Mechanika: Mechanika Volumes 2011

Full-text is not available at the moment

Información general
Autor	Lehtovaara, Matti; Kokkonen, Kirsi; Rousku, Petri; Kässi, Tuomo; Štemberk, P.; Rainová, Aneta; Baurienė, Genovaite; Gąska, Damian; Pypno, Czeslaw; Juodvalkis, J.; Blaževičius, E.; Karbauskaitė, J.; Nenorta, Vidmantas; Augustaitis, Vytautas K.; Gičan, V.; Šešok, N.; Iljin, I.; Krasauskas, Povilas; Vaičiulis, Dainius; Bražėnas, Algis; Djeffal, Ali; Bounazef, M.; Adda bedia, E. A.; Pauk, J.; Griškevičius, Julius; Bučinskas, Vytautas; Kizauskiene, Losta; Kazanavicius, E.; Gaidys, Rimvydas; Huang, Zhonghua; Xie, Ya; Mokšin, Vadim; Vekteris, Vladas; Raid, A.; Boualem, Nour; Fridrici, Vincent; Kapsa, Philippe; Kibirkštis, Edmundas; Venytė, Ingrida; Mayik, V.; Vakulich, D.; Boukhelef, Dj.; Bounif, Abdel; Bouzid, Dj. Amar; Padgurskas, Juozas; Kreivaitis, Raimondas; Kupčinskas, Arturas; Žunda, Audrius; Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R.; Asad, Muhammad; Mabrouki, Tarek; Girardin, Francois; Zhang, Yancheng; Rigal, Jean-Francois; Ubartas, Martynas; Ostaševičius, Vytautas; Samper, Serge; Jūrėnas, Vytautas; Daukševičius, Rolanas; Jianli, Li; Min, Du; Jiancheng, Fang; Ragulskis, Kazimieras; Kanapeckas, Kestutis; Jonušas, Remigijus; Juzėnas, Kazimieras; ...
Publicado	Kaunas University of Technology, Kaunas, 2011
Edición
Extensión
ISBN

Collections

		Otras publicaciones
		2000 y posteriores

Superordinate work

Mechanika
Autor: Daunys, Mykolas (Ed.); Ostaševičius, Vytautas (Ed.); Nenorta, Vidmantas (Ed.); Plath, Simon; Meyer, Stefan; Wollesen, V.M.; Bargelis, Algirdas; Höhne, Günter; Šačkus, A.; Fedaravičius, Algimantas; Bakšys, Bronius; Zabulionis, Darius; Lendraitis, Vitas; Seniūnas, Gediminas; Snitka, V.; Mizarienė, V.; Barauskas, Rimantas; Ollikainen, Mikael; Varis, Juha; Bagmutov, V.; Babichev, S.; K. Bobyliov; [...]
Publicado: 1995-

Parts

	Mechanika, Mechanika Volumes 2011: Product modularity influences on firm performance: evidence from bioenergy technology Autor: Lehtovaara, Matti; Kokkonen, Kirsi; Rousku, Petri; Kässi, Tuomo Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Simulation of hydration and cracking propagation with temperature Autor: Štemberk, P.; Rainová, Aneta Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Investigation of the steady state operation conditions of rotational vibroactuators Autor: Baurienė, Genovaite Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Strength and elastic stability of cranes in aspect of new and old design standards Autor: Gąska, Damian; Pypno, Czeslaw Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Rotary heat pump Autor: Juodvalkis, J.; Blaževičius, E.; Karbauskaitė, J.; Nenorta, Vidmantas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Computer-aided generation of equations and structural diagrams for simulation of linear stationary mechanical dynamic systems Autor: Augustaitis, Vytautas K.; Gičan, V.; Šešok, N.; Iljin, I. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Experimental and statistical investigation of thermo-mechanical friction drilling process Autor: Krasauskas, Povilas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Determination of stress strain state in pipe subjected to internal pressure at plane strain condition under elasto plastic loading Autor: Vaičiulis, Dainius; Bražėnas, Algis Publicado: 2011
	Mechanika, Mechanika Volumes 2011: The use of laser interferometer to study the texture and wear of a preserved blades material Autor: Djeffal, Ali; Bounazef, M.; Adda bedia, E. A. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Ground reaction force and support moment in typical and flat-feet children Autor: Pauk, J.; Griškevičius, Julius Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Dependency of bearing noise properties on surfaces lubrication Autor: Augustaitis, Vytautas K.; Bučinskas, Vytautas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Agent-based methodology for developing mechatronic systems software Autor: Kizauskiene, Losta; Kazanavicius, E.; Gaidys, Rimvydas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Cutter cutting cobalt-rich crusts with water jet Autor: Huang, Zhonghua; Xie, Ya Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Effectiveness of twisted nematic liquid crystals as water based cutting fluid additive and tap lubricant Autor: Mokšin, Vadim; Vekteris, Vladas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Wear fretting behavior of thick HA anodizing alumina layer Autor: Raid, A.; Boualem, Nour; Fridrici, Vincent; Kapsa, Philippe Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Investigation of geometrical and physical – mechanical parameters of Braille by assessing the different types of cardboard materials Autor: Kibirkštis, Edmundas; Venytė, Ingrida; Mayik, V.; Vakulich, D. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Dynamic characterization and stability analysis of hydrodynamic journal bearing using the FEM Autor: Boukhelef, Dj.; Bounif, Abdel; Bouzid, Dj. Amar Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Modification of rapeseed oil with free fatty acids Autor: Padgurskas, Juozas; Kreivaitis, Raimondas; Kupčinskas, Arturas; Žunda, Audrius Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Investigation of dependences of metal sheet variable blank holding force Autor: Bortkevičius, R.; Dundulis, Romualdas; Karpavičius, R. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Towards a physical comprehension of material strengthening factors during macro to micro-scale milling Autor: Asad, Muhammad; Mabrouki, Tarek; Girardin, Francois; Zhang, Yancheng; Rigal, Jean-Francois Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Experimental investigation of vibrational drilling Autor: Ubartas, Martynas; Ostaševičius, Vytautas; Samper, Serge; Jūrėnas, Vytautas; Daukševičius, Rolanas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Fuzzy modeling and compensation of scale factor for MEMS gyroscope Autor: Jianli, Li; Min, Du; Jiancheng, Fang Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Applications of torsional vibrations for Autor: Ragulskis, Kazimieras; Kanapeckas, Kestutis; Jonušas, Remigijus; Juzėnas, Kazimieras Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Analysis of cylindrical piezoelectric actuator used in flow control device Autor: Bansevičius, Ramutis; Rimašauskienė, Ruta; Mažeika, Dalius; Kulvietis, Genadijus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Aging investigation of metals of the pipes in Lithuanian Power Station Autor: Daunys, Mykolas; Dundulis, Romualdas; Karpavičius, R.; Bortkevičius, R. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Research on the stability performances of the vehicle dynamics equivalent system based on the unsteady constraints Autor: Wang, Guoye; Zhang, Juanli Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Fatigue life prediction for cyclically bent threaded connections Autor: Juchnevičius, Ž.; Krenevičius, A. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Dynamic response of axially loaded Euler-Bernoulli beams Autor: Bayat, M.; Barari, A.; Shahidi, Mehran Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Fracture of laminated rectangular bar after buckling Autor: Žiliukas, Antanas; Malatokienė, Ausra Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Inertial load stabilization in free load exercise machines Autor: Grigas, Vytautas; Maskvytis, Robertas; Toločka, R. T. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Studies on deformation characteristics of albumen belkozin membranes using hysteresis loops technique Autor: Paulauskas, Lionginas; Kairaitis, R.; Paulauskas, Saulius; Milčius, Eugenijus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Diagnostics of thermal fatigue cracks on continuous caster rolls surface Autor: Yasniy, P.; Maruschak, P.; Konovalenko, I.; Bishchak, R. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Simulation of products classification system for manufacturing cost forecasting Autor: Stasiskis, Andrius; Čikotienė, Dalia; Bargelis, Algirdas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Model of radial deformations of protector of vehicle tire Autor: Sapragonas, Jonas; Dargužis, Andrius Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Application of aggregate analysis for product design quality using QFD model and TOPSIS Autor: Pang, Jihong; Zhang, Genbao; Chen, Guohua Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Numerical simulation of a flow around an unmanned aerial vehicle Autor: Meftah, S.M.A.; Imine, B.; Imine, O.; Adjlout, L. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Fluid dynamics and motion simulation of underwater glide vehicle Autor: Xiao-xu, DU; Bao-wei, SONG; Guang, PAN Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Hybrid numerical-experimental investigation of two-degree-of-freedom piezoelectric positioning actuator Autor: Bansevičius, Ramutis; Telksnytė, Simona; Janušas, Giedrius; Palevičius, Arvydas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Modeling and simulation of active hydro-pneumatic suspension system through bond graph Autor: Emami, M. D.; Mostafavi, S. A.; Asadollahzadeh, P. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Wear resistant layers obtained by using materials powder for overlay welding structural steel Autor: Ambroza, Petras; Kavaliauskienė, Lina Publicado: 2011
	Mechanika, Mechanika Volumes 2011: A reduction of the equations of the linear stationary vibrating systems without limitations of dissipation using the method of modal truncation Autor: Augustaitis, Vytautas K.; Gičan, V.; Šešok, N.; Iljin, I. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Influence of the tempering temperature and laser beam on hardness and wear of the overlay welded layers Autor: Ambroza, Petras; Pilkaitė, Tilma; Pupelis, Edmundas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Possibilities of analytical estimation of clay slope stability Autor: Stelmokaitis, Gediminas; Ždankus, Narimantas T. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Multi-valve intake port parametric design and performance optimization of the horizontal diesel engine Autor: Changming, He; Sichuan, Xu; Chaofeng, Zuo; Xin, Chen; Chuanyou, Li Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Finite element analysis about stator of opposed biconinal cone screw high-pressure seawater hydraulic pump Autor: Wang, Xinhua; Cao, Xiuxia; Zheng, Gang; Sun, Shuwen; Li, Zhijie Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Biparametric shakedown design of steel frame structures Autor: Jankovski, V.; Atkočiūnas, Juozas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: RBF neural network robust adaptive control for wind generator system Autor: Zuo, Y.; Wang, Yaonan; Zhang, Yancheng; Shen, Z. L.; Chen, Z. S.; Chen, J.; Xie, Q. Y. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Analytical solution for thermal stresses of laminated hollow cylinders under transient nonuniform thermal loading Autor: Ehteram, M. A.; Sadighi, Mojtaba; Tabrizi, H. Basirat Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Self-tuning of position feedback and velocity feedback of active vibration isolation system with 6 DOFs Autor: Liao, F. H.; Li, X. P.; Yuan, Z.Y. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Heat transfer for film condensation of vapour Autor: Šinkūnas, Stasys; Kiela, Algimantas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Investigation of interaction between acoustic field and nonhomogeneous building structures Autor: Mikalauskas, Robertas; Volkovas, Vitalijus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Mechanics and material aspects in serviceability prediction of the heat exchangers Autor: Baskutis, S.; Vasauskas, Vytautas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Characterization of various coatings in terms of friction and wear for internal combustion engine piston rings Autor: Guermat, A.; Monteil, Guy; Bouchetara, Mostefa Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Free vertical oscillations in rowing Autor: Bingelis, Algirdas; Pilkauskas, Kestutis; Pukėnas, K.; Čižauskas, Ginas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Design optimization of square aluminium damage columns with crashworthiness criteria Autor: Allahbaksh, H. R.; Saemi, Jafar; Hourali, M. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Mathematical model of the operation of a weight batcher for dry products Autor: Bendoraitis, Kostas; Paulauskas, Lionginas; Lebedys, Alis; Paulauskas, Saulius; Milčius, Eugenijus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Monitoring and identification of structural damages Autor: Petkevičius, Kazimieras; Volkovas, Vitalijus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Performance optimization of aluminium (U) type vibration based electromechanical Coriolis mass flow sensor using response surface methodology Autor: Patil, Pravin P.; Sharma, Satish C.; Mishra, Roshan Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Dynamic simulations regarding the influence of the load-rigidity correlation on the working accuracy of a medical Triglide parallel robot Autor: Rat, N. R.; Neagoe, M.; Diaconescu, Dorin Valentin; Stan, Sergiu D. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: The structural synthesis of the parallel robots Autor: Dolga, Valer; Dolga, Lia Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Research of the mine imitator interaction with deformable soil and its practical realization Autor: Fedaravičius, Algimantas; Kilikevičius, Sigitas; Survila, Arvydas; Šaulys, Povilas; Lendraitis, Vitas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Natural convection boundary layer along impermeable inclined surfaces embedded in porous medium Autor: Kayhani, M. H.; Khaje, Esmaeil; Sadi, Meisam Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Numerical study on hydraulic and thermal characteristics of a minichannel heat sink with impinging air flow Autor: Beriache, M.; Bettahar, A.; Loukarfi, L.; Saidia, L. Mokhtar; Naji, Hassane Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Numerical study of a turbulent jet flow issued from lobed diffuser Autor: Boulenouar, M.; Meslem, Amina; Imine, B.; Nastase, Ilinca Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Effect of friction stress of droplets with film on prediction of pressure changes in condensing tubes Autor: Saffari, H.; Dalir, Ne Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Investigation of multilayered packages resistance to free fall on the solid surface Autor: Gegeckienė, Laurosius; Kibirkštis, Edmundas; Miliūnas, Valdas; Volkovas, Vitalijus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Integrating wireless measurement and AI control in thermo-physiological clothing Autor: Yao, Bao-guo; Li, Yi Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Analysis of defects in stainless steel piping Autor: Janulionis, R.; Dundulis, Gintautas; Karalevičius, R. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Stroboholography for the analysis of vibration modes of mechanical systems Autor: Vasiliauskas, R.; Palevičius, Arvydas; Busilas, Alfredas; Pilkauskas, Kestutis Publicado: 2011
	Mechanika, Mechanika Volumes 2011: A nonprobabilistic set model of structural reliability based on satisfaction degree of interval Autor: Huang, H.-Z.; Wang, Z.L.; Li, Y.F.; Huang, Bo; Xiao, N. C.; He, L. P. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Kinematic parameter identification of parallel robots for semi-physical simulation platform of space docking mechanism Autor: Yu, Dayong; Chen, Weifang; Li, Hongren Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Modeling and diagnostics of the gear power transmissions Autor: Barzdaitis, Vytautas; Mazeika, Pranas; Grigoniene, Jurgita; Didžiokas, Rimantas; Kartašovas, Valentines Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Poisson’s ratios influence on strength and stiffness of cylindrical bars Autor: Partaukas, N.; Bareišis, Jonas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Study of the thermal behaviour of dry contacts in the brake discs «application of software Ansys v11.0» Autor: Belhocine, A.; Bouchetara, Mostefa Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Real-time measurement of machine tool temperature fields and their effect on machining errors Autor: Chen, C.; Zhang, J. F.; Wu, Zhijun; Feng, P. F. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: A systematic method for identifying contradiction of casting process Autor: Liu, Feng; Yang, Yi; Wu, Min Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Design, workspace analysis and inverse kinematics problem of Delta parallel robot Autor: Szep, C.; Stan, Sergiu-D.; Csibi, Vencel Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Simulation of evaporating isopropyl alcohol droplets injected into a turbulent flow Autor: Merouane, H.; Bounif, Abdel; Abidat, Miloud Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Experimental research of vibratory slipping of the shaft fastened with tightness in the bushing Autor: Bakšys, Bronius; Mikolainis, Jurgis Publicado: 2011
	Mechanika, Mechanika Volumes 2011: A new algorithm for cylindrical worm gears dimensioning based on the hydrodynamic lubrication conditions between the teeth flanks Autor: Alexandru, Antal Tiberiu Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Buckling analysis of composite long cylinders using probabilistic finite element method Autor: Cai, Baoping; Liu, Yonghong; Li, Huazhou; Liu, Zengkai Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Control algorithm to reject the effect of iron sleepers for magnetic levitation vehicle using LSM with PM Halbach and ironless coil Autor: Zhang, Xiao; Cheng, Hu; Li, Yungang Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Residual modal energy evaluating of fatigue damaged composite structure Autor: Amrane, M. N.; Sidoroff, François Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Low charge transport refrigerator (I). Refrigerant charge and strategies of charge reduction Autor: Vaitkus, Liutauras Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Study of local thermal nonequilibrium in porous media due to temperature sudden change and heat generation Autor: Kayhani, M. H.; Abbasi, Ata O.; Sadi, Meisam Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Best estimate analysis of processes in RBMK fuel rods during the operation cycle Autor: Kaliatka, Tadas; Marao, Ausrinuke; Karalevičius, R.; Ušpuras, E.; Kaliatka, A. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Experimental investigation of vibratory assembly with passive compliance Autor: Bakšys, Bronius; Kilikevičius, Sigitas; Chadarovičius, Andrejus Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Parameter sensitivity analysis of axial vibration for lead-screw feed drives with time-varying framework Autor: Zhou, Y.; Peng, F.Y.; Cao, X.H. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Analysis of nonlinear vibration of coupled systems with cubic nonlinearity Autor: Bayat, M.; Pakar, Iman; Shahidi, Mehran Publicado: 2011
	Mechanika, Mechanika Volumes 2011: A sequencing approach of models in mixed-model assembly lines Autor: Yongqian, Zheng; Yunpeng, Wang; Bo, Hu; Yongsheng, Wang Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Numerical investigation of thermo-fluid dynamics of two triangular jets Autor: Chitsaz, I.; Farhanich, B. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: High-cyclic failure analysis of welded cast iron plates Autor: Stonkus, R.; Leonavičius, M.; Petraitis, G.; Stupak, S. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: The erosion product catcher testing in the flow of combustion products with the use of thermophoresis effect Autor: Abraitis, Rimgaudas; Blaževičius, E.; Abraitis, D.; Bočkus, Stasys; Čiuplys, Antanas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Simulation of different forming mode of wire based on thermo-mechanical coupling method Autor: Yang, Licheng; Hu, Jingxiang; Ning, Liwei; Romagos, A Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Prognosis of the steel aging of the pipe elbow in the Lithuanian Power Station Autor: Daunys, Mykolas; Dundulis, Romualdas; Karpavičius, R.; Bortkevičius, R. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Application of strut-and-tie model on eccentric columns Autor: Frantova, Michaela; Štemberk, P.; Vala, Vlastimil Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Research of solidity and reliability of mass customised products in a competitive manufacturing system Autor: Čikotienė, Dalia; Ramonas, Z.; Bargelis, Algirdas Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Measurement system of fuel consumption for diesel engine based on function link neural network Autor: Wen-hua, YUAN; Yu-mei, LIU Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Effect of process parameters on mechanical behavior in hot-slab rolling Autor: Yang, Licheng; Ji, Jinchen; Hu, Jingxiang; Romagos, A. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Fast discrete resolution of combustion process in diesel engine based on cylinder pressure parameter Autor: Wang, Jun; Zhang, Youtong Publicado: 2011
	Mechanika, Mechanika Volumes 2011: The influence of parameters on penetration, speed and bridging in laser hybrid welding Autor: Kah, Paul; Martikainen, Jukka; Salminen, Antti Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Adaptive iterative learning control for vibration of flexural rectangular plate Autor: Yang, Jingyu; Chen, Guoping Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Temperature fields, exchanges and deformations of a precise length comparator microscope Autor: Barauskas, Rimantas; Kasparaitis, A.; Kaušinis, Saulius; Lazdinas, R. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Transformation hardening of medium-carbon steel with a fiber laser: the influence of laser power and laser power density Autor: Qiu, Feng; Kujanpää, Veli Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Effects of VNT and IGV association on turbocharger centrifugal compressor performances Autor: Izidi, L.; Liazid, A. Publicado: 2011
	Mechanika, Mechanika Volumes 2011: Microstructure formation on the basis of computer generated hologram Autor: Palevičius, Arvydas; Janušas, Giedrius; Narijauskaitė, Birute; Palevičius, Ramutis Publicado: 2011