladding to hydride cracking
Autor: Makarevičius, V.; Grybėnas, A.; Kriūkienė, Rita
Publicado: 2010
thumbnail of30252009 Mechanika, Mechanika Volumes 2010: Effect of explosive loading on mechanical properties of concrete and reinforcing steel: towards developing a predictive model
Autor: Vaidogas, E. R.; Juocevičius, Virmantas
Publicado: 2010
thumbnail of30264009 Mechanika, Mechanika Volumes 2010: Diagnostic research of adaptive hydrodynamic segmental bearings with elastic ring in a rotor system
Autor: Vekteris, Vladas; Čereška, Audrius; Jurevičius, Mindaugas
Publicado: 2010
thumbnail of30268009 Mechanika, Mechanika Volumes 2010: Optimization of the high-speed profile plunge grinding process
Autor: Somov, Dmitrij; Bazaras, Zilvinas; Pupleviciute, A.
Publicado: 2010
thumbnail of30302009 Mechanika, Mechanika Volumes 2010: Influence of structure and mechanical properties for cyclic fracture rates of cast iron
Autor: Leonavičius, M. K.; Krenevičius, A.; Bacevičius, Jonas
Publicado: 2010
thumbnail of30308009 Mechanika, Mechanika Volumes 2010: Strength and fracture criteria application in stress concentrators areas
Autor: Žiliukas, Antanas; Surantas, Andrius; Žiogas, Giedrius
Publicado: 2010
thumbnail of30320009 Mechanika, Mechanika Volumes 2010: Classic finite elements for simulation of piezoelectric smart structures
Autor: Rahmoune, M.; Osmont, Daniel
Publicado: 2010
thumbnail of30322009 Mechanika, Mechanika Volumes 2010: The investigation of fuel consumption of the ICE with traditional and modified work cycle
Autor: Jakstas, Marijus
Publicado: 2010
thumbnail of30328009 Mechanika, Mechanika Volumes 2010: The model of bent threaded connection in three segments
Autor: Krenevičius, A.; Juchnevičius, Ž.; Leonavičius, M. K.
Publicado: 2010
thumbnail of30345009 Mechanika, Mechanika Volumes 2010: Influence of ply orientation on mode I interlaminar fracture toughness of woven carbon and glass composites
Autor: Keršienė, Neringa; Žiliukas, Antanas; Keršys, Arturas
Publicado: 2010
thumbnail of30358009 Mechanika, Mechanika Volumes 2010: Engine working modes during tractors operational period
Autor: Janulevičius, Algirdas; Juostas, Antanas; Pupinis, G.
Publicado: 2010
thumbnail of30361009 Mechanika, Mechanika Volumes 2010: Viscoplasticity coupled with nonlocalized damage for incompatibilities due to strain softening
Autor: Pirali, P.; Liaghat, Gh. H.; Ahmadi, M. T.
Publicado: 2010
thumbnail of30378009 Mechanika, Mechanika Volumes 2010: Automatic arc welding and overlaying welding of steel using waste materials powder
Autor: Ambroza, Petras; Kavaliauskienė, Lina; Pupelis, Edmundas
Publicado: 2010
thumbnail of30380009 Mechanika, Mechanika Volumes 2010: The effect of the relative location of laser beam with arc in different hybrid welding processes
Autor: Kah, Paul; Salminen, Antti; Martikainen, Jukka
Publicado: 2010
thumbnail of30388009 Mechanika, Mechanika Volumes 2010: Investigation of low cycle asymmetric torsion
Autor: Daunys, Mykolas; Česnavičius, Ramunas
Publicado: 2010
thumbnail of30392009 Mechanika, Mechanika Volumes 2010: Optimization of foam filled spot-welded column for the crashworthiness design
Autor: Shariati, M.; Saemi, Jafar; Sedighi, M.
Publicado: 2010
Linked items
Documents: Mechanika
Investigation of fracture of inhomogeneous cast iron specimens
Experimental investigation of in-line tube bundles
Shape optimization of a lightweight tetrapod-like superelement
Elastic analysis of multilayered thick-walled spheres under external load
Investigation of anti-intrusion beams in vehicle side doors
Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading
Investigation of wear resistance of high velocity oxy-fuel sprayed WC-Co and Cr3C2-NiCr coatings
Investigation of physically nonlinear behaviour of polystyrene packages and their elements
Simulation of the part-to-part vibratory alignment under impact mode displacement
Effect of liquid physical properties variability on film thickness
Determination of indicial response for an adaptive hydraulic system by means of the trapeze method
Piezoelectric bimorphs for laser shutter systems: optimization of dynamic characteristics
Analytical solution for penetration of deformable blunt projectiles into the metallic targets
Model and test of a modular inspection robotic system
Mechanical design and system control of quadruped robot
Calibration of the multiangular prism (polygon)
An experimental and numerical crashworthiness investigation of crash columns assembled by spot-weld
Study of design, kinematics and virtual control of 4 degrees of freedom parallel robot
Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study
Estimation of account the flanges in the direct calculation of stress-strain state parameters at normal sections of structural members
The modular principle of design of adaptive film lubrication bearings
Time-frequency analysis of the current measurement by hall effect sensors for electric arc welding machine
Influence of counterbody surface hardness of a friction pair “steel-steel” on tribological behaviour of zinc nanopowder in oil
Estimation of tool wear of a gun drill using the signal curve pattern of feed force
Investigation of dependences of stress strain state properties on metal sheet holding force at its forming
Real-time parameter identification for highly coupled nonlinear systems using adaptive particle swarm optimization
Analysis of some extreme situations in exploitation of complex rotary systems
Worm gears with optimized main geometrical parameters and their efficiency
Meshless analysis of cracked functionally graded materials under thermal shock
The filler wire - laser beam interaction during laser welding with low alloyed steel filler wire
Theoretical considerations regarding the virtual modelling of surfaces used in topography
Application of GRID computing for optimization of grillages
Experimental characterization of material structure of piezoelectric PVDF polymer
Logbuild - CAD/CAM system for log houses
The effect of lubricant rheology on piston skirt/cylinder contact for an internal combustion engine
Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends
Effect of lubricant contamination on friction and wear in an EHL sliding contact
Statistical evaluation of low cycle stress-strain curves parameters for alloyed structural steels weld metals at room and elevated temperature
Structural optimization in product design process
Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool
Modeling, experimental research and critical parameter analysis of glider’s dynamic characteristics
Manipulation of a part on a vibrating plane under controlled dry friction
Development of cavitation applications for the remediation of contaminated water
Computational analysis of the magnetorheological fluid loading unit of rowing simulator
Impact of manufacturing engineering efficiency to the industry advancement
Post-elastic force-displacement dependence of bent and compressed column
Control of physical surface by detecting coordinates
Investigation on thermo-acoustical instabilities related to a confined swirling burner
Numerical investigation of impact behaviour of sandwich fiber reinforced plastic composites
Diagnostics practice of heavy duty high speed gear transmissions
Simulation of normal impact of micron-sized particle with elastic-plastic contact
The experimental research of piezoelectric actuator with two vectors of polarization direction
Effect of sensor locations on the solution of inverse Stefan problems
Numerical simulation sequence in applying to facility for sports and entertainment skiing slopes
Computation film cooling from three different holes geometries
Numerical analysis of hydrodynamic journal bearing under transient dynamic conditions
Pneumatic transport of granular materials over plane using concentrated air flow
Investigation of resistance of nuclear fuel cladding to hydride cracking
Effect of explosive loading on mechanical properties of concrete and reinforcing steel: towards developing a predictive model
Diagnostic research of adaptive hydrodynamic segmental bearings with elastic ring in a rotor system
Optimization of the high-speed profile plunge grinding process
Influence of structure and mechanical properties for cyclic fracture rates of cast iron
Strength and fracture criteria application in stress concentrators areas
Classic finite elements for simulation of piezoelectric smart structures
The investigation of fuel consumption of the ICE with traditional and modified work cycle
The model of bent threaded connection in three segments
Influence of ply orientation on mode I interlaminar fracture toughness of woven carbon and glass composites
Engine working modes during tractors operational period
Viscoplasticity coupled with nonlocalized damage for incompatibilities due to strain softening
Automatic arc welding and overlaying welding of steel using waste materials powder
The effect of the relative location of laser beam with arc in different hybrid welding processes
Investigation of low cycle asymmetric torsion
Optimization of foam filled spot-welded column for the crashworthiness design
Permanent links
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?docum=29375009
Data provider
ITUIlmenau TU  http://www.tu-ilmenau.de
Administrative information
Time of publication 2010

×