Mechanika: Mechanika Volumes 2010

Full-text is not available at the moment

Informazioni generali
Autore	Stupak, Eugenius; Yahiaoui, Tayeb; Adjlout, L.; Imine, O.; Verners, Osvalds; Dobelis, Modris; Borisov, Andrej V.; Černiauskas, Egidijus; Keršys, Arturas; Lukoševičius, Vaidas; Sapragonas, Jonas; Shariati, M.; Sedighi, M.; Saemi, Jafar; Eipakchi, H. R.; Allahbakhsh, H. R.; Zdravecka, Eva; Suchanek, Jan; Tkacova, Jana; Trpcevska, Jarmila; Brinkienė, Kristina; Ragulskis, Kazimieras; Kibirkštis, Edmundas; Dabkevičius, Arturas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L.; Bakšys, Bronius; Baskutienė, J.; Šinkūnas, Stasys; Kiela, Algimantas; Mihai, I.; Ionescu, M.; Amarandei, D.; Jurenas, Vytautas; Bansevicius, Ramutis; Navickaite, Sigita; Radmehr, D.; Liaghat, G. H.; Felli, S.; Naderi, D.; Aluţei, A.; Tătar, Mihai Olimpiu; Cirebea, Claudiu; Vatau, Steliana; Ciupe, Vali; Moldovan, Cristian; Maniu, Inocentiu; Bručas, D.; Giniotis, Vytautas; Augustinavičius, G.; Stepanovienė, J.; Allahbakhsh, H. R.; Saemi, Jafar; Verdeş, Dan; Stan, Sergiu-D.; Bălan, Radu; Coman, Mircea; Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Barauskas, Rimantas; Šurna, R.; Židonis, Ipolitas; Vekteris, Vladas; Mokšin, Vadim; Akıncı, T.Ç.; Jankauskas, Vytenis; ...
Pubblicato	Kaunas University of Technology, Kaunas, 2010
edizione
Volume
ISBN

Collections

		Altre pubblicazioni
		2000 ed oltre

Superordinate work

Mechanika
Autore: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Pubblicato: 1995-

Parts

	Mechanika, Mechanika Volumes 2010: Investigation of fracture of inhomogeneous cast iron specimens Autore: Stupak, Eugenius Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Experimental investigation of in-line tube bundles Autore: Yahiaoui, Tayeb; Adjlout, L.; Imine, O. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Shape optimization of a lightweight tetrapod-like superelement Autore: Verners, Osvalds; Dobelis, Modris Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Elastic analysis of multilayered thick-walled spheres under external load Autore: Borisov, Andrej V. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation of anti-intrusion beams in vehicle side doors Autore: Černiauskas, Egidijus; Keršys, Arturas; Lukoševičius, Vaidas; Sapragonas, Jonas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Numerical and experimental investigation on ultimate strength of cracked cylindrical shells subjected to combined loading Autore: Shariati, M.; Sedighi, M.; Saemi, Jafar; Eipakchi, H. R.; Allahbakhsh, H. R. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation of wear resistance of high velocity oxy-fuel sprayed WC-Co and Cr3C2-NiCr coatings Autore: Zdravecka, Eva; Suchanek, Jan; Tkacova, Jana; Trpcevska, Jarmila; Brinkienė, Kristina Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation of physically nonlinear behaviour of polystyrene packages and their elements Autore: Ragulskis, Kazimieras; Kibirkštis, Edmundas; Dabkevičius, Arturas; Bivainis, Vaidas; Miliūnas, Valdas; Ragulskis, L. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Simulation of the part-to-part vibratory alignment under impact mode displacement Autore: Bakšys, Bronius; Baskutienė, J. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Effect of liquid physical properties variability on film thickness Autore: Šinkūnas, Stasys; Kiela, Algimantas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Determination of indicial response for an adaptive hydraulic system by means of the trapeze method Autore: Mihai, I.; Ionescu, M.; Amarandei, D. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Piezoelectric bimorphs for laser shutter systems: optimization of dynamic characteristics Autore: Jurenas, Vytautas; Bansevicius, Ramutis; Navickaite, Sigita Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Analytical solution for penetration of deformable blunt projectiles into the metallic targets Autore: Radmehr, D.; Liaghat, G. H.; Felli, S.; Naderi, D. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Model and test of a modular inspection robotic system Autore: Aluţei, A.; Tătar, Mihai Olimpiu; Cirebea, Claudiu Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Mechanical design and system control of quadruped robot Autore: Vatau, Steliana; Ciupe, Vali; Moldovan, Cristian; Maniu, Inocentiu Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Calibration of the multiangular prism (polygon) Autore: Bručas, D.; Giniotis, Vytautas; Augustinavičius, G.; Stepanovienė, J. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: An experimental and numerical crashworthiness investigation of crash columns assembled by spot-weld Autore: Shariati, M.; Allahbakhsh, H. R.; Saemi, Jafar Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Study of design, kinematics and virtual control of 4 degrees of freedom parallel robot Autore: Verdeş, Dan; Stan, Sergiu-D.; Bălan, Radu; Coman, Mircea Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study Autore: Pileičikienė, G.; Šurna, A.; Skirbutis, Gediminas; Barauskas, Rimantas; Šurna, R. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Estimation of account the flanges in the direct calculation of stress-strain state parameters at normal sections of structural members Autore: Židonis, Ipolitas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The modular principle of design of adaptive film lubrication bearings Autore: Vekteris, Vladas; Mokšin, Vadim Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Time-frequency analysis of the current measurement by hall effect sensors for electric arc welding machine Autore: Akıncı, T.Ç. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Influence of counterbody surface hardness of a friction pair “steel-steel” on tribological behaviour of zinc nanopowder in oil Autore: Jankauskas, Vytenis; Belyaev, S. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Estimation of tool wear of a gun drill using the signal curve pattern of feed force Autore: Sihvo, Inga; Varis, Juha Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation of dependences of stress strain state properties on metal sheet holding force at its forming Autore: Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Real-time parameter identification for highly coupled nonlinear systems using adaptive particle swarm optimization Autore: Sahraei, B. Ranjbar; Nemati, A.; Safavi, A. A. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Analysis of some extreme situations in exploitation of complex rotary systems Autore: Jonušas, Remigijus; Juzėnas, E.; Juzėnas, Kazimieras Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Worm gears with optimized main geometrical parameters and their efficiency Autore: Alexandru, Antal Tiberiu Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Meshless analysis of cracked functionally graded materials under thermal shock Autore: Nazari, M. B.; Shariati, M.; Eslami, M. R.; Hassani, B. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The filler wire - laser beam interaction during laser welding with low alloyed steel filler wire Autore: Salminen, Antti Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Theoretical considerations regarding the virtual modelling of surfaces used in topography Autore: Teuţan, Emil; Bara, M.; Ardelean, Ioan Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Application of GRID computing for optimization of grillages Autore: Šešok, D.; Belevičius, Rimantas; Kačeniauskas, A.; Mockus, J. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Experimental characterization of material structure of piezoelectric PVDF polymer Autore: Ostaševičius, Vytautas; Milašauskaitė, I.; Daukševičius, Rolanas; Baltrušaitis, V.; Grigaliūnas, Viktoras; Prosyčevas, Igoris Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Logbuild - CAD/CAM system for log houses Autore: Portjanski, Leonid; Nekrassov, Grigori; Zahharov, Roman; Ševtšenko, Eduard Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The effect of lubricant rheology on piston skirt/cylinder contact for an internal combustion engine Autore: Kellaci, A.; Mazouzi, R.; Khelidj, B.; Bounif, A. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends Autore: Ghannad, Mehdi; Nejad, Mohammad Zamani Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Effect of lubricant contamination on friction and wear in an EHL sliding contact Autore: Sari, M. R.; Ville, Fabrice; Haiahem, A.; Flamand, Louis Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Statistical evaluation of low cycle stress-strain curves parameters for alloyed structural steels weld metals at room and elevated temperature Autore: Daunys, Mykolas; Stulpinaitė, A.; Šniuolis, R. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Structural optimization in product design process Autore: Povilionis, Audrius; Bargelis, Algirdas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool Autore: Aouici, Hamdi; Yallese, M.A.; Fnides, B.; Mabrouki, Tarek Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Modeling, experimental research and critical parameter analysis of glider’s dynamic characteristics Autore: Rugaitis, Aurimas; Juočas, K.; Volkovas, Vitalijus; Deksnys, Vytautas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Manipulation of a part on a vibrating plane under controlled dry friction Autore: Bakšys, Bronius; Liutkauskienė, K. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Development of cavitation applications for the remediation of contaminated water Autore: Bubulis, Algimantas; Bogorosh, A.T.; Jūrėnas, Vytautas; Voronov, S. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Computational analysis of the magnetorheological fluid loading unit of rowing simulator Autore: Grigas, Vytautas; Kazlauskienė, Kristina; Šulginas, A.; Toločka, R. T. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Impact of manufacturing engineering efficiency to the industry advancement Autore: Bargelis, Algirdas; Mankute, Rasa Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Post-elastic force-displacement dependence of bent and compressed column Autore: Kargaudas, Vytautas; Adamukaitis, Nerijus Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Control of physical surface by detecting coordinates Autore: Skeivalas, Jonas; Čygas, Donatas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation on thermo-acoustical instabilities related to a confined swirling burner Autore: Bode, Florin; Benea, R.; Hodor, Victor Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Numerical investigation of impact behaviour of sandwich fiber reinforced plastic composites Autore: Zeleniakienė, Daiva; Griškevičius, Paulius; Leišis, Vitalis; Milašienė, Daiva Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Diagnostics practice of heavy duty high speed gear transmissions Autore: Barzdaitis, Vytautas; Mazeika, Pranas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Simulation of normal impact of micron-sized particle with elastic-plastic contact Autore: Jasevičius, R.; Tomas, Juergen; Kačianauskas, R. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The experimental research of piezoelectric actuator with two vectors of polarization direction Autore: Lučinskis, Raimundas; Mažeika, Dalius; Hemsel, T.; Bansevičius, Ramutis Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Effect of sensor locations on the solution of inverse Stefan problems Autore: Nejad, A. Abbas; Maghrebi, M. J.; Tabrizi, H. Basirat Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Numerical simulation sequence in applying to facility for sports and entertainment skiing slopes Autore: Samofalov, Michail Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Computation film cooling from three different holes geometries Autore: Khorsi, Azzeddine; Azzi, Abbès Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Numerical analysis of hydrodynamic journal bearing under transient dynamic conditions Autore: Kumar, M. Senthil; Thyla, P. R.; Anbarasu, E. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Pneumatic transport of granular materials over plane using concentrated air flow Autore: Palšauskas, Mecys; Bozys, J.; Jotautienė, Egle Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation of resistance of nuclear fuel cladding to hydride cracking Autore: Makarevičius, V.; Grybėnas, A.; Kriūkienė, Rita Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Effect of explosive loading on mechanical properties of concrete and reinforcing steel: towards developing a predictive model Autore: Vaidogas, E. R.; Juocevičius, Virmantas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Diagnostic research of adaptive hydrodynamic segmental bearings with elastic ring in a rotor system Autore: Vekteris, Vladas; Čereška, Audrius; Jurevičius, Mindaugas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Optimization of the high-speed profile plunge grinding process Autore: Somov, Dmitrij; Bazaras, Zilvinas; Pupleviciute, A. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Influence of structure and mechanical properties for cyclic fracture rates of cast iron Autore: Leonavičius, M. K.; Krenevičius, A.; Bacevičius, Jonas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Strength and fracture criteria application in stress concentrators areas Autore: Žiliukas, Antanas; Surantas, Andrius; Žiogas, Giedrius Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Classic finite elements for simulation of piezoelectric smart structures Autore: Rahmoune, M.; Osmont, Daniel Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The investigation of fuel consumption of the ICE with traditional and modified work cycle Autore: Jakstas, Marijus Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The model of bent threaded connection in three segments Autore: Krenevičius, A.; Juchnevičius, Ž.; Leonavičius, M. K. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Influence of ply orientation on mode I interlaminar fracture toughness of woven carbon and glass composites Autore: Keršienė, Neringa; Žiliukas, Antanas; Keršys, Arturas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Engine working modes during tractors operational period Autore: Janulevičius, Algirdas; Juostas, Antanas; Pupinis, G. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Viscoplasticity coupled with nonlocalized damage for incompatibilities due to strain softening Autore: Pirali, P.; Liaghat, Gh. H.; Ahmadi, M. T. Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Automatic arc welding and overlaying welding of steel using waste materials powder Autore: Ambroza, Petras; Kavaliauskienė, Lina; Pupelis, Edmundas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: The effect of the relative location of laser beam with arc in different hybrid welding processes Autore: Kah, Paul; Salminen, Antti; Martikainen, Jukka Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Investigation of low cycle asymmetric torsion Autore: Daunys, Mykolas; Česnavičius, Ramunas Pubblicato: 2010
	Mechanika, Mechanika Volumes 2010: Optimization of foam filled spot-welded column for the crashworthiness design Autore: Shariati, M.; Saemi, Jafar; Sedighi, M. Pubblicato: 2010