zur Startseite der DMG-Lib
Home  · Übersicht  · Kontakt  ·

Erweiterte Suche   Mechanismensuche

Mechanika: Mechanika Volumes 2011


Volltext zu diesem Werk noch nicht verfügbar

Allgemeine Angaben

Autor Lehtovaara, Matti; Kokkonen, Kirsi; Rousku, Petri; Kässi, Tuomo; Štemberk, P.; Rainová, Aneta; Baurienė, Genovaite; Gąska, Damian; Pypno, Czeslaw; Juodvalkis, J.; Blaževičius, E.; Karbauskaitė, J.; Nenorta, Vidmantas; Augustaitis, Vytautas K.; Gičan, V.; Šešok, N.; Iljin, I.; Krasauskas, Povilas; Vaičiulis, Dainius; Bražėnas, Algis; Djeffal, Ali; Bounazef, M.; Adda bedia, E. A.; Pauk, J.; Griškevičius, Julius; Bučinskas, Vytautas; Kizauskiene, Losta; Kazanavicius, E.; Gaidys, Rimvydas; Huang, Zhonghua; Xie, Ya; Mokšin, Vadim; Vekteris, Vladas; Raid, A.; Boualem, Nour; Fridrici, Vincent; Kapsa, Philippe; Kibirkštis, Edmundas; Venytė, Ingrida; Mayik, V.; Vakulich, D.; Boukhelef, Dj.; Bounif, Abdel; Bouzid, Dj. Amar; Padgurskas, Juozas; Kreivaitis, Raimondas; Kupčinskas, Arturas; Žunda, Audrius; Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R.; Asad, Muhammad; Mabrouki, Tarek; Girardin, Francois; Zhang, Yancheng; Rigal, Jean-Francois; Ubartas, Martynas; Ostaševičius, Vytautas; Samper, Serge; Jūrėnas, Vytautas; Daukševičius, Rolanas; Jianli, Li; Min, Du; Jiancheng, Fang; Ragulskis, Kazimieras; Kanapeckas, Kestutis; Jonušas, Remigijus; Juzėnas, Kazimieras; ...
Erschienen  Kaunas University of Technology, Kaunas, 2011
Ausgabe  
Umfang  
ISBN
Sammlungen
Sonstige Publikationen
ab 2000
Übergeordnete Werke
 
no fulltext found Mechanika
Autor: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Erschienen: 1995-
Teile
 
thumbnail of30269009 Mechanika, Mechanika Volumes 2011: A new algorithm for cylindrical worm gears dimensioning based on the hydrodynamic lubrication conditions between the teeth flanks
Autor: Alexandru, Antal Tiberiu
Erschienen: 2011
thumbnail of30199009 Mechanika, Mechanika Volumes 2011: A nonprobabilistic set model of structural reliability based on satisfaction degree of interval
Autor: Huang, H.-Z.; Wang, Z.L.; Li, Y.F.; Huang, Bo; Xiao, N. C.; He, L. P.
Erschienen: 2011
thumbnail of30048009 Mechanika, Mechanika Volumes 2011: A reduction of the equations of the linear stationary vibrating systems without limitations of dissipation using the method of modal truncation
Autor: Augustaitis, Vytautas K.; Gičan, V.; Šešok, N.; Iljin, I.
Erschienen: 2011
thumbnail of30305009 Mechanika, Mechanika Volumes 2011: A sequencing approach of models in mixed-model assembly lines
Autor: Yongqian, Zheng; Yunpeng, Wang; Bo, Hu; Yongsheng, Wang
Erschienen: 2011
thumbnail of30241009 Mechanika, Mechanika Volumes 2011: A systematic method for identifying contradiction of casting process
Autor: Liu, Feng; Yang, Yi; Wu, Min
Erschienen: 2011
thumbnail of30369009 Mechanika, Mechanika Volumes 2011: Adaptive iterative learning control for vibration of flexural rectangular plate
Autor: Yang, Jingyu; Chen, Guoping
Erschienen: 2011
thumbnail of29817009 Mechanika, Mechanika Volumes 2011: Agent-based methodology for developing mechatronic systems software
Autor: Kizauskiene, Losta; Kazanavicius, E.; Gaidys, Rimvydas
Erschienen: 2011
thumbnail of29933009 Mechanika, Mechanika Volumes 2011: Aging investigation of metals of the pipes in Lithuanian Power Station
Autor: Daunys, Mykolas; Dundulis, Romualdas; Karpavičius, R.; Bortkevičius, R.
Erschienen: 2011
thumbnail of29921009 Mechanika, Mechanika Volumes 2011: Analysis of cylindrical piezoelectric actuator used in flow control device
Autor: Bansevičius, Ramutis; Rimašauskienė, Ruta; Mažeika, Dalius; Kulvietis, Genadijus
Erschienen: 2011
thumbnail of30193009 Mechanika, Mechanika Volumes 2011: Analysis of defects in stainless steel piping
Autor: Janulionis, R.; Dundulis, Gintautas; Karalevičius, R.
Erschienen: 2011
thumbnail of30303009 Mechanika, Mechanika Volumes 2011: Analysis of nonlinear vibration of coupled systems with cubic nonlinearity
Autor: Bayat, M.; Pakar, Iman; Shahidi, Mehran
Erschienen: 2011
thumbnail of30086009 Mechanika, Mechanika Volumes 2011: Analytical solution for thermal stresses of laminated hollow cylinders under transient nonuniform thermal loading
Autor: Ehteram, M. A.; Sadighi, Mojtaba; Tabrizi, H. Basirat
Erschienen: 2011
thumbnail of29994009 Mechanika, Mechanika Volumes 2011: Application of aggregate analysis for product design quality using QFD model and TOPSIS
Autor: Pang, Jihong; Zhang, Genbao; Chen, Guohua
Erschienen: 2011
thumbnail of30326009 Mechanika, Mechanika Volumes 2011: Application of strut-and-tie model on eccentric columns
Autor: Frantova, Michaela; Štemberk, P.; Vala, Vlastimil
Erschienen: 2011
thumbnail of29917009 Mechanika, Mechanika Volumes 2011: Applications of torsional vibrations for
Autor: Ragulskis, Kazimieras; Kanapeckas, Kestutis; Jonušas, Remigijus; Juzėnas, Kazimieras
Erschienen: 2011
thumbnail of30297009 Mechanika, Mechanika Volumes 2011: Best estimate analysis of processes in RBMK fuel rods during the operation cycle
Autor: Kaliatka, Tadas; Marao, Ausrinuke; Karalevičius, R.; Ušpuras, E.; Kaliatka, A.
Erschienen: 2011
thumbnail of30081009 Mechanika, Mechanika Volumes 2011: Biparametric shakedown design of steel frame structures
Autor: Jankovski, V.; Atkočiūnas, Juozas
Erschienen: 2011
thumbnail of30272009 Mechanika, Mechanika Volumes 2011: Buckling analysis of composite long cylinders using probabilistic finite element method
Autor: Cai, Baoping; Liu, Yonghong; Li, Huazhou; Liu, Zengkai
Erschienen: 2011
thumbnail of30101009 Mechanika, Mechanika Volumes 2011: Characterization of various coatings in terms of friction and wear for internal combustion engine piston rings
Autor: Guermat, A.; Monteil, Guy; Bouchetara, Mostefa
Erschienen: 2011
thumbnail of29786009 Mechanika, Mechanika Volumes 2011: Computer-aided generation of equations and structural diagrams for simulation of linear stationary mechanical dynamic systems
Autor: Augustaitis, Vytautas K.; Gičan, V.; Šešok, N.; Iljin, I.
Erschienen: 2011
thumbnail of30276009 Mechanika, Mechanika Volumes 2011: Control algorithm to reject the effect of iron sleepers for magnetic levitation vehicle using LSM with PM Halbach and ironless coil
Autor: Zhang, Xiao; Cheng, Hu; Li, Yungang
Erschienen: 2011
thumbnail of29826009 Mechanika, Mechanika Volumes 2011: Cutter cutting cobalt-rich crusts with water jet
Autor: Huang, Zhonghua; Xie, Ya
Erschienen: 2011
thumbnail of29812009 Mechanika, Mechanika Volumes 2011: Dependency of bearing noise properties on surfaces lubrication
Autor: Augustaitis, Vytautas K.; Bučinskas, Vytautas
Erschienen: 2011
thumbnail of30112009 Mechanika, Mechanika Volumes 2011: Design optimization of square aluminium damage columns with crashworthiness criteria
Autor: Allahbaksh, H. R.; Saemi, Jafar; Hourali, M.
Erschienen: 2011
thumbnail of30243009 Mechanika, Mechanika Volumes 2011: Design, workspace analysis and inverse kinematics problem of Delta parallel robot
Autor: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel
Erschienen: 2011
thumbnail of29799009 Mechanika, Mechanika Volumes 2011: Determination of stress strain state in pipe subjected to internal pressure at plane strain condition under elasto plastic loading
Autor: Vaičiulis, Dainius; Bražėnas, Algis
Erschienen: 2011
thumbnail of29971009 Mechanika, Mechanika Volumes 2011: Diagnostics of thermal fatigue cracks on continuous caster rolls surface
Autor: Yasniy, P.; Maruschak, P.; Konovalenko, I.; Bishchak, R.
Erschienen: 2011
thumbnail of29872009 Mechanika, Mechanika Volumes 2011: Dynamic characterization and stability analysis of hydrodynamic journal bearing using the FEM
Autor: Boukhelef, Dj.; Bounif, Abdel; Bouzid, Dj. Amar
Erschienen: 2011
thumbnail of29957009 Mechanika, Mechanika Volumes 2011: Dynamic response of axially loaded Euler-Bernoulli beams
Autor: Bayat, M.; Barari, A.; Shahidi, Mehran
Erschienen: 2011
thumbnail of30126009 Mechanika, Mechanika Volumes 2011: Dynamic simulations regarding the influence of the load-rigidity correlation on the working accuracy of a medical Triglide parallel robot
Autor: Rat, N. R.; Neagoe, M.; Diaconescu, Dorin Valentin; Stan, Sergiu D.
Erschienen: 2011
thumbnail of30155009 Mechanika, Mechanika Volumes 2011: Effect of friction stress of droplets with film on prediction of pressure changes in condensing tubes
Autor: Saffari, H.; Dalir, Ne
Erschienen: 2011
thumbnail of30343009 Mechanika, Mechanika Volumes 2011: Effect of process parameters on mechanical behavior in hot-slab rolling
Autor: Yang, Licheng; Ji, Jinchen; Hu, Jingxiang; Romagos, A.
Erschienen: 2011
thumbnail of29861009 Mechanika, Mechanika Volumes 2011: Effectiveness of twisted nematic liquid crystals as water based cutting fluid additive and tap lubricant
Autor: Mokšin, Vadim; Vekteris, Vladas
Erschienen: 2011
thumbnail of30391009 Mechanika, Mechanika Volumes 2011: Effects of VNT and IGV association on turbocharger centrifugal compressor performances
Autor: Izidi, L.; Liazid, A.
Erschienen: 2011
thumbnail of29787009 Mechanika, Mechanika Volumes 2011: Experimental and statistical investigation of thermo-mechanical friction drilling process
Autor: Krasauskas, Povilas
Erschienen: 2011
thumbnail of29901009 Mechanika, Mechanika Volumes 2011: Experimental investigation of vibrational drilling
Autor: Ubartas, Martynas; Ostaševičius, Vytautas; Samper, Serge; Jūrėnas, Vytautas; Daukševičius, Rolanas
Erschienen: 2011
thumbnail of30298009 Mechanika, Mechanika Volumes 2011: Experimental investigation of vibratory assembly with passive compliance
Autor: Bakšys, Bronius; Kilikevičius, Sigitas; Chadarovičius, Andrejus
Erschienen: 2011
thumbnail of30253009 Mechanika, Mechanika Volumes 2011: Experimental research of vibratory slipping of the shaft fastened with tightness in the bushing
Autor: Bakšys, Bronius; Mikolainis, Jurgis
Erschienen: 2011
thumbnail of30350009 Mechanika, Mechanika Volumes 2011: Fast discrete resolution of combustion process in diesel engine based on cylinder pressure parameter
Autor: Wang, Jun; Zhang, Youtong
Erschienen: 2011
thumbnail of29951009 Mechanika, Mechanika Volumes 2011: Fatigue life prediction for cyclically bent threaded connections
Autor: Juchnevičius, Ž.; Krenevičius, A.
Erschienen: 2011
thumbnail of30079009 Mechanika, Mechanika Volumes 2011: Finite element analysis about stator of opposed biconinal cone screw high-pressure seawater hydraulic pump
Autor: Wang, Xinhua; Cao, Xiuxia; Zheng, Gang; Sun, Shuwen; Li, Zhijie
Erschienen: 2011
thumbnail of30017009 Mechanika, Mechanika Volumes 2011: Fluid dynamics and motion simulation of underwater glide vehicle
Autor: Xiao-xu, DU; Bao-wei, SONG; Guang, PAN
Erschienen: 2011
thumbnail of29961009 Mechanika, Mechanika Volumes 2011: Fracture of laminated rectangular bar after buckling
Autor: Žiliukas, Antanas; Malatokienė, Ausra
Erschienen: 2011
thumbnail of30111009 Mechanika, Mechanika Volumes 2011: Free vertical oscillations in rowing
Autor: Bingelis, Algirdas; Pilkauskas, Kestutis; Pukėnas, K.; Čižauskas, Ginas
Erschienen: 2011
thumbnail of29903009 Mechanika, Mechanika Volumes 2011: Fuzzy modeling and compensation of scale factor for MEMS gyroscope
Autor: Jianli, Li; Min, Du; Jiancheng, Fang
Erschienen: 2011
thumbnail of29811009 Mechanika, Mechanika Volumes 2011: Ground reaction force and support moment in typical and flat-feet children
Autor: Pauk, J.; Griškevičius, Julius
Erschienen: 2011
thumbnail of30090009 Mechanika, Mechanika Volumes 2011: Heat transfer for film condensation of vapour
Autor: Šinkūnas, Stasys; Kiela, Algimantas
Erschienen: 2011
thumbnail of30313009 Mechanika, Mechanika Volumes 2011: High-cyclic failure analysis of welded cast iron plates
Autor: Stonkus, R.; Leonavičius, M.; Petraitis, G.; Stupak, S.
Erschienen: 2011
thumbnail of30028009 Mechanika, Mechanika Volumes 2011: Hybrid numerical-experimental investigation of two-degree-of-freedom piezoelectric positioning actuator
Autor: Bansevičius, Ramutis; Telksnytė, Simona; Janušas, Giedrius; Palevičius, Arvydas
Erschienen: 2011
thumbnail of29964009 Mechanika, Mechanika Volumes 2011: Inertial load stabilization in free load exercise machines
Autor: Grigas, Vytautas; Maskvytis, Robertas; Toločka, R. T.
Erschienen: 2011
thumbnail of30052009 Mechanika, Mechanika Volumes 2011: Influence of the tempering temperature and laser beam on hardness and wear of the overlay welded layers
Autor: Ambroza, Petras; Pilkaitė, Tilma; Pupelis, Edmundas
Erschienen: 2011
thumbnail of30190009 Mechanika, Mechanika Volumes 2011: Integrating wireless measurement and AI control in thermo-physiological clothing
Autor: Yao, Bao-guo; Li, Yi
Erschienen: 2011
thumbnail of29895009 Mechanika, Mechanika Volumes 2011: Investigation of dependences of metal sheet variable blank holding force
Autor: Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R.
Erschienen: 2011
thumbnail of29870009 Mechanika, Mechanika Volumes 2011: Investigation of geometrical and physical – mechanical parameters of Braille by assessing the different types of cardboard materials
Autor: Kibirkštis, Edmundas; Venytė, Ingrida; Mayik, V.; Vakulich, D.
Erschienen: 2011
thumbnail of30091009 Mechanika, Mechanika Volumes 2011: Investigation of interaction between acoustic field and nonhomogeneous building structures
Autor: Mikalauskas, Robertas; Volkovas, Vitalijus
Erschienen: 2011
thumbnail of30179009 Mechanika, Mechanika Volumes 2011: Investigation of multilayered packages resistance to free fall on the solid surface
Autor: Gegeckienė, Laurosius; Kibirkštis, Edmundas; Miliūnas, Valdas; Volkovas, Vitalijus
Erschienen: 2011
thumbnail of29775009 Mechanika, Mechanika Volumes 2011: Investigation of the steady state operation conditions of rotational vibroactuators
Autor: Baurienė, Genovaite
Erschienen: 2011
thumbnail of30201009 Mechanika, Mechanika Volumes 2011: Kinematic parameter identification of parallel robots for semi-physical simulation platform of space docking mechanism
Autor: Yu, Dayong; Chen, Weifang; Li, Hongren
Erschienen: 2011
thumbnail of30291009 Mechanika, Mechanika Volumes 2011: Low charge transport refrigerator (I). Refrigerant charge and strategies of charge reduction
Autor: Vaitkus, Liutauras
Erschienen: 2011
thumbnail of30115009 Mechanika, Mechanika Volumes 2011: Mathematical model of the operation of a weight batcher for dry products
Autor: Bendoraitis, Kostas; Paulauskas, Lionginas; Lebedys, Alis; Paulauskas, Saulius; Milčius, Eugenijus
Erschienen: 2011
thumbnail of30337009 Mechanika, Mechanika Volumes 2011: Measurement system of fuel consumption for diesel engine based on function link neural network
Autor: Wen-hua, YUAN; Yu-mei, LIU
Erschienen: 2011
thumbnail of30093009 Mechanika, Mechanika Volumes 2011: Mechanics and material aspects in serviceability prediction of the heat exchangers
Autor: Baskutis, S.; Vasauskas, Vytautas
Erschienen: 2011
thumbnail of30397009 Mechanika, Mechanika Volumes 2011: Microstructure formation on the basis of computer generated hologram
Autor: Palevičius, Arvydas; Janušas, Giedrius; Narijauskaitė, Birute; Palevičius, Ramutis
Erschienen: 2011
thumbnail of29993009 Mechanika, Mechanika Volumes 2011: Model of radial deformations of protector of vehicle tire
Autor: Sapragonas, Jonas; Dargužis, Andrius
Erschienen: 2011
thumbnail of30211009 Mechanika, Mechanika Volumes 2011: Modeling and diagnostics of the gear power transmissions
Autor: Barzdaitis, Vytautas; Mazeika, Pranas; Grigoniene, Jurgita; Didžiokas, Rimantas; Kartašovas, Valentines
Erschienen: 2011
thumbnail of30031009 Mechanika, Mechanika Volumes 2011: Modeling and simulation of active hydro-pneumatic suspension system through bond graph
Autor: Emami, M. D.; Mostafavi, S. A.; Asadollahzadeh, P.
Erschienen: 2011
thumbnail of29891009 Mechanika, Mechanika Volumes 2011: Modification of rapeseed oil with free fatty acids
Autor: Padgurskas, Juozas; Kreivaitis, Raimondas; Kupčinskas, Arturas; Žunda, Audrius
Erschienen: 2011
thumbnail of30120009 Mechanika, Mechanika Volumes 2011: Monitoring and identification of structural damages
Autor: Petkevičius, Kazimieras; Volkovas, Vitalijus
Erschienen: 2011
thumbnail of30056009 Mechanika, Mechanika Volumes 2011: Multi-valve intake port parametric design and performance optimization of the horizontal diesel engine
Autor: Changming, He; Sichuan, Xu; Chaofeng, Zuo; Xin, Chen; Chuanyou, Li
Erschienen: 2011
thumbnail of30140009 Mechanika, Mechanika Volumes 2011: Natural convection boundary layer along impermeable inclined surfaces embedded in porous medium
Autor: Kayhani, M. H.; Khaje, Esmaeil; Sadi, Meisam
Erschienen: 2011
thumbnail of30307009 Mechanika, Mechanika Volumes 2011: Numerical investigation of thermo-fluid dynamics of two triangular jets
Autor: Chitsaz, I.; Farhanich, B.
Erschienen: 2011
thumbnail of30011009 Mechanika, Mechanika Volumes 2011: Numerical simulation of a flow around an unmanned aerial vehicle
Autor: Meftah, S.M.A.; Imine, B.; Imine, O.; Adjlout, L.
Erschienen: 2011
thumbnail of30149009 Mechanika, Mechanika Volumes 2011: Numerical study of a turbulent jet flow issued from lobed diffuser
Autor: Boulenouar, M.; Meslem, Amina; Imine, B.; Nastase, Ilinca
Erschienen: 2011
thumbnail of30144009 Mechanika, Mechanika Volumes 2011: Numerical study on hydraulic and thermal characteristics of a minichannel heat sink with impinging air flow
Autor: Beriache, M.; Bettahar, A.; Loukarfi, L.; Saidia, L. Mokhtar; Naji, Hassane
Erschienen: 2011
thumbnail of30301009 Mechanika, Mechanika Volumes 2011: Parameter sensitivity analysis of axial vibration for lead-screw feed drives with time-varying framework
Autor: Zhou, Y.; Peng, F.Y.; Cao, X.H.
Erschienen: 2011
thumbnail of30123009 Mechanika, Mechanika Volumes 2011: Performance optimization of aluminium (U) type vibration based electromechanical Coriolis mass flow sensor using response surface methodology
Autor: Patil, Pravin P.; Sharma, Satish C.; Mishra, Roshan
Erschienen: 2011
thumbnail of30216009 Mechanika, Mechanika Volumes 2011: Poisson’s ratios influence on strength and stiffness of cylindrical bars
Autor: Partaukas, N.; Bareišis, Jonas
Erschienen: 2011
thumbnail of30055009 Mechanika, Mechanika Volumes 2011: Possibilities of analytical estimation of clay slope stability
Autor: Stelmokaitis, Gediminas; Ždankus, Narimantas T.
Erschienen: 2011
thumbnail of29768009 Mechanika, Mechanika Volumes 2011: Product modularity influences on firm performance: evidence from bioenergy technology
Autor: Lehtovaara, Matti; Kokkonen, Kirsi; Rousku, Petri; Kässi, Tuomo
Erschienen: 2011
thumbnail of30325009 Mechanika, Mechanika Volumes 2011: Prognosis of the steel aging of the pipe elbow in the Lithuanian Power Station
Autor: Daunys, Mykolas; Dundulis, Romualdas; Karpavičius, R.; Bortkevičius, R.
Erschienen: 2011
thumbnail of30082009 Mechanika, Mechanika Volumes 2011: RBF neural network robust adaptive control for wind generator system
Autor: Zuo, Y.; Wang, Yaonan; Zhang, Yancheng; Shen, Z. L.; Chen, Z. S.; Chen, J.; Xie, Q. Y.
Erschienen: 2011
thumbnail of30233009 Mechanika, Mechanika Volumes 2011: Real-time measurement of machine tool temperature fields and their effect on machining errors
Autor: Chen, C.; Zhang, J. F.; Wu, Zhijun; Feng, P. F.
Erschienen: 2011
thumbnail of30331009 Mechanika, Mechanika Volumes 2011: Research of solidity and reliability of mass customised products in a competitive manufacturing system
Autor: Čikotienė, Dalia; Ramonas, Z.; Bargelis, Algirdas
Erschienen: 2011
thumbnail of30139009 Mechanika, Mechanika Volumes 2011: Research of the mine imitator interaction with deformable soil and its practical realization
Autor: Fedaravičius, Algimantas; Kilikevičius, Sigitas; Survila, Arvydas; Šaulys, Povilas; Lendraitis, Vitas
Erschienen: 2011
thumbnail of29944009 Mechanika, Mechanika Volumes 2011: Research on the stability performances of the vehicle dynamics equivalent system based on the unsteady constraints
Autor: Wang, Guoye; Zhang, Juanli
Erschienen: 2011
thumbnail of30281009 Mechanika, Mechanika Volumes 2011: Residual modal energy evaluating of fatigue damaged composite structure
Autor: Amrane, M. N.; Sidoroff, François
Erschienen: 2011
thumbnail of29785009 Mechanika, Mechanika Volumes 2011: Rotary heat pump
Autor: Juodvalkis, J.; Blaževičius, E.; Karbauskaitė, J.; Nenorta, Vidmantas
Erschienen: 2011
thumbnail of30087009 Mechanika, Mechanika Volumes 2011: Self-tuning of position feedback and velocity feedback of active vibration isolation system with 6 DOFs
Autor: Liao, F. H.; Li, X. P.; Yuan, Z.Y.
Erschienen: 2011
thumbnail of30321009 Mechanika, Mechanika Volumes 2011: Simulation of different forming mode of wire based on thermo-mechanical coupling method
Autor: Yang, Licheng; Hu, Jingxiang; Ning, Liwei; Romagos, A
Erschienen: 2011
thumbnail of30246009 Mechanika, Mechanika Volumes 2011: Simulation of evaporating isopropyl alcohol droplets injected into a turbulent flow
Autor: Merouane, H.; Bounif, Abdel; Abidat, Miloud
Erschienen: 2011
thumbnail of29773009 Mechanika, Mechanika Volumes 2011: Simulation of hydration and cracking propagation with temperature
Autor: Štemberk, P.; Rainová, Aneta
Erschienen: 2011
thumbnail of29988009 Mechanika, Mechanika Volumes 2011: Simulation of products classification system for manufacturing cost forecasting
Autor: Stasiskis, Andrius; Čikotienė, Dalia; Bargelis, Algirdas
Erschienen: 2011
thumbnail of29780009 Mechanika, Mechanika Volumes 2011: Strength and elastic stability of cranes in aspect of new and old design standards
Autor: Gąska, Damian; Pypno, Czeslaw
Erschienen: 2011
thumbnail of30196009 Mechanika, Mechanika Volumes 2011: Stroboholography for the analysis of vibration modes of mechanical systems
Autor: Vasiliauskas, R.; Palevičius, Arvydas; Busilas, Alfredas; Pilkauskas, Kestutis
Erschienen: 2011
thumbnail of29967009 Mechanika, Mechanika Volumes 2011: Studies on deformation characteristics of albumen belkozin membranes using hysteresis loops technique
Autor: Paulauskas, Lionginas; Kairaitis, R.; Paulauskas, Saulius; Milčius, Eugenijus
Erschienen: 2011
thumbnail of30295009 Mechanika, Mechanika Volumes 2011: Study of local thermal nonequilibrium in porous media due to temperature sudden change and heat generation
Autor: Kayhani, M. H.; Abbasi, Ata O.; Sadi, Meisam
Erschienen: 2011
thumbnail of30229009 Mechanika, Mechanika Volumes 2011: Study of the thermal behaviour of dry contacts in the brake discs «application of software Ansys v11.0»
Autor: Belhocine, A.; Bouchetara, Mostefa
Erschienen: 2011
thumbnail of30376009 Mechanika, Mechanika Volumes 2011: Temperature fields, exchanges and deformations of a precise length comparator microscope
Autor: Barauskas, Rimantas; Kasparaitis, A.; Kaušinis, Saulius; Lazdinas, R.
Erschienen: 2011
thumbnail of30317009 Mechanika, Mechanika Volumes 2011: The erosion product catcher testing in the flow of combustion products with the use of thermophoresis effect
Autor: Abraitis, Rimgaudas; Blaževičius, E.; Abraitis, D.; Bočkus, Stasys; Čiuplys, Antanas
Erschienen: 2011
thumbnail of30355009 Mechanika, Mechanika Volumes 2011: The influence of parameters on penetration, speed and bridging in laser hybrid welding
Autor: Kah, Paul; Martikainen, Jukka; Salminen, Antti
Erschienen: 2011
thumbnail of30134009 Mechanika, Mechanika Volumes 2011: The structural synthesis of the parallel robots
Autor: Dolga, Valer; Dolga, Lia
Erschienen: 2011
thumbnail of29801009 Mechanika, Mechanika Volumes 2011: The use of laser interferometer to study the texture and wear of a preserved blades material
Autor: Djeffal, Ali; Bounazef, M.; Adda bedia, E. A.
Erschienen: 2011
thumbnail of29896009 Mechanika, Mechanika Volumes 2011: Towards a physical comprehension of material strengthening factors during macro to micro-scale milling
Autor: Asad, Muhammad; Mabrouki, Tarek; Girardin, Francois; Zhang, Yancheng; Rigal, Jean-Francois
Erschienen: 2011
thumbnail of30387009 Mechanika, Mechanika Volumes 2011: Transformation hardening of medium-carbon steel with a fiber laser: the influence of laser power and laser power density
Autor: Qiu, Feng; Kujanpää, Veli
Erschienen: 2011
thumbnail of29863009 Mechanika, Mechanika Volumes 2011: Wear fretting behavior of thick HA anodizing alumina layer
Autor: Raid, A.; Boualem, Nour; Fridrici, Vincent; Kapsa, Philippe
Erschienen: 2011
thumbnail of30038009 Mechanika, Mechanika Volumes 2011: Wear resistant layers obtained by using materials powder for overlay welding structural steel
Autor: Ambroza, Petras; Kavaliauskienė, Lina
Erschienen: 2011
Verknüpfte Datensätze
Dokumente: Mechanika
Product modularity influences on firm performance: evidence from bioenergy technology
Simulation of hydration and cracking propagation with temperature
Investigation of the steady state operation conditions of rotational vibroactuators
Strength and elastic stability of cranes in aspect of new and old design standards
Rotary heat pump
Computer-aided generation of equations and structural diagrams for simulation of linear stationary mechanical dynamic systems
Experimental and statistical investigation of thermo-mechanical friction drilling process
Determination of stress strain state in pipe subjected to internal pressure at plane strain condition under elasto plastic loading
The use of laser interferometer to study the texture and wear of a preserved blades material
Ground reaction force and support moment in typical and flat-feet children
Dependency of bearing noise properties on surfaces lubrication
Agent-based methodology for developing mechatronic systems software
Cutter cutting cobalt-rich crusts with water jet
Effectiveness of twisted nematic liquid crystals as water based cutting fluid additive and tap lubricant
Wear fretting behavior of thick HA anodizing alumina layer
Investigation of geometrical and physical – mechanical parameters of Braille by assessing the different types of cardboard materials
Dynamic characterization and stability analysis of hydrodynamic journal bearing using the FEM
Modification of rapeseed oil with free fatty acids
Investigation of dependences of metal sheet variable blank holding force
Towards a physical comprehension of material strengthening factors during macro to micro-scale milling
Experimental investigation of vibrational drilling
Fuzzy modeling and compensation of scale factor for MEMS gyroscope
Applications of torsional vibrations for
Analysis of cylindrical piezoelectric actuator used in flow control device
Aging investigation of metals of the pipes in Lithuanian Power Station
Research on the stability performances of the vehicle dynamics equivalent system based on the unsteady constraints
Fatigue life prediction for cyclically bent threaded connections
Dynamic response of axially loaded Euler-Bernoulli beams
Fracture of laminated rectangular bar after buckling
Inertial load stabilization in free load exercise machines
Studies on deformation characteristics of albumen belkozin membranes using hysteresis loops technique
Diagnostics of thermal fatigue cracks on continuous caster rolls surface
Simulation of products classification system for manufacturing cost forecasting
Model of radial deformations of protector of vehicle tire
Application of aggregate analysis for product design quality using QFD model and TOPSIS
Numerical simulation of a flow around an unmanned aerial vehicle
Fluid dynamics and motion simulation of underwater glide vehicle
Hybrid numerical-experimental investigation of two-degree-of-freedom piezoelectric positioning actuator
Modeling and simulation of active hydro-pneumatic suspension system through bond graph
Wear resistant layers obtained by using materials powder for overlay welding structural steel
A reduction of the equations of the linear stationary vibrating systems without limitations of dissipation using the method of modal truncation
Influence of the tempering temperature and laser beam on hardness and wear of the overlay welded layers
Possibilities of analytical estimation of clay slope stability
Multi-valve intake port parametric design and performance optimization of the horizontal diesel engine
Finite element analysis about stator of opposed biconinal cone screw high-pressure seawater hydraulic pump
Biparametric shakedown design of steel frame structures
RBF neural network robust adaptive control for wind generator system
Analytical solution for thermal stresses of laminated hollow cylinders under transient nonuniform thermal loading
Self-tuning of position feedback and velocity feedback of active vibration isolation system with 6 DOFs
Heat transfer for film condensation of vapour
Investigation of interaction between acoustic field and nonhomogeneous building structures
Mechanics and material aspects in serviceability prediction of the heat exchangers
Characterization of various coatings in terms of friction and wear for internal combustion engine piston rings
Free vertical oscillations in rowing
Design optimization of square aluminium damage columns with crashworthiness criteria
Mathematical model of the operation of a weight batcher for dry products
Monitoring and identification of structural damages
Performance optimization of aluminium (U) type vibration based electromechanical Coriolis mass flow sensor using response surface methodology
Dynamic simulations regarding the influence of the load-rigidity correlation on the working accuracy of a medical Triglide parallel robot
The structural synthesis of the parallel robots
Research of the mine imitator interaction with deformable soil and its practical realization
Natural convection boundary layer along impermeable inclined surfaces embedded in porous medium
Numerical study on hydraulic and thermal characteristics of a minichannel heat sink with impinging air flow
Numerical study of a turbulent jet flow issued from lobed diffuser
Effect of friction stress of droplets with film on prediction of pressure changes in condensing tubes
Investigation of multilayered packages resistance to free fall on the solid surface
Integrating wireless measurement and AI control in thermo-physiological clothing
Analysis of defects in stainless steel piping
Stroboholography for the analysis of vibration modes of mechanical systems
A nonprobabilistic set model of structural reliability based on satisfaction degree of interval
Kinematic parameter identification of parallel robots for semi-physical simulation platform of space docking mechanism
Modeling and diagnostics of the gear power transmissions
Poisson’s ratios influence on strength and stiffness of cylindrical bars
Study of the thermal behaviour of dry contacts in the brake discs «application of software Ansys v11.0»
Real-time measurement of machine tool temperature fields and their effect on machining errors
A systematic method for identifying contradiction of casting process
Design, workspace analysis and inverse kinematics problem of Delta parallel robot
Simulation of evaporating isopropyl alcohol droplets injected into a turbulent flow
Experimental research of vibratory slipping of the shaft fastened with tightness in the bushing
A new algorithm for cylindrical worm gears dimensioning based on the hydrodynamic lubrication conditions between the teeth flanks
Buckling analysis of composite long cylinders using probabilistic finite element method
Control algorithm to reject the effect of iron sleepers for magnetic levitation vehicle using LSM with PM Halbach and ironless coil
Residual modal energy evaluating of fatigue damaged composite structure
Low charge transport refrigerator (I). Refrigerant charge and strategies of charge reduction
Study of local thermal nonequilibrium in porous media due to temperature sudden change and heat generation
Best estimate analysis of processes in RBMK fuel rods during the operation cycle
Experimental investigation of vibratory assembly with passive compliance
Parameter sensitivity analysis of axial vibration for lead-screw feed drives with time-varying framework
Analysis of nonlinear vibration of coupled systems with cubic nonlinearity
A sequencing approach of models in mixed-model assembly lines
Numerical investigation of thermo-fluid dynamics of two triangular jets
High-cyclic failure analysis of welded cast iron plates
The erosion product catcher testing in the flow of combustion products with the use of thermophoresis effect
Simulation of different forming mode of wire based on thermo-mechanical coupling method
Prognosis of the steel aging of the pipe elbow in the Lithuanian Power Station
Application of strut-and-tie model on eccentric columns
Research of solidity and reliability of mass customised products in a competitive manufacturing system
Measurement system of fuel consumption for diesel engine based on function link neural network
Effect of process parameters on mechanical behavior in hot-slab rolling
Fast discrete resolution of combustion process in diesel engine based on cylinder pressure parameter
The influence of parameters on penetration, speed and bridging in laser hybrid welding
Adaptive iterative learning control for vibration of flexural rectangular plate
Temperature fields, exchanges and deformations of a precise length comparator microscope
Transformation hardening of medium-carbon steel with a fiber laser: the influence of laser power and laser power density
Effects of VNT and IGV association on turbocharger centrifugal compressor performances
Microstructure formation on the basis of computer generated hologram
Permanentlinks
DMG-Lib FaviconDMG-Lib https://www.dmg-lib.org/dmglib/handler?docum=29376009
Datenbereitsteller
TUITU Ilmenau  http://www.tu-ilmenau.de
Verwaltungsinformationen
Publikationsdatum 2011

×